Version 1.02 | 05/31/2016
User Manual
Vigilance Full HD Outdoor Vandal-Proof PoE Dome Camera

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and
Manual Revisions
DCS-4602EV Revision A1 with firmware version 1.00
Added DCS-37-1/DCS-37-2 information
Update Regulatory Information
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2016 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
D-Link DCS-4602EV User Manual

Table of Contents
Product Overview ........................................................4
Time and Date ..................................................................42
Package Contents ................................................................. 4
Event Setup .......................................................................43
Introduction ............................................................................ 5
Advanced ...............................................................................50
System Requirements ......................................................... 5
ICR and IR ...........................................................................50
Features .................................................................................... 6
HTTPS ..................................................................................51
Hardware Overview ............................................................. 7
Access List ..........................................................................52
Installation ...................................................................9
SNMP ...................................................................................53
Mounting the Camera ......................................................... 9
Maintenance .........................................................................55
Using the DCS-37-1 Mount (optional) .........................12
Device Management .....................................................55
Using the DCS-37-2 Mount (optional) .........................14
System ................................................................................56
Waterproofing Your Installation ....................................16
Firmware Upgrade ..........................................................57
Software Installation ......................................................19
Status ......................................................................................58
Configuration ............................................................22
Device Info ........................................................................58
Using the Configuration Interface ................................22
Logs .....................................................................................59
Live Video ..............................................................................24
Setup .......................................................................................26
Technical Specifications ............................................61
Setup Wizard ....................................................................26
Regulatory Information ............................................64
Network Setup .................................................................31
Dynamic DNS ...................................................................34
Image Setup .....................................................................35
Video ...................................................................................37
Preset ...................................................................................39
Motion Detection ...........................................................41
D-Link DCS-4602EV User Manual

Section 1: Product Overview
Product Overview
Package Contents
DCS-4602EV Vigilance Full HD Outdoor Vandal-Proof PoE Dome Camera
Cable Waterproofing Connector
Rubber Power Connector Plug
Mounting Kit
CD-ROM with User Manual and software
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Safety Notice: Installation and servicing should be done by certified technicians so as
to conform to all local codes and prevent voiding your warranty.
D-Link DCS-4602EV User Manual

Section 1: Product Overview
Congratulations on your purchase of the DCS-4602EV Vigilance Full HD Outdoor Vandal-Proof PoE Dome Camera. The
DCS-4602EV is a professional surveil ance and security solution for smal , medium, and large enterprises alike. The DCS-4602EV
uses a Full HD progressive scan CMOS sensor; the professional sensor results in low noise and high sensitivity capabilities ideal
for surveillance applications.
The DCS-4602EV is a complete system with a built-in CPU and incorporates a web server, allowing it to transmit excellent real-
time Full HD resolution video for security and outdoor surveillance.
The DCS-4602EV can be accessed remotely, controlled and configured from any PC/Notebook over your local network or through
the Internet via a web browser. The simple installation and intuitive web-based interface offer easy configuration across the
full range of its advanced feature set, including granular control over multiple video streams with different configurations and
multicast video streams which helps you manage your network load.
The DCS-4602EV has an IP66 certified weatherproof housing designed for both indoor and outdoor applications. The built-
in removable IR-cut filter and IR LEDs give the DCS-4602EV the capability to view up to 20M at night. The DCS-4602EV
also incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for
supplemental power cabling. The combination of IP66 weatherproof housing, IK10 vandal-proof housing, IR-Cut Filter, IR LEDs,
and PoE make the DCS-4602EV an ideal solution for a dependable and cost-effective 24 hour surveillance solution with easy
clutter-free installation.
System Requirements
• Computer with Microsoft Windows® 8, 7, or Vista® (for CD-ROM Setup Wizard), Mac OS or Linux
• Internet Explorer 7, Firefox 20, or Safari 6 or higher
• Existing 10/100 Ethernet-based network with an available 802.3af Power over Ethernet (PoE) port
D-Link DCS-4602EV User Manual

Section 1: Product Overview
Simple to Maintain
The DCS-4602EV is a stand-alone system with a built-in CPU, requiring no special hardware or software. The DCS-4602EV can be viewed and managed
through most web browsers, including Internet Explorer®, Chrome®, Firefox®, and Safari®.
Supports a Variety of Platforms
With support for TCP/IP networking, HTTP, and other Internet related protocols, the DCS-4602EV can also be integrated easily into other Internet/
Intranet applications because of its standards-based features. The DCS-4602EV works with any 10/100 Ethernet network, making the DCS-4602EV
easy to integrate into your existing network environment.
Advanced Event Management
The DCS-4602EV can be set up to send e-mail notifications with snapshots when an event occurs, such as when motion is detected. Events can be
triggered from several sources, such as motion detection and time based events.
IR LEDs for Day and Night Functionality
The built-in infrared LEDs enable night time viewing of up to 20 meters.
IP66 Weatherproof and Vandal-proof Housing
The DCS-4602EV uses an IP66 weatherproof housing, allowing you to rest assured that in the toughest of conditions, it will continue to provide
round-the-clock surveillance.
PoE (Power over Ethernet) for Flexible Installation
The DCS-4602EV can draw all the power it needs from a PoE switch or PoE injector for a simple and clutter-free installation.
Remote Monitoring Utility
The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to configure and access
the Network Camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing
up to 32 cameras on one screen, and taking snapshots.
D-Link DCS-4602EV User Manual

