Version 1.00 | 12/15/2015
User Manual
HD Pan & Tilt Wi-Fi Day/Night Camera

Manual Overview
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to the website for the most current information.
Manual Revision
15 December, 2015
Initial A1 release
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and
other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of
Google Inc. Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2015 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part,
without prior expressed written permission from D-Link Corporation, Inc.
D-Link DCS-5030L User Manual

Table of Contents
Table of Contents
Product Overview ..............................................................5
Internet Connection Setup Wizard ........................30
Package Contents ......................................................................... 5
Network Setup .....................................................................32
System Requirements ................................................................. 6
Wireless Setup ......................................................................34
Introduction ................................................................................... 7
Extender Setup ....................................................................35
Features ............................................................................................ 8
Dynamic DNS (DDNS) .......................................................37
Hardware Overview ...................................................................10
Image Setup .........................................................................38
Front View ..............................................................................10
Video .......................................................................................39
Rear View ...............................................................................11
Audio .......................................................................................40
Motion Detection ...............................................................41
Installation .......................................................................12
Sound Detection .................................................................42
Mobile App Setup ......................................................................13
Mail ..........................................................................................43
mydlink Lite ..................................................................................14
FTP ............................................................................................46
Zero Configuration Setup ........................................................15
Time and Date ......................................................................49
Camera Setup Wizard ................................................................18
Day/Night Mode .................................................................50
Windows Users ....................................................................18
Camera Control ...................................................................51
Mac Users...............................................................................19
SD Recording ........................................................................53
Manual Hardware Installation ................................................20
SD Management .................................................................55
Wireless Installation Considerations ....................................21
Maintenance ................................................................................56
WPS - Push Button Setup .........................................................22
Admin .....................................................................................56
Mounting the Camera...............................................................23
System ....................................................................................58
mydlink ...........................................................................................25
Firmware Upgrade ..............................................................59
Configuration ...................................................................26
Status ..............................................................................................60
Device Info ............................................................................60
Using the Web Configuration Interface ..............................26
Active User ............................................................................61
Live Video ......................................................................................27
Help .........................................................................................62
Setup Wizard ................................................................................29
D-Link DCS-5030L User Manual

Table of Contents
Troubleshooting ..............................................................63
Technical Specifications ..................................................66
Regulatory Statements ...................................................68
D-Link DCS-5030L User Manual

Section 1 - Product Overview
Package Contents
DCS-5030L HD Pan & Tilt Wi-Fi Day/Night Camera
Micro-USB Power Adapter
Camera Base and Mounting Kit
Quick Install Guide
CAT5 Ethernet Cable
Quick Install Card
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty
for this product.
D-Link DCS-5030L User Manual

Section 1 - Product Overview
System Requirements
• 10/100 Ethernet network or a 802.11n/g wireless network
Network Requirements
• An Internet connection
• A router connected to your broadband modem
Computer with the following:
• A PC with a wired connection to your router
Setup Wizard Requirements
• Windows® 10, 8 (32/64-bit), 7 (32/64-bit), Vista® (32/64-bit),
Mac OS®X 10.7 or above
Browser Requirements:
• Internet Explorer 8 or higher
Web-based Configuration Utility
• Firefox 12 or higher
• Safari 6 or higher
Note: Make sure you have the latest version of Java installed.
Visit to download the latest version.
• Broadband Internet connection
Computer with:
• Internet Explorer 8 or higher (ActiveX)
mydlink Website Requirements
• Firefox 12 or higher
• Safari 6 or higher
• Chrome 20 or higher
D-Link DCS-5030L User Manual

Section 1 - Product Overview
Congratulations on your purchase of the DCS-5030L HD Pan & Tilt Wi-Fi Day/Night Camera. The DCS-5030L is a versatile and
unique solution for your home or small office. Unlike a standard webcam, the DCS-5030L is a complete system with a built-in
CPU, web server, and wireless networking device that transmits high-quality video images for security and surveillance. The
pan/tilt function allows the camera to patrol a wide area, while the built-in IR LEDs provide around-the-clock surveillance
regardless of the lighting conditions.
The DCS-5030L can be accessed remotely, and controlled from any PC/laptop over your local network or through the Internet
via a web browser. The simple installation and intuitive web-based interface offer easy integration with your Ethernet/Fast
Ethernet or 802.11 n/g wireless network, with Wireless N technology you have the freedom to place the DCS-5030L anywhere
within range of your existing wireless network. The DCS-5030L also comes with remote monitoring and motion detection
features for a customizable, cost-effective security solution.
Your DCS-5030L is mydlink-enabled, which means that you can view and manage your camera over the Internet through the
mydlink website, or through the mydlink mobile app for iOS and Android. You can view your live video feed, take snapshots,
and manage the camera’s configuration, all from anywhere you have Internet access.
D-Link DCS-5030L User Manual

