Version 1.00 | 08/19/2015
User Manual
Vigilance Full HD Outdoor PoE Mini Dome Camera

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and
Manual Revisions
DCS-4802E Revision A1 with firmware version 1.00
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2015 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
D-Link DCS-4802E User Manual

Table of Contents
Product Overview ........................................................4
Advanced ...............................................................................45
Package Contents ................................................................. 4
ICR and IR ...........................................................................45
Introduction ............................................................................ 5
HTTPS ..................................................................................46
System Requirements ......................................................... 5
Access List ..........................................................................47
Features .................................................................................... 6
SNMP ...................................................................................48
Hardware Overview ............................................................. 7
Maintenance .........................................................................50
Connecting the Camera ..................................................... 8
Device Management .....................................................50
Mounting the Camera ......................................................... 9
System ................................................................................51
Waterproofing Your Installation ................................11
Firmware Upgrade ..........................................................52
Software Installation ......................................................14
Status ......................................................................................53
Configuration ............................................................17
Device Info ........................................................................53
Using the Configuration Interface ................................17
Logs .....................................................................................54
Live Video ..............................................................................19
Setup .......................................................................................21
Technical Specifications ............................................56
Setup Wizard ....................................................................21
Regulatory Information ............................................59
Network Setup .................................................................26
Dynamic DNS ...................................................................29
Image Setup .....................................................................30
Video ...................................................................................32
Preset ...................................................................................34
Motion Detection ...........................................................36
Time and Date ..................................................................37
Event Setup .......................................................................38
D-Link DCS-4802E User Manual

Section 1: Product Overview
Product Overview
Package Contents
DCS-4802E Vigilance Full HD Outdoor PoE Mini Dome Camera
Cable Waterproofing Connector
Rubber Power Connector Plug
Mounting Kit
CD-ROM with User Manual and software
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Safety Notice: Installation and servicing should be done by certified technicians so as
to conform to all local codes and prevent voiding your warranty.
D-Link DCS-4802E User Manual

Section 1: Product Overview
Congratulations on your purchase of the DCS-4802E Vigilance Full HD Outdoor PoE Mini Dome Camera. The DCS-4802E is a
professional surveillance and security solution for small, medium, and large enterprises alike. The DCS-4802E uses a Full HD
progressive scan CMOS sensor; the professional sensor results in low noise and high sensitivity capabilities ideal for surveillance
The DCS-4802E is a complete system with a built-in CPU and incorporates a web server, allowing it to transmit excellent real-
time Full HD resolution video for security and outdoor surveillance.
The DCS-4802E can be accessed remotely, controlled and configured from any PC/Notebook over your local network or through
the Internet via a web browser. The simple installation and intuitive web-based interface offer easy configuration across the
full range of its advanced feature set, including granular control over multiple video streams with different configurations and
multicast video streams which helps you manage your network load.
The DCS-4802E has an IP66 certified weatherproof housing designed for both indoor and outdoor applications. The built-in
removable IR-cut filter and IR LEDs give the DCS-4802E the capability to view up to 20M at night. The DCS-4802E also incorporates
Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power
cabling. The combination of IP66 weatherproof housing, IR-Cut Filter, IR LEDs, and PoE make the DCS-4802E an ideal solution
for a dependable and cost-effective 24 hour surveillance solution with easy clutter-free installation.
System Requirements
• Computer with Microsoft Windows® 8, 7, or Vista® (for CD-ROM Setup Wizard), Mac OS, or Linux
• Internet Explorer 7, Firefox 20, or Safari 6 or higher
• Existing 10/100 Ethernet-based network with an available 802.3af Power over Ethernet (PoE) port
D-Link DCS-4802E User Manual

Section 1: Product Overview
Simple to Maintain
The DCS-4802E is a stand-alone system with a built-in CPU, requiring no special hardware or software. The DCS-4802E can be viewed and managed
through most web browsers, including Internet Explorer®, Firefox®, and Safari®.
Supports a Variety of Platforms
With support for TCP/IP networking, HTTP, and other Internet related protocols, the DCS-4802E can also be integrated easily into other Internet/
Intranet applications because of its standards-based features. The DCS-4802E works with any 10/100 Ethernet network, making the DCS-4802E
easy to integrate into your existing network environment.
Advanced Event Management
The DCS-4802E can be set up to send e-mail notifications with snapshots when an event occurs, such as when motion is detected. Events can be
triggered from several sources, such as motion detection and time based events.
IR LEDs for Day and Night Functionality
The built-in infrared LEDs enable night time viewing of up to 20 meters.
IP66 Weatherproof Housing
The DCS-4802E uses an IP66 weatherproof housing, allowing you to rest assured that in the toughest of conditions, it will continue to provide
round-the-clock surveillance.
PoE (Power over Ethernet) for Flexible Installation
The DCS-4802E can draw all the power it needs from a PoE switch or PoE injector for a simple and clutter-free installation.
Remote Monitoring Utility
The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to configure and access
the Network Camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing
up to 32 cameras on one screen, and taking snapshots.
D-Link DCS-4802E User Manual

Section 1: Product Overview
Hardware Overview
Light Sensor
Detects lighting conditions
Camera Lens
Fixed lens to record video of the surrounding area
Provide illumination for low-light environments
Camera Base Cover
Covers the mounting holes on the camera base
Reset Button
Press and hold for 10 seconds to reset camera back to the factory default settings
Power Connector
Connects to an optional 12 V, 1.5 A power adapter (not included)
Ethernet Jack
RJ-45 connector for Ethernet which can also be used to power the camera using
Power over Ethernet (PoE)
D-Link DCS-4802E User Manual