Section 1: Product Overview
Hardware Overview
Protective Cover
Fixed lens to record video of the surrounding area
Cover Screws
The three screws can be removed with the included wrench
Camera Lens
Fixed lens to record video of the surrounding area
Inner Cover
Covers the camera components
Reset Button
Press and hold for 10 seconds to reset camera back to the factory default settings
Provide illumination for low-light environments
Tilt Adjustment Screw
Can be loosened to adjust camera angle
D-Link DCS-4602EV User Manual

Section 1: Product Overview
Power Connector
Connects to an optional 12 V / 1.5 A power adapter (not included)
Ethernet Jack
RJ-45 connector for Ethernet which can also be used to power the camera using
Power over Ethernet (PoE)
Grounding Screw
Can be attached to a grounding wire if desired
D-Link DCS-4602EV User Manual

Section 2: Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then
insert the wall anchors into the holes.
If you are running the camera cables through the wall or ceiling, drill a hole
in the center and pull the cables through the hole.
Step 2
Use the included wrench to loosen the 3 screws on the top of the camera, then
lift the camera cover off.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 3
Use the screws provided to mount the camera to the wall or ceiling.
If you are running the camera cables out the side of the camera, guide the
camera cables through the cable channel on the base.
Step 4
Connect the power and Ethernet cables, or just the Ethernet cable if you are using
a PoE connection.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 5
To adjust the camera's angle, pull the black inner cover and remove it from the
Loosen the adjustment screw on the side of the camera, then retighten it after
moving the camera to the desired angle. You can also rotate the camera by
grasping the camera and turning it left or right.
When you are done adjusting the camera's angle, put the inner cover back into
Note: The camera has a limited range of motion. If it stops when you are adjusting
it, do not attempt to rotate or tilt the camera any further in that direction.
Step 6
Reattach the camera cover.
If you need to waterproof your installation, please refer to "Waterproofing Your
Installation" on page 16
D-Link DCS-4602EV User Manual

Section 2: Installation
Using the DCS-37-1 Mount (optional)
To mount the camera with the DCS-37-1 mount, follow the instructions below.
Step 1
Place the DCS-37-1 mounting sticker in the desired location, then use a 6 mm
drill bit to drill the required holes 25 mm deep and insert the wall anchors into
the holes. If you plan to pass cables through the wall, you will also need to drill
a hole for the cable channel.
Step 2
Use the provided screws to mount the DCS-37-1 to the wall.
Step 3
Remove the cover from the camera.
Pass the camera connectors through the back or bottom cable channel on the
DCS-37-1. Use the provided screws to mount the camera to the DCS-37-1 using
the set of mounting holes marked A.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 4
Remove the inner cover and adjust the angle and rotation of the camera as
desired, then put the inner cover back in place.
Step 5
Attach the camera cover.
If you are passing the camera cables through the wall, place the rubber stopper
into the bottom cable channel to seal it.
D-Link DCS-4602EV User Manual

Section 2: Installation
Using the DCS-37-2 Mount (optional)
To mount the camera with the DCS-37-2 mount, follow the instructions below.
Step 1
Place the DCS-37-2 mounting sticker in the desired location, then use a 6 mm
drill bit to drill the required holes 25 mm deep and insert the wall anchors into
the holes. If you plan to pass cables through the wall, you will also need to drill
a hole for the cable channel.
Step 2
Use the provided screws to mount the DCS-37-2 to the wall using the inner
mounting holes.
Step 3
Remove the cover from the camera.
Pass the camera connectors through the back or side cable channel on the DCS-
37-2. Use the provided screws to mount the camera to the DCS-37-2 using the
set of mounting holes marked A.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 4
Remove the inner cover and adjust the angle and rotation of the camera as
desired, then put the inner cover back in place.
Step 5
Attach the camera cover.
If you are passing the camera cables through the wall, place the rubber stopper
into the bottom cable channel to seal it.
D-Link DCS-4602EV User Manual

Section 2: Installation
Waterproofing Your Installation
To waterproof your camera installation, follow the instructions below. Round Ethernet cable, a crimping tool, and RJ-45 plugs
are required for this procedure.
Step 1
Place the washer around the base of the Ethernet connector as shown.
Step 2
Thread bare Ethernet cable through the waterproof connector as shown, then
crimp an RJ-45 plug onto the cable.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 3
Connect the RJ-45 plug into the Ethernet connector, then screw the waterproof
connector to the Ethernet connector by turning it about a half-turn clockwise.
Step 4
Screw the back part of the waterproof connector clockwise until there is a tight
seal around the Ethernet cable.
If you are using PoE to power your camera, use the included rubber power
connector plug to the power connector.
D-Link DCS-4602EV User Manual

Section 2: Installation
If you are using a power adapter (not included) to power your camera, wind
waterproof tape around the connection in an overlapping manner to cover it.
D-Link DCS-4602EV User Manual