Section 1 - Product Overview
Easy to Use and mydlink-Enabled for Easy Access and Management
The DCS-5030L is a standalone surveillance camera that requires no special hardware or software, and can operate independently,
even without a PC. This camera is also mydlink-enabled, which means you can view and manage your camera through the mydlink
website, or through the mydlink mobile app for iOS and Android mobile devices.
Pan/Tilt for Wide Viewing Area
Patrol a large area with one camera thanks to the DCS-5030L’s pan and tilt functions. You can use the web interface to manually adjust
the camera lens position, or set up to 24 pre-defined preset positions, enabling you to quickly move to frequently viewed points of
IR LEDs for Day and Night Functionality
The built-in infrared LEDs enable night time viewing of up to 8 meters (26 feet), giving you clear images regardless of lighting condi-
H.264 Codec for Smooth, Space-Efficient Video
This camera supports use of the H.264 video codec, which gives you high-quality video with reduced bandwidth requirements. This
means that you can enjoy smoother, more reliable video streaming over the Internet, and less disk space is required to save record-
Motion and Sound Triggered Notifications and Recordings
The DCS-5030L can send e-mail notifications with snapshots or video clips whenever motion or sound is detected. You can customize
areas of the video to monitor for motion to keep watch over specific areas of interest, and you can set volume thresholds to determine
the sound level required to trigger a sound notification.
D-Link DCS-5030L User Manual

Section 1 - Product Overview
802.11n/g/b Wireless or Ethernet/Fast Ethernet Support
The DCS-5030L offers wireless 802.11n/g/b and Ethernet/Fast Ethernet connectivity, making it easy to integrate into your existing net-
work environment. The DCS-5030L works with either a 10 Mbps Ethernet-based network or 100 Mbps Fast Ethernet-based network
for traditional wired environments, and works with 802.11n/g/b wireless routers or access points for added flexibility. The Site Survey
feature also allows you to view and connect to any available wireless networks within range of the camera.
Micro-USB Powered for Convenience
For added convenience, the DCS-5030L can be powered via any Micro-USB cable, so you don’t have to worry about looking
for a matching power adapter when setting it up for use. Simply use the included or standard Micro-USB cable and plug it into
any USB power adapter or powered USB port and it’ll be powered on and ready for use.
Remote Monitoring with mydlink Lite App
With the mydlink Lite app for mobile devices, you can easily view live streams and manage your camera from anywhere with an In-
ternet connection.
D-Link DCS-5030L User Manual

Section 1 - Product Overview
Hardware Overview
Front View
Light Sensor
The IR-Cut Removable sensor monitors lighting conditions and switches between
color and infrared accordingly.
Camera Lens
Records video of the surrounding area.
Manual Focus Bezel
Manually adjust the focus of the lens for your required view.
Indicates the WPS connection status of the camera.
Records audio from the surrounding area.
Infrared LEDs
Illuminate the camera’s field of view in low light environments..
Power and Link LED
Indicates the camera’s current status.
D-Link DCS-5030L User Manual

Section 1 - Product Overview
Rear View
WPS Button
Press this button, then press the WPS button for 5 seconds on your router to set up
a wireless connection automatically.
Ethernet Port
RJ45 connector for Ethernet.
Reset Button
Press and hold this button for 10 seconds to reset the camera.
Micro-USB Port
Connect a Micro-USB cable here to power on the camera.
microSD Port
Insert a microSD card to record to the card.
D-Link DCS-5030L User Manual

Section 2 - Installation
There are three ways to set up your camera:
• Mobile App Setup: You can set up your DCS-5030L with the free mydlink Lite app. Refer to Mobile App Setup
on page 13.
• Zero Configuration Setup: If you have a mydlink-enabled router (D-Link cloud router), this is the easiest way
to set up your camera. Refer to Zero Configuration Setup on page 15.
• Camera Installation Wizard: If you do not have a mydlink-enabled router, use the Camera Installation Wizard to
guide you through setup and initial configuration of your camera. Refer to Camera Setup Wizard on page 18..
• Manual Hardware Installation: This section shows you how to manually set up your camera, however in order
to use the mydlink features of your camera, you will still need to run the Camera Installation Wizard. Refer to
Manual Hardware Installation on page 20.
D-Link DCS-5030L User Manual