Section 2: Installation
Connecting the Camera
You can power the DCS-4802E two different ways: through PoE or through a power adapter.
Powering the camera through PoE (Class 2):
Connect an Ethernet cable to the LAN(PoE) port on the camera. Connect the
other end of the cable to your PoE switch or PoE injector.
Powering the camera through a power adapter (not included):
Connect a 12 V, 1.5 A power adapter to the power connector.
Connect an Ethernet cable to the LAN(PoE) port on the camera. Connect the
other end of the cable to your network.
D-Link DCS-4802E User Manual

Section 2: Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then
insert the wall anchors into the holes.
If you are running the camera cables through the wall or ceiling, drill a hole
in the center and pull the cables through the hole.
Step 2
Use the screws provided to mount the camera to the wall.
If you are running the camera cables out the side of the camera, guide the
camera cables through the cable channel on the base.
D-Link DCS-4802E User Manual

Section 2: Installation
Step 3
Attach the camera base cover by lining up the cable channel on it with the mark
on the camera base, then turn the camera base cover clockwise until it clicks.
D-Link DCS-4802E User Manual

Section 2: Installation
Waterproofing Your Installation
To waterproof your camera installation, follow the instructions below. Round Ethernet cable, a crimping tool, and RJ-45 plugs
are required for this procedure.
Step 1
Place the washer around the base of the Ethernet connector as shown.
Step 2
Thread bare Ethernet cable through the waterproof connector as shown, then
crimp an RJ-45 plug onto the cable.
D-Link DCS-4802E User Manual

Section 2: Installation
Step 3
Connect the RJ-45 plug into the Ethernet connector, then screw the waterproof
connector to the Ethernet connector by turning it about a half-turn clockwise.
Step 4
Screw the back part of the waterproof connector clockwise until there is a tight
seal around the Ethernet cable.
If you are using PoE to power your camera, use the included rubber power
connector plug to the power connector.
D-Link DCS-4802E User Manual

Section 2: Installation
If you are using a power adapter (not included) to power your camera, wind
waterproof tape around the connection in an overlapping manner to cover it.
D-Link DCS-4802E User Manual

Section 2: Installation
Software Installation
Step 1
Insert the DCS-4802E CD into your computer's CD-ROM drive to begin the
If the Autorun function on your computer is disabled, or if the D-Link Launcher
fails to start automatically, click the Start button and type D:\autorun.exe (where
D: represents the drive letter of your CD-ROM drive) and press Enter.
Step 2
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start
menu (Start > D-Link > Setup Wizard SE).
D-Link DCS-4802E User Manual

Section 2: Installation
Step 3
The Setup Wizard will appear and display the MAC address and IP address of your
camera(s). If you have a DHCP server on your network, a valid IP Address will be
displayed. If your network does not use a DHCP server, the network camera's
default static IP will be displayed.
Select your camera, then click the Wizard button to continue.
Step 4
Enter the Admin ID and password. When logging in for the first time, the default
Admin ID is admin with the password left blank.
Click the checkboxes if you wish to change the admin ID and password for the
camera, and enter the new ID and password you wish to use.
Click Next to continue.
D-Link DCS-4802E User Manual

Section 2: Installation
Step 5
Select DHCP if your camera obtains an IP address automatically from a DHCP
server such as a router. Select Static IP if you want to manually enter the IP
settings for the camera.
Click Next to continue.
Step 6
Take a moment to confirm your settings and click Restart.
D-Link DCS-4802E User Manual

Section 3: Configuration
Using the Configuration Interface
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration
utility is designed to allow you to easily access and configure your DCS-4802E. At the end of the wizard, click Link, or enter
the IP address of your camera into a web browser, such as Firefox. To log in, use the User name admin and the password you
created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password,
click OK.
Step 1
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start
menu (Start > D-Link > Setup Wizard SE).
Step 2
Select the camera and click Link to access the web configuration.
The Setup Wizard will automatically open your web browser to the IP address of
the camera.
D-Link DCS-4802E User Manual

Section 3: Configuration
Step 3
Enter admin as the default username and leave the password blank. Click OK to
Step 4
This section displays your camera’s live video. You can select your video profile
and view or operate the camera.
D-Link DCS-4802E User Manual

Section 3: Configuration
Live Video
This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your
language using the drop-down menu on the left side of the screen.
You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.
Motion Trigger
This indicator will change color when a trigger event occurs.
Note: The video motion feature for your camera must be
When a recording is in progress, this indicator will change
This control pad can be used to electronically pan, tilt, and
Control Pad
zoom (ePTZ) within the camera's predefined view area, if one
has been defined.
Auto Pan
Starts the automatic panning function. The ROI will pan from
back and forth within the FOV.
Stops the camera ePTZ motion.
Preset Path
Starts the camera's motion along the predefined path.
D-Link DCS-4802E User Manual

Section 3: Configuration
ePTZ Speed: You may select a value between 0 and 10. 0 is the slowest and 10 is the
Global View: This window indicates the total field of view (FOV) of the camera. The
red box indicates the visible region of interest (ROI).
Language: You may select the interface language using this menu.
Video Profile 1
Record a Video Clip
Video Profile 2
Set a Storage Folder
Full screen mode
Take a Snapshot
Go To: If any presets have been defined, you can select them here to move the
(Preset List) camera to the selected preset.
D-Link DCS-4802E User Manual