Section 2: Installation
Software Installation
Step 1
Insert the DCS-4602EV CD into your computer's CD-ROM drive to begin the
If the Autorun function on your computer is disabled, or if the D-Link Launcher
fails to start automatically, click the Start button and type D:\autorun.exe (where
D: represents the drive letter of your CD-ROM drive) and press Enter.
Step 2
Click on the D-Link Setup Wizard SE icon that was created in your Windows
Start menu (Start > D-Link > Setup Wizard SE).
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 3
The Setup Wizard will appear and display the MAC address and IP address of your
camera(s). If you have a DHCP server on your network, a valid IP Address will be
displayed. If your network does not use a DHCP server, the network camera's
default static IP will be displayed.
Select your camera, then click the Wizard button to continue.
Step 4
Enter the Admin ID and password. When logging in for the first time, the default
Admin ID is admin with the password left blank.
Click the checkboxes if you wish to change the admin ID and password for the
camera, and enter the new ID and password you wish to use.
Click Next to continue.
D-Link DCS-4602EV User Manual

Section 2: Installation
Step 5
Select DHCP if your camera obtains an IP address automatically from a DHCP
server such as a router. Select Static IP if you want to manually enter the IP
settings for the camera.
Click Next to continue.
Step 6
Take a moment to confirm your settings and click Restart.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Using the Configuration Interface
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration
utility is designed to allow you to easily access and configure your DCS-4602EV. At the end of the wizard, click Link, or enter
the IP address of your camera into a web browser, such as Firefox. To log in, use the User name admin and the password you
created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password,
click OK.
Step 1
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start
menu (Start > D-Link > Setup Wizard SE).
Step 2
Select the camera and click Link to access the web configuration.
The Setup Wizard will automatically open your web browser to the IP address of
the camera.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Step 3
Enter admin as the default username and leave the password blank. Click OK to
Step 4
This section displays your camera’s live video. You can select your video profile
and view or operate the camera.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Live Video
This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your
language using the drop-down menu on the left side of the screen.
You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.
Motion Trigger
This indicator will change color when a trigger event occurs.
Note: The video motion feature for your camera must be
When a recording is in progress, this indicator will change
This control pad can be used to electronically pan, tilt, and
Control Pad
zoom (ePTZ) within the camera's predefined view area, if one
has been defined.
Auto Pan
Starts the automatic panning function. The ROI will pan from
back and forth within the FOV.
Stops the camera ePTZ motion.
Preset Path
Starts the camera's motion along the predefined path.
D-Link DCS-4602EV User Manual

Section 3: Configuration
ePTZ Speed: You may select a value between 0 and 10. 0 is the slowest and 10 is the
Global View: This window indicates the total field of view (FOV) of the camera. The
red box indicates the visible region of interest (ROI).
Language: You may select the interface language using this menu.
Video Profile 1
Record a Video Clip
Video Profile 2
Set a Storage Folder
Full screen mode
Take a Snapshot
Go To: If any presets have been defined, you can select them here to move the
(Preset List) camera to the selected preset.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Setup Wizard
To configure your Network Camera, click Internet Connection Setup Wizard. Alternatively,
you may click Manual Internet Connection Setup to manually configure your Network
Camera and skip to "Network Setup" on page 31.
To quickly configure your Network Camera’s motion detection settings, click Motion
Detection Setup Wizard. If you want to enter your settings without running the wizard, click
Manual Motion Detection Setup and skip to"Motion Detection" on page 41.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the internet. Click Next to continue.
Select how the camera will connect to the Internet.
If your camera is connected to a router, or you are unsure how your camera will
connect to the Internet, select DHCP Connection.
Select Static IP if your Internet Service Provider has provided you with connection settings, or
if you wish to set a static address within your home network. Enter the correct configuration
information and click Next to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name and password.
Click Next to continue.
D-Link DCS-4602EV User Manual