Section 2 - Installation
Mobile App Setup
The mydlink Lite app allows you to configure your camera without a PC, and lets your camera work together with other
mydlink Lite compatible devices. Search for the free mydlink Lite app on the App Store or Google Play and download it to
your smartphone or tablet. You can also use a QR code reading app to scan the corresponding code for your device below.
D-Link DCS-5030L User Manual

Section 2 - Installation
mydlink Lite
You can monitor your camera using the mydlink Lite app either from your local network (same as the camera’s) or remotely
from anywhere with an Internet connection. To use either method, follow the steps below:
To view your camera feed on a local network:
1. Using your mobile, connect to the same wireless network as your camera.
2. Download the mydlink Lite app using a QR code in the previous page.

mydlink Lite
3. On the login page, tap Local. The app will automatically discover any D-Link
cameras in your network.
4. Tap the DCS-5030L icon to begin setup.
5. Enter your camera’s administrator password (it will be on your Quick Install
Card if you haven’t configured it). Tick the Remember Me box and tap OK.
You will be taken to the Live View page of your camera.
To view your camera feed remotely:
1. To enable remote monitoring, you will need to use mydlink services. Start the
mydlink Lite app on your mobile device.
2. If you already have an account, you can tap Sign In. If you don’t have a myd-
link account and want to register for one, you can tap the New users, sign
up here. link to start the registration process.
D-Link DCS-5030L User Manual

Section 2 - Installation
Zero Configuration Setup
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration
automatically configures your camera's settings such as Wi-Fi name/password for you, and adds the camera to your mydlink
account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-5030L
and add the camera to your mydlink account. After a short period of time, you will be able to remotely access your camera
from the website to manage and monitor your DCS-5030L.
Connect the Ethernet Cable and the Micro-USB Plug
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your D-link Cloud Router. If you wish to use
your camera wirelessly, you will be able to remove the cable after Zero
Configuration Setup is complete. Plug one end of the included Micro-USB
power adapter to the back of the camera.
Plug the Micro-USB Power Adapter to a Wall Outlet
Plug the other end of the Micro-USB power adapter to a wall outlet to power
on your camera.
D-Link DCS-5030L User Manual

Section 2 - Installation
Check Your mydlink Account
From any computer with an Internet connection, open a web browser and
login to your mydlink account. The mydlink page will check for new devices
and display a New device Found! pop-up notification in the bottom-left
corner. Click the notification to continue.
A summary and confirmation notification will appear with the automatically
configured details. Make a note of the details and click Yes to add the camera
to your account.
D-Link DCS-5030L User Manual

Section 2 - Installation
During the Zero Configuration process, you will be directed to the mydlink Live
View tab for your camera where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the
camera, and no further configuration is required.
Your camera is now set up, and you can skip to mydlink on page 25 to
learn more about the mydlink features of this camera, or to Configuration
on page 26 for advanced configuration of your camera.
Note: If the live image is blurry or out of focus, you can manually adjust the
focus by rotating the manual focus bezel surrounding the camera lens.
D-Link DCS-5030L User Manual

Section 2 - Installation
Camera Setup Wizard
If you do not have a mydlink-enabled cloud router, you can use the Camera Setup Wizard to guide you through the process
of adding your camera to the mydlink service.
Windows Users
To begin the setup process, please go to to download the Setup Wizard. Once the file has
been downloaded, browse to the folder the file is in and double click on it to start the wizard. Simply click Set up your Cloud
Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting
your hardware to configuring your camera and registering it with your mydlink account.
D-Link DCS-5030L User Manual

Section 2 - Installation
Mac Users
To begin the setup process, please go to to download
the Setup Wizard. Once the file has been downloaded, browse to the folder the file is in and
double-click on the SetupWizard file to start the wizard.
After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process
from connecting your hardware to configuring your camera and registering it with your mydlink account.
D-Link DCS-5030L User Manual