Section 3: Configuration
Setup Wizard
To configure your Network Camera, click Internet Connection Setup Wizard. Alternatively,
you may click Manual Internet Connection Setup to manually configure your Network
Camera and skip to "Network Setup" on page 26.
To quickly configure your Network Camera’s motion detection settings, click Motion
Detection Setup Wizard. If you want to enter your settings without running the wizard, click
Manual Motion Detection Setup and skip to"Motion Detection" on page 36.
D-Link DCS-4802E User Manual

Section 3: Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the internet. Click Next to continue.
Select how the camera will connect to the Internet.
If your camera is connected to a router, or you are unsure how your camera will
connect to the Internet, select DHCP Connection.
Select Static IP if your Internet Service Provider has provided you with connection settings, or
if you wish to set a static address within your home network. Enter the correct configuration
information and click Next to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name and password.
Click Next to continue.
D-Link DCS-4802E User Manual

Section 3: Configuration
If you have a Dynamic DNS account and would like the camera to update your IP address
automatically, Select Enable DDNS and enter your host information. Click Next to continue.
Enter a name for your camera and click Next to continue.
Configure the correct time to ensure that all events will be triggered as scheduled. Click Next
to continue.
If you have selected DHCP, you will see a summary of your settings, including the camera's IP
address. Please write down all of this information as you will need it in order to access your
Click Apply to save your settings.
D-Link DCS-4802E User Manual

Section 3: Configuration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to configure your camera's
motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the detection sensitivity,
and adjust the camera’s ability to detect movement.
You may specify whether the camera should capture a snapshot or a video clip when motion
is detected.
Refer to "Motion Detection" on page 36 for information about how to configure motion
Step 2
This step allows you to enable motion detection based on a customized schedule. Specify the
day and hours. You may also choose to always record whenever motion is detected.
D-Link DCS-4802E User Manual

Section 3: Configuration
Step 3
This step allows you to specify how you will receive event notifications from your camera. You
may choose not to receive notifications, or to receive notifications via e-mail or FTP.
Please enter the relevant information for your e-mail or FTP account.
Click Next to continue.
Step 4
You have completed the Motion Detection Wizard.
Please verify your settings and click Apply to save them.
Please wait a few moments while the camera saves your settings and restarts.
D-Link DCS-4802E User Manual

Section 3: Configuration
Network Setup
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any
changes, click the Save Settings button to save your changes.
LAN Settings: This section lets you configure settings for your local
area network.
DHCP: Select this connection if you have a DHCP server running
on your network and would like your camera to obtain
an IP address automatically.
If you choose DHCP, you do not need to fill out the IP
address settings.
Static IP Client: You may obtain a static or fixed IP address and other
network information from your network administrator
for your camera. A static IP address may simplify access
to your camera in the future.
IP Address: Enter the fixed IP address in this field.
Subnet Mask: This number is used to determine if the destination is in
the same subnet. The default value is
Default Gateway: The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
Primary DNS: The primary domain name server translates names to IP
Secondary DNS: The secondary DNS acts as a backup to the primary DNS.
D-Link DCS-4802E User Manual

Section 3: Configuration
Enable UPnP Presentation: Enabling this setting allows your camera to be configured
as a UPnP device on your network.
Enable UPnP Port Forwarding: Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable PPPoE: Enable this setting if your network uses PPPoE.
User Name / Password: Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
HTTP Port: The default port number is 80.
Access Name for Stream 1~2: The default name is video#.mjpg, where # is the number
of the stream.
HTTPS Port: You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Authentication: Choose to enable or disable RTSP digest encryption.
Digest encryption uses MD5 hashes.
RTSP Port: The port number that you use for RTSP streaming to
mobile devices, such as mobile phones or PDAs. The
default port number is 554. You may specify the address
of a particular stream. For instance, live1.sdp can be
accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x
represents the IP address of your camera.
Enable CoS: Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
D-Link DCS-4802E User Manual

Section 3: Configuration
Enable QoS: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
Enable IPv6: Enabling this setting will enable use of the IPv6 protocol.
Click the IPv6 Information button to see the camera's
current IPv6 details, or you can check Manually setup
the IP address to manually set up the IP address, specify
a default router, and set the primary DNS.
Enable Multicast for stream: The DCS-4802E allows you to multicast each of the
available streams via group address and specify the TTL
value for each stream. Enter the port and TTL settings
you wish to use if you do not want to use the defaults.
Enable Bonjour: Enable this to allow other network devices to connect to
this camera using Bonjour.
Bonjour Name: Enter the name to identify this camera on Bonjour.
D-Link DCS-4802E User Manual

Section 3: Configuration
Dynamic DNS
DDNS allows you to access your camera using a domain name instead of an IP address. To do this, you will need to have an account with one of the
DDNS services listed in the drop-down box on this page.
Enable DDNS: Select this checkbox to enable the DDNS function.

Server Address: Select your Dynamic DNS provider from the pull down
menu or enter the server address manually.
Host Name: Enter the host name of the DDNS server.
User Name: Enter the user name or e-mail used to connect to your
DDNS account.
Password: Enter the password used to connect to your DDNS
server account.
Timeout: Enter the DNS timeout values you wish to use.
Status: Indicates the connection status, which is automatically
determined by the system.
D-Link DCS-4802E User Manual

Section 3: Configuration
Image Setup
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy Mask: The Privacy Mask setting allows you to specify up to 3
rectangular areas on the camera's image to be blocked/
excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area. Right clicking on the
camera image brings up the following menu options:

ƒ Disable All: Disables all mask areas

ƒ Enable All: Enables all mask areas

ƒ Reset All: Clears all mask areas.
Mirror: This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning Flip on,
you may want to consider turning Mirror on as well.
Anti Flicker: Select the frequency used by your power lines to avoid
interference or distortion.
White Balance: Use the drop-down box to change white balance settings
to help balance colors for different environments. You
can choose from Auto, Outdoor, Indoor, Fluorescent,
and Push Hold.
D-Link DCS-4802E User Manual

Section 3: Configuration
Exposure Mode: Changes the exposure mode. Use the drop-down
box to set the camera for Indoor, Outdoor, or Night
environments, or to Moving to capture moving objects.
The Low Noise option will focus on creating a high-
quality picture with reduced noise when monitoring
low-light environments. You can also create 3 different
custom exposure modes. The Max Gain setting will allow
you to control the maximum amount of gain to apply to
brighten the picture.
Denoise: This setting controls the amount of noise reduction that
will be applied to the picture.
Brightness: Adjust this setting to compensate for backlit subjects.
Contrast: Adjust this setting to alter the color intensity/strength.
Saturation: This setting controls the amount of coloration, from
grayscale to fully saturated.
Sharpness: Specify a value from 0 to 8 to specify how much
sharpening to apply to the image.
WDR Level: WDR makes it easier to see objects that may appear dark
due to strong backlighting conditions during the daytime.
Higher WDR levels will make it easier to see objects in
3D Filter: 3D filtering reduces the amount of image noise when
viewing a low-light environment. Higher levels of 3D
filtering will apply stronger levels of noise reduction.
Reset Default: Click this button to reset the image to factory default
D-Link DCS-4802E User Manual

Section 3: Configuration
You may configure up to 3 video profiles with different settings for your camera. Hence, you may set up different profiles for your computer and
mobile display. After making any changes, click the Save Settings button to save your changes.
Aspect ratio: Set the aspect ratio of the video to 4:3 standard or 16:9
Mode: Set the video codec to be used to JPEG, MPEG-4, or
Frame size / View window area: Frame size determines the total capture resolution, and
View window area determines the Live Video viewing
window size. If the Frame size is larger than the Live
Video size, you can use the ePTZ controls to look around.
16:9 1920 x 1080, 1280 x 720, 800 x 448,
640 x 360, 480 x 272, 320 x 176 up to 30 fps
1440 x 1080, 1280 x 960, 900 x 720,
800 x 592, 640 x 480, 480 x 352, 320 x 240
up to 30 fps
Note: If your View window area is the same as your Frame
size, you will not be able to use the ePTZ function.
Maximum frame rate: A higher frame rate provides smoother motion for
videos, and requires more bandwidth. Lower frame
rates will result in stuttering motion, and requires less
D-Link DCS-4802E User Manual

Section 3: Configuration
Video Quality: This limits the maximum frame rate, which can be
combined with the "Fixed quality" option to optimize
the bandwidth utilization and video quality. If fixed
bandwidth utilization is desired regardless of the video
quality, choose "Constant bit rate" and select the desired
Constant bit rate: The bps will affect the bit rate of the video recorded
by the camera. Higher bit rates result in higher video
Fixed quality: Select the image quality level for the camera to try to
maintain. High quality levels will result in increased bit
D-Link DCS-4802E User Manual

Section 3: Configuration
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by
using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset
sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set.
Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function.
Video Profile: This selects which video profile to use.
ePTZ Speed: You may select a value between 0 and 10. 0 is the slowest
and 10 is the fastest.
Arrow Buttons and Home Button: Use these buttons to move to a specific part of the
viewing area, which you can then set as a preset. Click
the Home button to return to the center of the viewing
Input Preset Name: Enter the name of the preset you want to create, then
click the Add button to make a new preset. If an existing
preset has been selected from the Preset List, you can
change its name by typing in a new name, then clicking
the Rename button.
Preset List: Click this drop-down box to see a list of all the presets
that have been created. You can select one, then click
the GoTo button to change the displayed camera view
to the preset. Clicking the Remove button will delete
the currently selected preset.
Preset Sequence: This section allows you to create a preset sequence,
which automatically moves the camera's view between
a set of preset views.
D-Link DCS-4802E User Manual

Section 3: Configuration
Preset List: To add a preset to the sequence, select it from the drop-
down box at the bottom of this window, set the Dwell
time to determine how long the camera view will stay at
that preset, then click the Add button. The preset name
will appear in the list, followed by the dwell time to view
that preset for.
You can rearrange your presets in the sequence by
selecting a preset in the sequence, then clicking the
arrow buttons to move it higher or lower in the current
Clicking the trash can button will remove the currently
selected preset from the sequence.
If you want to change the dwell time for a preset, select
it from the list, enter a new dwell time, then click the
Update button.
D-Link DCS-4802E User Manual

Section 3: Configuration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether
motion is detected by the camera or not. After making any changes, click the Save Settings button to save your changes.
Enable Video Motion: Select this box to enable the motion detection feature
of your camera.
Sensitivity: Specifies how sensitive motion detection will be from
0% to 100%. A low sensitivity setting means that there
must be large changes between two images in order to
detect motion, and a high sensitivity setting means that
even small changes will cause motion to be detected.
Draw Motion Area: Use your mouse to click and drag on the areas that you
would like to monitor for motion.
Erase Motion Area: To erase a motion detection area, simply click on the red
square that you wish to remove.
Right click on the camera image to bring up the following
menu options:
Select All: Draws a motion detection area over the
entire screen.
Clear All: Clears any motion detection areas that have
been drawn.
Restore: Restores the previously specified motion
detection areas.
D-Link DCS-4802E User Manual