Section 3: Configuration
If you have a Dynamic DNS account and would like the camera to update your IP address
automatically, Select Enable DDNS and enter your host information. Click Next to continue.
Enter a name for your camera and click Next to continue.
Configure the correct time to ensure that all events will be triggered as scheduled. Click Next
to continue.
If you have selected DHCP, you will see a summary of your settings, including the camera's IP
address. Please write down all of this information as you will need it in order to access your
Click Apply to save your settings.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to configure your camera's
motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the detection sensitivity,
and adjust the camera’s ability to detect movement.
You may specify whether the camera should capture a snapshot or a video clip when motion
is detected.
Refer to "Motion Detection" on page 41 for information about how to configure motion
Step 2
This step allows you to enable motion detection based on a customized schedule. Specify the
day and hours. You may also choose to always record whenever motion is detected.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Step 3
This step allows you to specify how you will receive event notifications from your camera. You
may choose not to receive notifications, or to receive notifications via e-mail or FTP.
Please enter the relevant information for your e-mail or FTP account.
Click Next to continue.
Step 4
You have completed the Motion Detection Wizard.
Please verify your settings and click Apply to save them.
Please wait a few moments while the camera saves your settings and restarts.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Network Setup
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any
changes, click the Save Settings button to save your changes.
LAN Settings: This section lets you configure settings for your local
area network.
DHCP: Select this connection if you have a DHCP server running
on your network and would like your camera to obtain
an IP address automatically.
If you choose DHCP, you do not need to fill out the IP
address settings.
Static IP Client: You may obtain a static or fixed IP address and other
network information from your network administrator
for your camera. A static IP address may simplify access
to your camera in the future.
IP Address: Enter the fixed IP address in this field.
Subnet Mask: This number is used to determine if the destination is in
the same subnet. The default value is
Default Gateway: The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
Primary DNS: The primary domain name server translates names to IP
Secondary DNS: The secondary DNS acts as a backup to the primary DNS.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Enable UPnP Presentation: Enabling this setting allows your camera to be configured
as a UPnP device on your network.
Enable UPnP Port Forwarding: Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable PPPoE: Enable this setting if your network uses PPPoE.
User Name / Password: Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
HTTP Port: The default port number is 80.
Access Name for Stream 1~2: The default name is video#.mjpg, where # is the number
of the stream.
HTTPS Port: You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Authentication: Choose to enable or disable RTSP digest encryption.
Digest encryption uses MD5 hashes.
RTSP Port: The port number that you use for RTSP streaming to
mobile devices, such as mobile phones or PDAs. The
default port number is 554. You may specify the address
of a particular stream. For instance, live1.sdp can be
accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x
represents the IP address of your camera.
Enable CoS: Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
D-Link DCS-4602EV User Manual

Section 3: Configuration
Enable QoS: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
Enable IPv6: Enabling this setting will enable use of the IPv6 protocol.
Click the IPv6 Information button to see the camera's
current IPv6 details, or you can check Manually setup
the IP address to manually set up the IP address, specify
a default router, and set the primary DNS.
Enable Multicast for stream: The DCS-4602EV allows you to multicast each of the
available streams via group address and specify the TTL
value for each stream. Enter the port and TTL settings
you wish to use if you do not want to use the defaults.
Enable Bonjour: Enable this to allow other network devices to connect to
this camera using Bonjour.
Bonjour Name: Enter the name to identify this camera on Bonjour.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Dynamic DNS
DDNS allows you to access your camera using a domain name instead of an IP address. To do this, you will need to have an account with one of the
DDNS services listed in the drop-down box on this page.
Enable DDNS: Select this checkbox to enable the DDNS function.

Server Address: Select your Dynamic DNS provider from the pull down
menu or enter the server address manually.
Host Name: Enter the host name of the DDNS server.
User Name: Enter the user name or e-mail used to connect to your
DDNS account.
Password: Enter the password used to connect to your DDNS
server account.
Timeout: Enter the DNS timeout values you wish to use.
Status: Indicates the connection status, which is automatically
determined by the system.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Image Setup
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy Mask: The Privacy Mask setting allows you to specify up to 3
rectangular areas on the camera's image to be blocked/
excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area. Right clicking on the
camera image brings up the following menu options:

ƒ Disable All: Disables all mask areas

ƒ Enable All: Enables all mask areas

ƒ Reset All: Clears all mask areas.
Mirror: This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning Flip on,
you may want to consider turning Mirror on as well.
Anti Flicker: Select the frequency used by your power lines to avoid
interference or distortion.
White Balance: Use the drop-down box to change white balance settings
to help balance colors for different environments. You
can choose from Auto, Outdoor, Indoor, Fluorescent,
and Push Hold.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Exposure Mode: Changes the exposure mode. Use the drop-down
box to set the camera for Indoor, Outdoor, or Night
environments, or to Moving to capture moving objects.
The Low Noise option will focus on creating a high-
quality picture without noise. You can also create 3
different custom exposure modes. The Max Gain setting
will allow you to control the maximum amount of gain
to apply to brighten the picture.
Denoise: This setting controls the amount of noise reduction that
will be applied to the picture.
Brightness: Adjust this setting to compensate for backlit subjects.
Contrast: Adjust this setting to alter the color intensity/strength.
Saturation: This setting controls the amount of coloration, from
grayscale to fully saturated.
Sharpness: Specify a value from 0 to 8 to specify how much
sharpening to apply to the image.
WDR Level: WDR makes it easier to see objects that may appear dark
due to strong backlighting conditions during the daytime.
Higher WDR levels will make it easier to see objects in
3D Filter: 3D filtering reduces the amount of image noise when
viewing a low-light environment. Higher levels of 3D
filtering will apply stronger levels of noise reduction.
Reset Default: Click this button to reset the image to factory default
D-Link DCS-4602EV User Manual

Section 3: Configuration
You may configure up to 3 video profiles with different settings for your camera. Hence, you may set up different profiles for your computer and
mobile display. After making any changes, click the Save Settings button to save your changes.
Aspect ratio: Set the aspect ratio of the video to 4:3 standard or 16:9
Mode: Set the video codec to be used to JPEG, MPEG-4, or
Frame size / View window area: Frame size determines the total capture resolution, and
View window area determines the Live Video viewing
window size. If the Frame size is larger than the Live
Video size, you can use the ePTZ controls to look around.
16:9 1920 x 1080, 1280 x 720, 800 x 448,
640 x 360, 480 x 272, 320 x 176 up to 30 fps
1440 x 1080, 1280 x 960, 900 x 720,
800 x 592, 640 x 480, 480 x 352, 320 x 240
up to 30 fps
Note: If your View window area is the same as your Frame
size, you will not be able to use the ePTZ function.
Maximum frame rate: A higher frame rate provides smoother motion for
videos, and requires more bandwidth. Lower frame
rates will result in stuttering motion, and requires less
D-Link DCS-4602EV User Manual