Section 2 - Installation
Manual Hardware Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero
Configuration Setup.
Connect the Ethernet Cable and the Micro-USB Plug
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available LAN port on your router. Plug one end of the included
Micro-USB power adapter to the back of the camera.
Plug the Micro-USB Power Adapter to a Wall Outlet
Plug the other end of the Micro-USB power adapter to a wall outlet to power
on your camera.
Configure Your Camera
Refer to Configuration on page 26 for information on how to configure
your camera.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more
information, refer to WPS - Push Button Setup on page 22. If your router
does not support WPS, you will still be able to set up your camera’s wireless
settings in the camera’s web interface.
D-Link DCS-5030L User Manual

Section 2 - Installation
Wireless Installation Considerations
Your D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the
operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your
Network Camera) - each wall or ceiling can reduce your adapter’s range by 1-30 meters (3-90 feet).
2. Be aware of the direct line between network devices. A wall that is half a meter thick (1.5 feet), at a 45-degree
angle appears to be almost 1 meter (3 feet) thick. At a 2-degree angle, it can appear over 14 meters (42 feet)
thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle)
for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may weaken the wireless signal. Try
to position your access points, wireless routers, and other networking devices where the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish
tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product at least or 1-2 meters (3-6 feet ) away from electrical devices or appliances that generate RF
5. If you are using 2.4 GHz cordless phones or other radio frequency sources (such as microwave ovens), your
wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as
far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
D-Link DCS-5030L User Manual

Section 2 - Installation
WPS - Push Button Setup
If your router supports Wi-Fi Protected Setup (WPS), you can create a secure wireless connection using the WPS Button on the
back of the camera. Please note that WPS setup only establishes a secure wireless connection, and you will still need to run
the Setup Wizard to configure your camera.
To create a WPS connection:
Step 1
Make sure the camera is plugged in, then press and hold the WPS button for
ten seconds. The blue WPS status LED will start blinking.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is
usually on the front or side of your router. On some routers, you may need
to log in to the web interface and click on an on-screen button to activate
the WPS feature. If you are not sure where the WPS button is on your router,
please refer to your router’s User Manual.
The DCS-5030L will automatically create a secure wireless connection to your
router. While connecting, the blue LED will flash and your camera will reboot.
Note: You can also set up a wireless connection manual y; please see Wireless
WPS Button
Setup on page 34.
D-Link DCS-5030L User Manual

Section 2 - Installation
Mounting the Camera
To mount your camera on a wall or ceiling, please follow the steps below.
It is suggested that you configure the camera before mounting.
Place the mounting bracket where you want to position the camera and use a
pencil to mark the holes.
Use appropriate tools to drill two holes the same diameter as the plastic anchors.
After drilling the holes, insert the plastic anchors to support the screws.
If desired, the power and Ethernet cables can be concealed behind the
mounting bracket. Run the cables through the back of the mounting bracket,
securing them with the built-in guides. Be sure to leave enough cable length
protruding from the top to allow connection to the camera.
D-Link DCS-5030L User Manual

Section 2 - Installation
Fasten the mounting bracket to the wall using the screws provided.
Do not overtighten the screws as this may crack the mounting bracket.
Using the supplied thumbscrew, fasten the camera to the mounting bracket.
Connect the power and Ethernet cables to the camera.
Adjust the angle of the arm on the mounting bracket as required. Tighten the
thumbscrew to lock the arm in place.
D-Link DCS-5030L User Manual

Section 2 - Installation
After registering your DCS-5030L camera with a mydlink account in the Camera Installation Wizard, you will be able to remotely
access your camera from the website. After signing in to your mydlink account, you will see a screen similar
to the following:
D-Link DCS-5030L User Manual

Section 3 - Configuration
Using the Web Configuration Interface
After completing the Camera Installation Wizard, your camera is ready to use. The camera’s built-in web configuration interface
is designed to allow you to easily access and configure your DCS-5030L. There are two ways in which you can access your
camera’s web configuration interface:
• Log in to your mydlink account to access your camera’s configuration interface.
• You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
Explorer®. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create
a password, leave the password field blank. After entering your password, click OK.
Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP
is If the camera is connected to a router or network, a different IP address may have been assigned.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Live Video
The Live Video screen shows you the live video feed from your camera. For information on how to configure your Live Video
streams, refer to Video on page 39.
Video Click the H.264 or MJPEG radio button to choose which stream
Compression to view.
Pan/Tilt Click on the directional arrows on the pan/tilt wheel to manually
Wheel: control the pan and tilt functions of the camera. At any time, you
can click the home button in the center of the wheel to return
the camera to its home position.
Go To: Select one of the preset locations from the drop-down menu
to move the camera to that position. Preset positions can be
set by going to the Camera Control section of the Setup menu.
Pan Step: Select the increment of movement for each press of a pan (up/
down)arrow on the pan/tilt wheel.
Tilt Step: Select the increment of movement for each press of a tilt (left/
right) arrow on the pan/tilt wheel.
Language: You can select the desired language for the web interface from
this drop-down menu.
Zoom: Click on these buttons to adjust the level of digital zoom applied
to the image
D-Link DCS-5030L User Manual