Section 3: Configuration
Time and Date
This section allows you to automatically or manually configure, update, and maintain the internal system clock for your camera. After making any
changes, click the Save Settings button to save your changes.
Time Zone: Select your time zone from the drop-down menu.
Enable Daylight Saving: Select this to enable Daylight Saving Time.
Auto Daylight Saving: Select this option to allow your camera to configure the
Daylight Saving settings automatically.
Set Date and Time Manually: Selecting this option allows you to configure the Daylight
Saving date and time manually.
Offset: Sets the amount of time to be added or removed when
Daylight Saving is enabled.
Synchronize with NTP Server: Enable this feature to obtain time automatically from an
NTP server.
NTP Server: Network Time Protocol (NTP) synchronizes the
DCS-4802E with an Internet time server. Choose the one
that is closest to your location.
Set the Date and Time Manually: This option allows you to set the time and date manually.
Copy Your Computer's Time This will synchronize the time information from your PC.
D-Link DCS-4802E User Manual

Section 3: Configuration
Event Setup
In a typical application, when motion is detected, the DCS-4802E sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a specified action will be
performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
Event Condition
Motion detection,
Periodically, System reboot
(what to send)
(where to send)
Snapshot, Video Clips
Email, FTP
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-4802E User Manual

Section 3: Configuration
The Event Setup page includes 4 different sections.
• Event
• Server
• Media
• Recording
1. To add a new item server, media, event, or recording item click Add. A screen will appear
and allow you to update the fields accordingly.
2. To delete the selected item from the server, media, event, or recording drop-down menus,
click the Delete button next to it.
3. Click on an item to edit it.
Add Server
You can configure up to 5 servers to save snapshots and/or video to. After making any
changes, click the Save Settings button to save your changes.
Server Name: Enter the unique name of your server.
E-mail: Enter the configuration for the target e-mail server
FTP: Enter the configuration for the target FTP server account.
Network Storage: Specify a network storage device. Only one network
storage device is supported.
D-Link DCS-4802E User Manual

Section 3: Configuration
Add Media
There are three types of media: Snapshot, Video Clip, and System Log. After making any
changes, click the Save Settings button to save your changes.
Media Name: Enter a unique name for media type you want to create.
Snapshot: Select this option to set the media type to snapshots.
Source: Set the video profile to use as the media source. Refer to
"Video" on page 32 for more information on video profiles.
Send pre-event image(s) [0~3]: Set the number of pre-event images to take. Pre-event
images are images taken before the main event snapshot
is taken.
Send post-event image(s) [0~7]: Set the number of post-event images to take. Post-event
images are images taken after the main event snapshot
is taken. You can set up to 7 post-event images to be
For example:
If both the Send pre-event images and Send
post-event images are set to four, a total of 9
images are generated after a trigger is activated.
1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic.
7 pic. 8 pic. 9 pic.
The moment the
trigger is activated.
D-Link DCS-4802E User Manual

Section 3: Configuration
File name prefix: The prefix name will be added to the file name.
File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS
Add date and time suffix to file Check this to add the date and time the snapshot was
name: recorded as a file name suffix.
Video clip: Select this option to set the media type to video clips.
Source: Set the video profile to use as the media source. Refer to
"Video" on page 32 for more information on video profiles.
Pre-event recording: This sets how many seconds to record before the main
event video clip starts. You can record up to 4 seconds of
pre-event video.
Maximum duration: Set the maximum length of video to record for your
video clips.
Maximum file size: Set the maximum file size to record for your video clips.
File Name Prefix: This is the prefix that will be added to the filename of
saved video clips.
System log: Select this option to set the media type to system logs.
This will save the event to the camera system log, but
will not record any snapshots or video.
D-Link DCS-4802E User Manual

Section 3: Configuration
Add Event
Create and schedule up to 3 events with their own settings here. After making any changes,
click the Save Settings button to save your changes.
Event name: Enter a name for the event.
Enable this event: Select this box to activate this event.
Priority: Set the priority for this event. The event with higher
priority will be executed first.
Delay: Select the delay time before checking the next event. It
is being used for both events of motion detection and
digital input trigger.
Trigger: Specify the input type that triggers the event.
Video Motion Detection: Motion is detected during live video monitoring. Select
the windows that need to be monitored.
Periodic: The event is triggered in specified intervals. The trigger
interval unit is in minutes.
System Boot: Triggers an event when the system boots up.
Time: Select Always or enter the time interval to monitor for
the specified kind of event.
Action: If you have created Server and Media entries, you will
see them appear here. Select which Server you want to
send to and which Media you want the camera to send.
D-Link DCS-4802E User Manual

Section 3: Configuration
Add Recording
Here you can configure and schedule the recording settings. After making any changes,
click the Save Settings button to save your changes.
Recording entry name: Enter a name for the recording.
Enable this recording: Select this to enable the recording function.
Priority: Set the priority for this entry. An entry with a higher
priority value will be executed first.
Source: Select the video profile to use as the recording source.
Recording schedule: Use the checkboxes to set which days to record video
on. Select Always to record for the entire day, or select
From and select what period of time you want to record
using the dropdown boxes.
Destination: Select the folder where the recording file will be stored.
Total cycling recording size: Please input a HDD volume between 1MB and 2TB for
recording space. The recording data will replace the
oldest record when the total recording size exceeds this
value. For example, if each recording file is 6MB, and the
total cyclical recording size is 600MB, then the camera
will record 100 files in the specified location (folder) and
then wil delete the oldest file and create new file for
cyclical recording.
Please note that if the free HDD space is not enough, the
recording will stop. Before you set up this option please
make sure your HDD has enough space, and it is better to
not save other files in the same folder as recording files.
D-Link DCS-4802E User Manual