Section 3: Configuration
Video Quality: This limits the maximum frame rate, which can be
combined with the "Fixed quality" option to optimize
the bandwidth utilization and video quality. If fixed
bandwidth utilization is desired regardless of the video
quality, choose "Constant bit rate" and select the desired
Constant bit rate: The bps will affect the bit rate of the video recorded
by the camera. Higher bit rates result in higher video
Fixed quality: Select the image quality level for the camera to try to
maintain. High quality levels will result in increased bit
D-Link DCS-4602EV User Manual

Section 3: Configuration
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by
using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset
sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set.
Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function.
Video Profile: This selects which video profile to use.
ePTZ Speed: You may select a value between 0 and 10. 0 is the slowest
and 10 is the fastest.
Arrow Buttons and Home Button: Use these buttons to move to a specific part of the
viewing area, which you can then set as a preset. Click
the Home button to return to the center of the viewing
Input Preset Name: Enter the name of the preset you want to create, then
click the Add button to make a new preset. If an existing
preset has been selected from the Preset List, you can
change its name by typing in a new name, then clicking
the Rename button.
Preset List: Click this drop-down box to see a list of all the presets
that have been created. You can select one, then click
the GoTo button to change the displayed camera view
to the preset. Clicking the Remove button will delete
the currently selected preset.
Preset Sequence: This section allows you to create a preset sequence,
which automatically moves the camera's view between
a set of preset views.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Preset List: To add a preset to the sequence, select it from the drop-
down box at the bottom of this window, set the Dwell
time to determine how long the camera view will stay at
that preset, then click the Add button. The preset name
will appear in the list, followed by the dwell time to view
that preset for.
You can rearrange your presets in the sequence by
selecting a preset in the sequence, then clicking the
arrow buttons to move it higher or lower in the current
Clicking the trash can button will remove the currently
selected preset from the sequence.
If you want to change the dwell time for a preset, select
it from the list, enter a new dwell time, then click the
Update button.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether
motion is detected by the camera or not. After making any changes, click the Save Settings button to save your changes.
Enable Video Motion: Select this box to enable the motion detection feature
of your camera.
Sensitivity: Specifies how sensitive motion detection will be from
0% to 100%. A low sensitivity setting means that there
must be large changes between two images in order to
detect motion, and a high sensitivity setting means that
even small changes will cause motion to be detected.
Draw Motion Area: Use your mouse to click and drag on the areas that you
would like to monitor for motion.
Erase Motion Area: To erase a motion detection area, simply click on the red
square that you wish to remove.
Right click on the camera image to bring up the following
menu options:
Select All: Draws a motion detection area over the
entire screen.
Clear All: Clears any motion detection areas that have
been drawn.
Restore: Restores the previously specified motion
detection areas.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Time and Date
This section allows you to automatically or manually configure, update, and maintain the internal system clock for your camera. After making any
changes, click the Save Settings button to save your changes.
Time Zone: Select your time zone from the drop-down menu.
Enable Daylight Saving: Select this to enable Daylight Saving Time.
Auto Daylight Saving: Select this option to allow your camera to configure the
Daylight Saving settings automatically.
Set Date and Time Manually: Selecting this option allows you to configure the Daylight
Saving date and time manually.
Offset: Sets the amount of time to be added or removed when
Daylight Saving is enabled.
Synchronize with NTP Server: Enable this feature to obtain time automatically from an
NTP server.
NTP Server: Network Time Protocol (NTP) synchronizes the
DCS-4602EV with an Internet time server. Choose the
one that is closest to your location.
Set the Date and Time Manually: This option allows you to set the time and date manually.
Copy Your Computer's Time This will synchronize the time information from your PC.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Event Setup
In a typical application, when motion is detected, the DCS-4602EV sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a specified action will be
performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
Event Condition
Motion detection,
Periodically, System reboot
(what to send)
(where to send)
Snapshot, Video Clips
Email, FTP
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-4602EV User Manual

