System Requirements
DCS-6620 Install Guide
System Requirements
Minimum System Requirements:
 Internet Explorer Version 6.0 or above
 CPU Pentium 4, 2.0GHz plus processor
 Memory Size: 128MB or above
 32MB AGP Video Card
Package Contents
D-Link Systems, Inc.

DCS-6620 Install Guide
Hardware Overview
Hardware Overview

Motorized Zoom Lens
Link LED
Power LED
D-Link Systems, Inc.

Hardware Overview
DCS-6620 Install Guide
A/V out
External I/O Port
External Mic.
Ethernet 10/100 RJ45 socket
Power Cord socket
Connect the power adapter jack to the PTZ Internet Camera before plugging
in to a power socket. This will reduce the risk of accidental electric shock.
D-Link Systems, Inc.

DCS-6620 Install Guide
Hardware Installation
Hardware Installation
Connect the Ethernet Cable
Connect one end of the Ethernet cable to the network cable connector located on
the back panel of the DCS-6620, and attach the other end to a router, switch, or
gateway on the network.
If you connect this camera
directly to a PC, you will
need a cross-over Ethernet cable.
If you plug the camera into a hub
or router, you will be able to use the
cable included with your camera.
Attach the External Power Supply
Attach the external power supply to the DC
power input connector located on the PTZ
Internet Camera’s backpanel (labeled 12V) and
connect it to an AC power outlet.
Power source is confirmed when
the LED Power Indicator on the
PTZ Internet Camera is illuminated.
Both the red and green LEDs will flash alternately and only the red LED will remain
lit. The green LED will not come on until you have configured your camera.
D-Link Systems, Inc.

Hardware Installation (continued)
DCS-6620 Install Guide
Attach the A/V cable to the A/V out
connector if you wish to connect the
DCS-6620 to your TV set.
Attach the yellow RCA connector to
the “video” connector on your TV.
Attach the white RCA connector to
the “audio” connector on your TV.
D-Link Systems, Inc.

DCS-6620 Install Guide
Installation Wizard
Installation Wizard
Insert the DCS-6200 CD into the
CD-ROM drive.
Click on Install Software.
Click on Install Wizard.
Click Next
D-Link Systems, Inc.

Installation Wizard (continued)
DCS-6620 Install Guide
Click Next
Click Next
Click Finish
D-Link Systems, Inc.

DCS-6620 Install Guide
Camera Configuration
Camera Configuration
Double-click on the Installation
icon, which should have
been created on your desktop.
The software will search for cameras.
The Installation Wizard will now show
a MAC address of the DCS-6620 and
an IP Address (which may or may not
be correct depending on what you
have your DCS-6620 connected to).
If you have a DHCP* server on your
network, there will be a valid IP Address
displayed here. After a few seconds, the
“assigned” column will display yes,
indicating that the displayed IP Address
is now assigned to the camera.
*A DHCP server is a device that supplies IP Addresses to
its clients that are on the same network.
D-Link Systems, Inc.

Camera Configuration (continued)
DCS-6620 Install Guide
If the Installation Wizard does not display
any devices, you will need to find a
tool small enough to fit into the reset
hole and softly press down a switch for
2 cycles (about 5-7 seconds). The red
and green LEDs will blink continuously
and stop twice. Let go when the red
LED starts to flash the second time.
Click Search to refresh the
list of cameras if needed.
Once the camera appears,
select the camera by placing
a Checkmark in the box.
D-Link Systems, Inc.

DCS-6620 Install Guide
Camera Configuration (continued)
Click the Setup button.
Enter an administrative password in
the Admin password and Confirm
password fields.
Click the Next button.
For details on the Date/Time
Settings, please refer to the
User Manual on the CD-ROM.
D-Link Systems, Inc.

Camera Configuration (continued)
DCS-6620 Install Guide
Uncheck the box labeled Reset
IP address at the next boot.
Click the Next button.
If you need to modify the IP
settings, please refer to the
user manual on the CD-ROM.
Click the Apply button.
D-Link Systems, Inc.

DCS-6620 Install Guide
Camera Configuration (continued)
After the settings have been saved,
the Done button will appear.
Click the Done button.
Click the button labeled
Link to Selected Device(s).
D-Link Systems, Inc.

Viewing you PTZ Internet Camera
DCS-6620 Install Guide
Viewing your PTZ Internet Camera
After you click the button labeled
Link to Devices(s), the Installation
will automatically open your
Internet browser to the IP Address of
the DCS-6620, in this example it is: Your DSC-6620
may have a different IP Address.
The installation and configuration of the DCS-6620
PTZ Internet Camera is now complete.
D-Link Systems, Inc.

DCS-6620 Install Guide
D-Link Systems, Inc.

Technical Support
D-Link’s website contains the latest user documentation and software updates
for D-Link products.
D-Link provides free technical support for customers within the United States
and Canada for the duration of the product’s warranty period.
U.S. and Canadian customers can contact D-Link Technical Support through
our website or by phone.
United States
(877) 453-5465
Twenty four hours a day, seven days a week.
World Wide Web
(800) 361-5265
Monday through Friday, 7:30am to 12:00am EST.
World Wide Web

Version 1.0
©2005 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and Securicam
are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and
other countries. Other trademarks are the property of their respective owners. All references to speed are for
comparison purposes only. Product specifications, size, and shape are subject to change without notice, and
actual product appearance may differ from that depicted herein. Visit for more details.
DCS-6620 04292005