Section 3: Configuration
Size of each file for recording: If this is selected, files will be separated based on the file
size you specify.
Time of each file for recording: If this is selected, files will be separated based on the
maximum length you specify.
File Name Prefix: The prefix name will be added on the file name of the
recording file(s).
D-Link DCS-4802E User Manual

Section 3: Configuration
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
Automatic: The Day/Night mode is set automatically. You can use the
Sensitivity drop-down box to set when the camera will
switch to Night mode. The text box to the right shows
what lighting conditions are currently being detected
by the camera for reference. You can refresh this status
by clicking the Refresh button.
Day Mode: Day mode enables the IR Cut Filter.
Night Mode: Night mode disables the IR Cut Filter.
Schedule Mode: Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
IR Light Control: The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specific application.
Off: The IR light will always be off.
On: The IR light will always be on.
Sync with ICR: The IR light will turn on when the ICR filter is disabled
(night mode).
Schedule: The IR light will turn on or off according to the schedule
that you specify below.
D-Link DCS-4802E User Manual

Section 3: Configuration
This page allows you to install and activate an HTTPS certificate for secure access to your camera. After making any changes, click the Save Settings
button to save your changes.
Enable HTTPS Secure Connection: Enable the HTTPS service.
Create Certificate Method: Choose the way the certificate should be created. Three
options are available:

ƒ Create a self-signed certificate automatically

ƒ Create a self-signed certificate manually

ƒ Create a certificate request and install
Status: Displays the status of the certificate.
Note: The certificate cannot be removed while HTTPS is
still enabled. To remove the certificate, you must first
uncheck Enable HTTPS secure connection.
D-Link DCS-4802E User Manual

Section 3: Configuration
Access List
Here you can set access permissions for users to view your DCS-4802E.
Allow list: The list of IP addresses that have access rights to the
Note: When adding entries to the Allow list, make sure
the first entry includes the IP address of the computer or
device you are using to access the camera. Otherwise,
you may be blocked from accessing the camera after
adding the entry to the Allow list.
Start IP address: The starting IP address of the IP address range for the
devices (such as a computer) that have permission to
access the video of the camera.
End IP address: The ending IP address of the IP address range for the devices
(such as a computer) that have permission to access the
video of the camera. Click Add to save your changes.
Note: A total of seven lists can be configured for both
Delete allow list: Select an entry to remove from the Allow List, then click
Deny list: The list of IP addresses that have no access rights to the
Delete deny list: Select an entry to remove from the Deny List, then click
Note: All addresses in the Deny List will be denied access,
even if they are also in the Allow List.
D-Link DCS-4802E User Manual

Section 3: Configuration
Here you can set the SNMP settings for the camera, which allow for SNMP management of the camera.
Enable SMNPv1, SNMPv2c: Enable this option to allow for SNMPv1 and SNMPv2c
management of the camera.
Read/Write Community: Enter a name for the read/write community of your SNMP
Read Only Community: Enter a name for the read-only community of your SNMP
Enable SNMPv3: Enable this option to allow SNMPv3 management of the
Read/Write Security Name: Enter a name for the read/write community of your read/
write SNMP server.
Authentication Type: Enter the type of authentication used by your read/write
SNMP server.
Authentication Password: Enter the authentication password used for your read/
write SNMP server.
Encryption Password: Enter the encryption password used for your read/write
SNMP server.
Read Only Security Name Enter a name for the read-only community of your read-
only SNMP server.
D-Link DCS-4802E User Manual

Section 3: Configuration
Authentication Type: Enter the type of authentication used by your read-only
SNMP server.
Authentication Password: Enter the authentication password used for your read-
only SNMP server.
Encryption Password: Enter the encryption password used for your read-only
SNMP server.
D-Link DCS-4802E User Manual

Section 3: Configuration
Device Management
You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera.
You may also use this section to create a unique name and configure the OSD settings for your camera.
Admin Password Setting: Set a new password for the administrator’s account.
Add User Account: Add a new user account.
User Name: Enter the user name for the new account.
Password: Enter the password for the new account.
User List: All the existing user accounts will be displayed here. You
may delete accounts included in the list, but you may
want to reserve at least one as a guest account.
IP Camera Name: Create a unique name for your camera that will be added
to the file name prefix when creating a snapshot or a
video clip.
Enable OSD: Select this option to enable the On-Screen Display
feature for your camera.
Label: Enter a label for the camera, which will be shown on the
OSD when it is enabled.
Show Time: Select this option to enable the time-stamp display on
the video screen.
LED: You may specify whether or not to illuminate the status
LED on the camera.
D-Link DCS-4802E User Manual

Section 3: Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard Drive: You may save your current camera configuration as a file
on your computer.
Load From Local Hard Drive: Locate a pre-saved configuration by clicking Browse and
then restore the pre-defined settings to your camera by
clicking Load Configuration.
Restore to Factory Defaults: You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
Reboot Device: This will restart your camera.
Enable Schedule Reboot: If you want your camera to reboot on a regular schedule,
check the Enable Schedule Reboot checkbox, then
select the days and time you want the camera to reboot
D-Link DCS-4802E User Manual

Section 3: Configuration
Firmware Upgrade
The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available
firmware version.
To upgrade the firmware on your DCS-4802E, please download and save the latest firmware version from the D-Link Support Page to your local
hard drive. Locate the file on your local hard drive by clicking the Browse button. Select the file and click the Upload button to start upgrading the
Current Firmware Version: Displays the detected firmware version.
Current Product Name: Displays the camera model name.
File Path: Locate the file (upgraded firmware) on your hard drive
by clicking Browse.
Upload: Uploads the new firmware to your camera.
D-Link DCS-4802E User Manual