Section 3: Configuration
The Event Setup page includes 4 different sections.
• Event
• Server
• Media
• Recording
1. To add a new item server, media, event, or recording item click Add. A screen will appear
and allow you to update the fields accordingly.
2. To delete the selected item from the server, media, event, or recording drop-down menus,
click the Delete button next to it.
3. Click on an item to edit it.
Add Server
You can configure up to 5 servers to save snapshots and/or video to. After making any
changes, click the Save Settings button to save your changes.
Server Name: Enter the unique name of your server.
E-mail: Enter the configuration for the target e-mail server
FTP: Enter the configuration for the target FTP server account.
Network Storage: Specify a network storage device. Only one network
storage device is supported.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Add Media
There are three types of media: Snapshot, Video Clip, and System Log. After making any
changes, click the Save Settings button to save your changes.
Media Name: Enter a unique name for media type you want to create.
Snapshot: Select this option to set the media type to snapshots.
Source: Set the video profile to use as the media source. Refer
to "Video" on page 37 for more information on video
Send pre-event image(s) [0~3]: Set the number of pre-event images to take. Pre-event
images are images taken before the main event snapshot
is taken.
Send post-event image(s) [0~7]: Set the number of post-event images to take. Post-event
images are images taken after the main event snapshot
is taken. You can set up to 7 post-event images to be
For example:
If both the Send pre-event images and Send
post-event images are set to four, a total of 9
images are generated after a trigger is activated.
1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic.
7 pic. 8 pic. 9 pic.
The moment the
trigger is activated.
D-Link DCS-4602EV User Manual

Section 3: Configuration
File name prefix: The prefix name will be added to the file name.
File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS
Add date and time suffix to file
name: Check this to add the date and time the snapshot was
recorded as a file name suffix.
Video clip: Select this option to set the media type to video clips.
Source: Set the video profile to use as the media source. Refer
to "Video" on page 37 for more information on video
Pre-event recording: profiles.
This sets how many seconds to record before the main
event video clip starts. You can record up to 4 seconds of
Maximum duration: pre-event video.
Set the maximum length of video to record for your
Maximum file size: video clips.
File Name Prefix: Set the maximum file size to record for your video clips.
This is the prefix that will be added to the filename of
System log: saved video clips.
Select this option to set the media type to system logs.
This will save the event to the camera system log, but
will not record any snapshots or video.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Add Event
Create and schedule up to 3 events with their own settings here. After making any changes,
click the Save Settings button to save your changes.
Event name: Enter a name for the event.
Enable this event: Select this box to activate this event.
Priority: Set the priority for this event. The event with higher
priority will be executed first.
Delay: Select the delay time before checking the next event. It
is being used for both events of motion detection and
digital input trigger.
Trigger: Specify the input type that triggers the event.
Video Motion Detection: Motion is detected during live video monitoring. Select
the windows that need to be monitored.
Periodic: The event is triggered in specified intervals. The trigger
interval unit is in minutes.
System Boot: Triggers an event when the system boots up.
Time: Select Always or enter the time interval to monitor for
the specified kind of event.
Action: If you have created Server and Media entries, you will
see them appear here. Select which Server you want to
send to and which Media you want the camera to send.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Add Recording
Here you can configure and schedule the recording settings. After making any changes,
click the Save Settings button to save your changes.
Recording entry name: Enter a name for the recording.
Enable this recording: Select this to enable the recording function.
Priority: Set the priority for this entry. An entry with a higher
priority value will be executed first.
Source: Select the video profile to use as the recording source.
Recording schedule: Use the checkboxes to set which days to record video
on. Select Always to record for the entire day, or select
From and select what period of time you want to record
using the dropdown boxes.
Destination: Select the folder where the recording file will be stored.
Total cycling recording size: Please input a HDD volume between 1MB and 2TB for
recording space. The recording data will replace the
oldest record when the total recording size exceeds this
value. For example, if each recording file is 6MB, and the
total cyclical recording size is 600MB, then the camera
will record 100 files in the specified location (folder) and
then wil delete the oldest file and create new file for
cyclical recording.
Please note that if the free HDD space is not enough, the
recording will stop. Before you set up this option please
make sure your HDD has enough space, and it is better to
not save other files in the same folder as recording files.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Size of each file for recording: If this is selected, files will be separated based on the file
size you specify.
Time of each file for recording: If this is selected, files will be separated based on the
maximum length you specify.
File Name Prefix: The prefix name will be added on the file name of the
recording file(s).
D-Link DCS-4602EV User Manual

Section 3: Configuration
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
Automatic: The Day/Night mode is set automatically. You can use the
Sensitivity drop-down box to set when the camera will
switch to Night mode. The text box to the right shows
what lighting conditions are currently being detected
by the camera for reference. You can refresh this status
by clicking the Refresh button.
Day Mode: Day mode enables the IR Cut Filter.
Night Mode: Night mode disables the IR Cut Filter.
Schedule Mode: Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
IR Light Control: The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specific application.
Off: The IR light will always be off.
On: The IR light will always be on.
Sync with ICR: The IR light will turn on when the ICR filter is disabled
(night mode).
Schedule: The IR light will turn on or off according to the schedule
that you specify below.
D-Link DCS-4602EV User Manual

Section 3: Configuration
This page allows you to install and activate an HTTPS certificate for secure access to your camera. After making any changes, click the Save Settings
button to save your changes.
Enable HTTPS Secure Connection: Enable the HTTPS service.
Create Certificate Method: Choose the way the certificate should be created. Three
options are available:

ƒ Create a self-signed certificate automatically

ƒ Create a self-signed certificate manually

ƒ Create a certificate request and install
Status: Displays the status of the certificate.
Note: The certificate cannot be removed while HTTPS is
still enabled. To remove the certificate, you must first
uncheck Enable HTTPS secure connection.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Access List
Here you can set access permissions for users to view your DCS-4602EV.
Allow list: The list of IP addresses that have access rights to the
Note: When adding entries to the Allow list, make sure
the first entry includes the IP address of the computer or
device you are using to access the camera. Otherwise,
you may be blocked from accessing the camera after
adding the entry to the Allow list.
Start IP address: The starting IP address of the IP address range for the
devices (such as a computer) that have permission to
access the video of the camera.
End IP address: The ending IP address of the IP address range for the devices
(such as a computer) that have permission to access the
video of the camera. Click Add to save your changes.
Note: A total of seven lists can be configured for both
Delete allow list: Select an entry to remove from the Allow List, then click
Deny list: The list of IP addresses that have no access rights to the
Delete deny list: Select an entry to remove from the Deny List, then click
Note: All addresses in the Deny List will be denied access,
even if they are also in the Allow List.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Here you can set the SNMP settings for the camera, which allow for SNMP management of the camera.
Enable SMNPv1, SNMPv2c: Enable this option to allow for SNMPv1 and SNMPv2c
management of the camera.
Read/Write Community: Enter a name for the read/write community of your SNMP
Read Only Community: Enter a name for the read-only community of your SNMP
Enable SNMPv3: Enable this option to allow SNMPv3 management of the
Read/Write Security Name: Enter a name for the read/write community of your read/
write SNMP server.
Authentication Type: Enter the type of authentication used by your read/write
SNMP server.
Authentication Password: Enter the authentication password used for your read/
write SNMP server.
Encryption Password: Enter the encryption password used for your read/write
SNMP server.
Read Only Security Name Enter a name for the read-only community of your read-
only SNMP server.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Authentication Type: Enter the type of authentication used by your read-only
SNMP server.
Authentication Password: Enter the authentication password used for your read-
only SNMP server.
Encryption Password: Enter the encryption password used for your read-only
SNMP server.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Device Management
You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera.
You may also use this section to create a unique name and configure the OSD settings for your camera.
Admin Password Setting: Set a new password for the administrator’s account.
Add User Account: Add a new user account.
User Name: Enter the user name for the new account.
Password: Enter the password for the new account.
User List: All the existing user accounts will be displayed here. You
may delete accounts included in the list, but you may
want to reserve at least one as a guest account.
IP Camera Name: Create a unique name for your camera that will be added
to the file name prefix when creating a snapshot or a
video clip.
Enable OSD: Select this option to enable the On-Screen Display
feature for your camera.
Label: Enter a label for the camera, which will be shown on the
OSD when it is enabled.
Show Time: Select this option to enable the time-stamp display on
the video screen.
LED: You may specify whether or not to illuminate the status
LED on the camera.
D-Link DCS-4602EV User Manual

Section 3: Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard Drive: You may save your current camera configuration as a file
on your computer.
Load From Local Hard Drive: Locate a pre-saved configuration by clicking Browse and
then restore the pre-defined settings to your camera by
clicking Load Configuration.
Restore to Factory Defaults: You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
Reboot Device: This will restart your camera.
Enable Schedule Reboot: If you want your camera to reboot on a regular schedule,
check the Enable Schedule Reboot checkbox, then
select the days and time you want the camera to reboot
D-Link DCS-4602EV User Manual

Section 3: Configuration
Firmware Upgrade
The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available
firmware version.
To upgrade the firmware on your DCS-4602EV, please download and save the latest firmware version from the D-Link Support Page to your local
hard drive. Locate the file on your local hard drive by clicking the Browse button. Select the file and click the Upload button to start upgrading the
Current Firmware Version: Displays the detected firmware version.
Current Product Name: Displays the camera model name.
File Path: Locate the file (upgraded firmware) on your hard drive
by clicking Browse.
Upload: Uploads the new firmware to your camera.
D-Link DCS-4602EV User Manual

Section 3: Configuration
Device Info
This page displays detailed information about your device and network connection.
D-Link DCS-4602EV User Manual

Section 3: Configuration
This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete
the saved log information.
D-Link DCS-4602EV User Manual

Section 3: Configuration
This page provides helpful information regarding camera operation.
D-Link DCS-4602EV User Manual

Appendix A: Technical Specifications
Technical Specifications
Camera Hardware

ƒ 1/3" 2 Megapixel progressive CMOS sensor
ƒ Angle of view:

ƒ 20 meter IR illumination distance
ƒ (H) 96°

ƒ Minimum illumination: 0 lux with IR LED on
ƒ (V) 54°

ƒ Built-in Infrared-Cut Removable (ICR) Filter module
ƒ (D) 108°

ƒ 10x digital zoom
ƒ Adjustment angle (non-motorized):

ƒ Minimum object distance 0.2M
ƒ Vertical: 60°

ƒ Focal length: 2.8 mm
ƒ Horizontal: 350°

ƒ Aperture: F1.8
Camera Housing

ƒ IP-66 compliant weatherproof housing
IK10 vandal-proof housing
Image Features

ƒ Configurable image size, quality, frame rate, and bit rate

ƒ Configurable privacy mask zones

ƒ Time stamp and text overlays

ƒ Configurable shutter speed, brightness, saturation, contrast,

ƒ Configurable motion detection windows
sharpness, WDR, and 3D filter
Video Compression

