For Business-Class
Wireless 108G Exterior Access Point
+ Water/dustproof IP65 Standard6
+ Embedded 9dBi Panel Antenna
+ Connector for Optional High Gain
Multiple Operation Modes
+ Access Point
+ WDS with AP
+ Wireless Client
High Performance
The DAP-3220 Wireless 108G Exterior Access Point enabled, security is enhanced, since wireless
is the ideal solution for outdoor users that need users cannot peek at each other, and the possibility
network and Wi-Fi Internet access at al times. for data thievery is reduced. Administrators can,
+ IEEE 802.11g Wireless Standard
Designed especial y for outdoor environments, the however, disable this function, so wireless users at
+ Up to 54Mbps Wireless Speed
DAP-3220 al ows 802.11b/g devices to connect with an office can share hard disks and information, and
speeds of up to 108Mbps when using 108G Turbo peripherals such as wireless printers. The DAP-
+ D-Link 108G Technology with up to
3220 also supports AP grouping, al owing several
108Mbps Wireless Speeds *
access points to balance wireless network traffic
Powerful & Durable Outdoor Solution
and wireless clients among the AP with the same
Advanced Security Features
The DAP-3220 is designed to handle a wide variety SSID and different non-overlapping frequency
of outdoor environments. It has a die-cast watertight channels.
+ Multiple SSID and 802.1Q VLAN
housing, a built-in heater and a temperature sensor.
Supporting 802.3af Power over Ethernet (PoE), it can Network Management
+ WPA/WPA2-Enterprise/Personal
be placed at outdoor locations where power outlets Network administrators can manage DAP-3220
are not easily accessible. Besides functioning as an settings via web-based configuration or Telnet.
AP, this device can be can be configured to operate Administrators can use a Windows-based utility
+ 64/128/152-bit WEP Encryption
as a Wireless Distribution System (WDS) to act as cal ed AP Manager to automatical y locate all
+ MAC Address Filtering
a bridge for linking together networks in different wireless devices instal ed on the network and do
+ Rogue AP Detection
bulk configuration of multiple AP to save time and
Advanced Network Security
Convenient Outdoor Installa-
The DAP-3220 supports 64/128/152-bit WEP data
encryption and WPA/WPA2 security functions. In
addition, it provides MAC Address Filtering to control
+ 802.3af Power over Ethernet (PoE)
user access, and the Disable SSID Broadcast
function to limit outsiders’ access to the internal
+ Locking Brackets Included
Network Flexibility and Efficiency
Easy Management
The DAP-3220 supports up to 8 SSID, al owing the
+ Web Browser (HTTP, HTTPS)
administrators to logically divide the access point
into several virtual access points al within a single
+ Telnet/SSH
hardware platform. Rather than having separate
+ SNMPv1/v2c/v3
networks with several access points, administrators
+ AP Manager II Software Included
can deploy one single AP to support more than
one application, such as public Internet access
* 108Mbps Turbo mode only available when operating with
and internal network control to increase flexibility
other D-Link 108G wireless devices
and keep costs down. The DAP-3220 supports
802.1Q VLAN Tagging, operating with multiple
SSID to segment traffic to enhance performance
and security. The DAP-3220 provides WLAN STA
partitioning, a function useful for deployments such
as hot spots. With station-to-station partitioning

Wireless 108G Exterior Access Point
Technical Specifications
+ IEEE 802.11b/g WLAN
+ IEEE 802.3/802.3u Ethernet
+ IEEE 802.3x Flow Control
+ IEEE 802.3af PoE
Ethernet Interface
+ 10/100BASE-TX Ethernet port
Radio and Modulation Type
For 802.11b:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
Operating Frequency
For 802.11b:
+ 2400 to 2497MHz
For 802.11g:
+ 2400 to 2483.5MHz
Channel Numbers
+ 11 Channels (FCC)
+ 13 Channels (ETSI)
Data Rates 1
+ 802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+ 802.11b: 11, 5.5, 2, and 1Mbps
Maximum Transmit Output Power 2
17dBm (typical)
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna5
Receiver Sensitivity
+ For 802.11b, at 8% PER:
11Mbps: –83dBm
+ For 802.11g, at 10% PER:

Wireless 108G Exterior Access Point
+ 64/128/152-bit WEP data encryption
+ TKIP, AES support
+ MAC address filtering user access
+ WLAN STA partitioning
+ Multiple SSID for network segmentation
+ SSID broadcast disable function
+ 802.1Q VLAN Tagging
+ Rogue AP detectionl
Quality of Service
+ Wireless Multimedia (WMM)
Configurable Operation Modes
+ Access Point
+ WDS with AP
+ Wireless Client
Performance Enhancement
+ AP grouping for load balance
Device Management
+ Web Browser Interface:
- Secure HTTP (HTTPS)
+ AP Manager II
+ SNMP support:
- D-View module
- Private MIB
+ Command Line Interface:
- Telnet
Diagnostic LEDs
+ Power
Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) 3

Wireless 108G Exterior Access Point
Operating Voltage
48VDC +/- 10% for PoE
Power Consumption
+ 13.5 watts (max.) with PoE (with heater ON) 4
+ 190 (L) x 160 (W) x 55 (H) mm
+ 649g (Without mounting kit)
Operating Temperature
-20˚ to +60˚ C
Storage Temperature
-20˚ to +65˚ C
Operating Humidity
10% to 90% non-condensing, all-weather enclosure
Regulation Certification
+ FCC Class B
+ CE
+ IP 65
+ C-Tick
+ Wi-Fi
+ IC
+ CSA International
1 54Mbps maximum wireless signal rate derived from IEEE standard 802.11b and 802.11g specifications. Actual data throughput will vary. 108Mbps when operating
with other D-Link 108G wireless devices. Network conditions and environmental factors, including volume of network traffic c, building materials and construction,
and network overhead lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
2 Maximum power setting will vary according to individual country regulations.
3 This device can be mounted on a pole using an optional mounting kit (part number B15900-0033000).
4 Power consumption may exceed 802.3af PoE standard when heater is in operation; connect this device through the included PoE Base Unit.
5 Embedded patch antenna will be disabled when optional antenna is connected.
6 IP65 standard means the device is protected from dust and low pressure jets of water from all directions - limited ingress permitted. It is recommended to place this
device under a roof.
ACN 052 202 838
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2008 D-Link Corporation. All rights reserved.
Release 02 (November 2008)