Section 3: Configuration
Device Info
This page displays detailed information about your device and network connection.
D-Link DCS-4802E User Manual

Section 3: Configuration
This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete
the saved log information.
D-Link DCS-4802E User Manual

Section 3: Configuration
This page provides helpful information regarding camera operation.
D-Link DCS-4802E User Manual

Appendix A: Technical Specifications
Technical Specifications
Camera Hardware

ƒ 1/3" 2 Megapixel progressive CMOS sensor
ƒ Angle of view:

ƒ 20 meter IR illumination distance
ƒ (H) 96°

ƒ Minimum illumination: 0 lux with IR LED on
ƒ (V) 54°

ƒ Built-in Infrared-Cut Removable (ICR) Filter module
ƒ (D) 108°

ƒ 10x digital zoom
ƒ Adjustment angle (non-motorized):

ƒ Minimum object distance 0.2M
ƒ Vertical: 75°

ƒ Focal length: 2.8 mm
ƒ Horizontal: 360°

ƒ Aperture: F2.0
ƒ Rotation: 360°
Camera Housing

ƒ IP-66 compliant weatherproof housing
Image Features

ƒ Configurable image size, quality, frame rate, and bit rate

ƒ Configurable privacy mask zones

ƒ Time stamp and text overlays

ƒ Configurable shutter speed, brightness, saturation, contrast,

ƒ Configurable motion detection windows
sharpness, WDR, and 3D filter
Video Compression

ƒ Simultaneous H.264/MJPEG format compression

ƒ JPEG for still images

ƒ H.264/MJPEG multicast streaming
Video Resolution
16:9 - 1920 x 1080, 1280 x 720, 800 x 448, 640 x 360 up to 30 fps
4:3 - 1440 x 1080, 1280 x 960, 1024 x 768, 800 x 592, 640 x 480 up
to 30 fps
External Device

ƒ 10/100 BASE-TX Fast Ethernet port

ƒ Supports 802.3af PoE Class 2
Network Protocols

ƒ IPv6


ƒ IPv4

ƒ Samba client




ƒ UPnP port forwarding




ƒ IP filtering

ƒ DHCP client

ƒ Multicast

ƒ NTP client (D-Link)

ƒ CoS

ƒ DNS client


ƒ DDNS client (D-Link)


ƒ SMTP client

ƒ ONVIF compliant

ƒ FTP client

ƒ Bonjour
Administrator and user group protection
HTTP and RTSP authentication
Password authentication
D-Link DCS-4802E User Manual

Appendix A: Technical Specifications
Management Requirements for

ƒ Browser: Internet Explorer, Firefox, Safari
Web Interface
Event Management

ƒ Motion detection

ƒ Supports multiple SMTP and FTP servers

ƒ Event notification and uploading of snapshots/video clips via

ƒ Multiple event notifications
e-mail or FTP

ƒ Multiple recording methods for easy backup

ƒ Take snapshots/video clips and save to local hard drive

ƒ Configuration interface accessible via web browser
D-ViewCam™ System
ƒ Operating System: Microsoft Windows 8/7/Vista

ƒ Protocol: Standard TCP/IP

ƒ Web Browser: Internet Explorer 7 or higher

ƒ Remote management/control of up to 32 cameras

ƒ Supports all management functions provided in web interface
Software Functions

ƒ Viewing of up to 32 cameras on one screen

ƒ Scheduled motion triggered, or manual recording options
370 g ± 5%
External Power
Adapter (not
Input: 100 to 240 V AC, 50/60 Hz
Output: 12 V DC 1.5 A
Power Consumption 5.2 watts ± 5% (PoE Class 2)
Operating: -30 to 50 °C (-22 to 122 °F)
Storage: -20° to 70° C (-4° to 158° F)
Operating: 20% to 80% non-condensing
Storage: 5% to 95% non-condensing
D-Link DCS-4802E User Manual

Appendix A: Technical Specifications
Ø113 mm
85 mm
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Regulatory Information
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Industry Canada Statement:
This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Union
CE EMI Class A Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Safety Instructions
Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential
damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not
expressly approved by D-Link may result in the loss of product warranty.
Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:
• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from
the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited
by local law.
• Modify or alter the device.
• Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following
Power Sources
• Observe and follow service markings.
• Do not push any objects into the openings of your device unless consistent with the authorized operation of the device.
Doing so can cause a fire or an electrical shock by shorting out interior components.
• The powering of this device must adhere to the power specifications indicated for this product.
• Do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical shock.
• Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for
• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure
that nothing rests on any cables.
• Operate the device only from the type of external power source indicated on the electrical ratings label.
• To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match
the power available at your location.
• Also be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option
intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your
device. The power cable must be rated for the device and for the voltage and current marked on the device's electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the device.
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
• To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets.
These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the
grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.
• Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension
cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
• To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
conditioner, or uninterruptible power supply (UPS).
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always
follow your local/national wiring rules.
• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following
• Install the power supply before connecting the power cable to the power supply.
• Unplug the power cable before removing the power supply.
• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the
power supplies.
• Do not service any product except as expressly set forth in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical
shock. Only a trained service technician should service components inside these compartments.
• To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-replaceable; therefore,
there is no reason to access the interior.
• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device
gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
• Use the device only with approved equipment.
• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops
and uneven surfaces.
• Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).
• Do not use this device in areas with high humidity.
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
• This device must not be subjected to water or condensation.
• Keep your device away from radiators and heat sources. Also, do not block cooling vents.
• Always unplug the power before cleaning this device.
• Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices.
• Use a dry cloth for cleaning.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from
your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically
touching an unpainted metal surface on the chassis.
You can also take the following steps to help prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic
packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging,
be sure to discharge static electricity from your body.
2. When transporting a sensitive component, first place it in an antistatic container or packaging.
3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic
grounding strap.