ƒ Simultaneous H.264/MJPEG format compression

ƒ JPEG for still images

ƒ H.264/MJPEG multicast streaming
Video Resolution
16:9 - 1920 x 1080, 1280 x 720, 800 x 448, 640 x 360, 480 x 272,
4:3 - 1440 x 1080, 1280 x 960, 900 x 720, 800 x 592, 640 x 480, 480
320 x 176 up to 30 fps
x 352, 320 x 240 up to 30 fps
External Device

ƒ 10/100 BASE-TX Fast Ethernet port

ƒ Supports 802.3af PoE
Network Protocols

ƒ IPv6


ƒ IPv4

ƒ Samba client




ƒ UPnP port forwarding




ƒ IP filtering

ƒ DHCP client

ƒ Multicast

ƒ NTP client (D-Link)

ƒ CoS

ƒ DNS client


ƒ DDNS client (D-Link)


ƒ SMTP client

ƒ ONVIF compliant

ƒ FTP client
Administrator and user group protection
HTTP and RTSP authentication
Password authentication
D-Link DCS-4602EV User Manual

Appendix A: Technical Specifications
Management Requirements for

ƒ Browser: Internet Explorer, Firefox, Safari
Web Interface
Event Management

ƒ Motion detection

ƒ Supports multiple SMTP and FTP servers

ƒ Event notification and uploading of snapshots/video clips via

ƒ Multiple event notifications
e-mail or FTP

ƒ Multiple recording methods for easy backup

ƒ Take snapshots/video clips and save to local hard drive

ƒ Configuration interface accessible via web browser
D-ViewCam™ System
ƒ Operating System: Microsoft Windows 8/7/Vista

ƒ Protocol: Standard TCP/IP

ƒ Web Browser: Internet Explorer 7 or higher

ƒ Remote management/control of up to 32 cameras

ƒ Supports all management functions provided in web interface
Software Functions

ƒ Viewing of up to 32 cameras on one screen

ƒ Scheduled motion triggered, or manual recording options
525 g ± 5%
External Power
Adapter (not
Input: 100 to 240 V AC, 50/60 Hz
Output: 12 V DC 1.5 A
Power Consumption 5.5 watts ± 5%
Operating: -30 to 50 °C (-22 to 122 °F)
Storage: -20° to 70° C (-4° to 158° F)
Operating: 20% to 80% non-condensing
Storage: 5% to 95% non-condensing
D-Link DCS-4602EV User Manual

Appendix A: Technical Specifications
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Regulatory Information
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Industry Canada Statement:
This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Union
CE EMI Class A Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage.
Remember to consult the product user instructions for more details.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal)
before touching the product.
• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read
and follow the instructions in the user manual.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application.
• Keep the product away from radiators and other heat sources.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.
Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts.
Weitere Details finden Sie in den Benutzeranleitungen zum Produkt.
• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Aufladung zu vermeiden, leiten Sie
elektrostatische Ladungen von Ihrem Körper ab,
(z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.
• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit
austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.
• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder
-öffnungen Ihres Produkts.
• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation,
es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.
• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.
• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels
dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails.
• L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet
en métal relié à la terre par exemple) avant de toucher le produit.
• N’essayez pas d’intervenir sur le produit et ne le démontez jamais. Pour certains produits contenant une batterie remplaçable par l’utilisateur,
veuillez lire et suivre les consignes contenues dans le manuel d’utilisation.
• Ne renversez pas d’aliments ou de liquide sur le produit et n’insérez jamais d’objets dans les orifices.
• N’utilisez pas ce produit à proximité d’un point d’eau, de zones très humides ou de condensation sauf si le produit a été spécifiquement
conçu pour une application extérieure.
• Éloignez le produit des radiateurs et autres sources de chaleur.
• Débranchez toujours le produit de l’alimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux.
Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto
frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.
• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej.,
tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.
• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario,
lea y siga las instrucciones del manual de usuario.
• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.
• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasificado
específicamente para aplicación en exteriores.
• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.
• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa.
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da
potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto.
• L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte
metallica collegata a terra) prima di toccare il prodotto.
• Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dall’utente, leggere e seguire le
istruzioni riportate nel manuale dell’utente.
• Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto.
• Non usare questo prodotto vicino all’acqua, in aree con elevato grado di umidità o soggette a condensa a meno che il prodotto non sia
specificatamente approvato per uso in ambienti esterni.
• Tenere il prodotto lontano da caloriferi e altre fonti di calore.
• Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce.
De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen
tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie.
• Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het
aanraken van geaard bloot metaal) voordat uhet product aanraakt.
• U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de
gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen.
• Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen.
• Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is
voor gebruik buitenshuis.
• Houd het product uit de buurt van radiators en andere warmtebronnen.
• U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek.
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Disposing and Recycling Your Product

This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to
conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpflichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende Informationen im Internet
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le
Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al fin de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid
met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft
bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige
autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te
recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt
en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás
csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-
tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a weboldalon tudhat meg.
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som
husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta
D-Link DCS-4602EV User Manual

Appendix B: Regulatory Information
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite
D-Link DCS-4602EV User Manual

Document Outline