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Disposing of and Recycling Your Product
ENGLISH This symbol on the product or packaging means that according to local laws and regulations this product
should be not be disposed of in the household waste but sent for recycling. Please take it to a collection point
designated by your local authorities once it has reached the end of its life, some will accept products for free.
By recycling the product and its packaging in this manner you help to conserve the environment and protect
human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the
environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible,
by using recyclable, low toxic materials in both products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you
will help to save energy and reduce CO2 emissions.

To learn more about our environmentally responsible products and packaging please visit

Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender
örtlicher Gesetze und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer
Wiederverwertung zuzuführen ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend
amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Für
die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf diese Weise
durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die
menschliche Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und
fühlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit
dem Ziel größtmöglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei
Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.

Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende
Informationen im Internet unter


Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations
locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un
point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En
recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la
santé de l’homme.

D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons
à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en
utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.

D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez
ainsi des économies d’énergie et réduirez vos émissions de CO2.

Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.


Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este
producto no se debe desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida
designado por las autoridades locales una vez que ha llegado al fin de su vida útil; algunos de ellos aceptan
recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el
medio ambiente y a proteger la salud de los seres humanos.

D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades
y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean
lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link DCS-4802E User Manual

Appendix B: Regulatory Information

D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a
ahorrar energía y a reducir las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio

La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi
e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una
volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali.
Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto
e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la salute umana.

D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre
al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente,
utilizzando materiali riciclabili a basso tasso di tossicità sia per i prodotti che per gli imballaggi.

D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo
modo si contribuirà a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.

Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet
mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra
het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe
werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u
hiervoor dient te betalen.
Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de
mens te beschermen.

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze
impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van
recycleerbare producten met lage toxiciteit in product en verpakking.

D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door
dit te doen bespaart u energie en beperkt u de CO2-emissies.
Breng een bezoek aan voor meer informatie over onze milieuverantwoorde producten en

Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi
przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz
należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do
tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki
wskazanego przez lokalne władze.
Poprzez proces recyklingu i dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą
Państwo chronić środowisko naturalne i dbać o ludzkie zdrowie.

D-Link i środowisko
W D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu
naszych działań i produktów na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje
i wytwarza swoje produkty w taki sposób, aby były one jak najbardziej przyjazne środowisku, stosując do tych celów
materiały nadające się do powtórnego wykorzystania, charakteryzujące się małą toksycznością zarówno w przypadku
samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one
wykorzystywane. Postępując w ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.

"Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko
prosimy zapoznać się ze stroną internetową"

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí
vyhazovat do komunálního odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné
místo určené místními úřady k tomuto účelu. Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku
i obalu pomáháte chránit životní prostředí i lidské zdraví.

D-Link a životní prostředí
"Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a
snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve
výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály."
"Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze
zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2."

Více informací o našich ekologických výrobcích a obalech najdete na adrese

Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak
megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra
kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt
gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és a csomagolás újrahasznosításával
segíti védeni a környezetet és az emberek egészségét.

A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre
gyakorolt hatásainak csökkentésére. Az ezen hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát
termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-tartalmú termékeket gyárt és
csomagolásokat alkalmaz.

A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a
tápforrásból, ha nem használja azokat. Ezzel segít az energia megtakarításában és a széndioxid kibocsátásának
Környezetbarát termékeinkről és csomagolásainkról további információkat a weboldalon tudhat meg.

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke
skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning.
Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når det er kommet til slutten av levetiden.
Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet og forpakningen
hjelper du å verne miljøet og beskytte folks helse.

D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet.
For å minimalisere denne innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke
resirkulerbare, lav-toksiske materialer både i produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare
energi og å redusere CO2-utslipp.

"For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til"


Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må
bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever
produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets
levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til
genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.

D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på
miljøet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som
muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage.

D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du
til at spare energi og reducere CO2-udledningerne.

Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä
tuotetta ei pidä hävittää yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on
elinkaarensa päässä, toimita se lähimpään viranomaisten
hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä
ympäristön että ihmisten terveyttä ja hyvinvointia.

D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta
ympäristölle mahdollisesti aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee
ja valmistaa tuotteensa mahdollisimman ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia
aineita sisältäviä materiaaleja sekä tuotteissaan että niiden pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin
autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä.
"Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www."

Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter
inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din
lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt
återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.

D-Link och miljön

På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och
produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska
vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att
göra detta hjälper du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar

D-Link DCS-4802E User Manual

Appendix B: Regulatory Information
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais,
este produto não deverá ser eliminado juntamente com o lixo doméstico mas enviado para a reciclagem.
Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o
fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva
embalagem desta forma, ajuda a preservar o
ambiente e protege a saúde humana.

A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas
operações e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constrói os seus produtos
para que estes sejam o mais inofensivos para o ambiente possível, utilizando meteriais recicláveis e não tóxicos tanto nos
produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção
ajudará a poupar energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite
D-Link DCS-4802E User Manual

Document Outline