Section 3 - Configuration
Audio: Click on these buttons to turn audio playback on and off.
Night Mode: If you have set the night mode to manual, the night mode
feature can be toggled using these buttons.
Note: If the live image is blurry or out of focus, you can manually
adjust the focus by rotating the manual focus bezel surrounding
the camera lens.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Setup Wizard
You may choose to configure your Internet connection by using the Internet
Connection Setup Wizard that includes step-by-step instructions. Otherwise,
you may manually configure your connection using the Manual Internet
Connection Setup.
Note: To register your camera with mydlink and enable its mydlink-related
features, you will need to use the Camera Installation Wizard. Please refer to
Camera Setup Wizard on page 18 for more details.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use:
• DHCP Connection (Default): If you are connected to a router, or
are not sure which connection to use, select DHCP Connection.
• Static IP Address: This will allow you to manually enter your
network settings for the camera. Select this option if your Internet
Service Provider or network administrator has provided you with
a set of predefined IP addresses. If you are not sure what settings
to enter, check with your Internet Service Provider or network
• PPPoE Connection: If your camera is directly connected to a
DSL modem, you may need to use PPPoE. Enter the username
and password provided to you by your Internet Service Provider.
Click Next to continue.
D-Link DCS-5030L User Manual

Section 3 - Configuration
If you have a Dynamic DNS account and would like the camera to update
your IP address automatically, select Enable and enter your host information.
Otherwise, simply select Disable.
Click Next to continue.
Enter a name for your camera. Click Next to continue.
Configure the correct time to ensure that all events are triggered, captured,
and scheduled at the right time. Click Next to continue.
This page displays your configured settings. Click Apply to save and activate
your changes, or click Back to change your settings.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Network Setup
This section allows you to configure your network settings.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be assigned to
your camera automatically.
Static IP Select this connection type if your Internet Service Provider (ISP)
Client: or network administrator has provided you with a static or fixed
IP address and other network information for your camera. Click
on the Static IP Address radio button to activate this method.
IP Address: The fixed IP address
Subnet Mask: The default value is “” Used to
determine if the destination is the same subnet.
Default Gateway: The gateway used to forward data to
destinations in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different subnet.
Primary DNS: Primary domain name server that translates
names to IP addresses.
Secondary DNS: Secondary domain name server to backup
the Primary DNS.
PPPoE: If you need to connect to the Internet using a PPoE connection,
click on the PPPoE radio button and enter the username and
password provided to you by your Internet Service Provider or
Network Administrator.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Port Settings: You may configure a second HTTP port that will allow you
to connect to the camera via a standard web browser. The
port can be set to a number other than the default TCP
port of 80. A corresponding port must be opened on the
router. For example, if the port is changed to 1010, users
must type instead of only
UPnP Enable this setting to configure your camera as a UPnP device
Settings: in the network. You can also enable UPnP port forwarding.
Bonjour Enable this setting to allow your camera to be discovered by
Settings: the Bonjour service. You can also specify a Bonjour name for
the device.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Wireless Setup
This section allows you to set up and configure the wireless settings on your camera.
Enable Check this box to al ow your camera to connect to your network
Wireless: wirelessly.
SSID: Enter the network name (SSID) of the wireless network you want
to connect to. You can also click the Site Survey button below
to choose an available network and fill in settings automatically.
Channel: If you are using Ad-Hoc as your connection mode, select the
same channel that is being used by your wireless network.
Connection Select the connection mode used by your wireless network. In
Mode: most cases, you should select Infrastructure. Ad-Hoc is only
used if your camera is directly connecting to another PC or
device without the use of a router or access point.
Site Survey: Clicking this button will allow you to select an available wireless
network to connect to, and will fill in the necessary settings for
Wireless Select the wireless security mode used by your wireless network.
Security If you select WEP or WPA-PSK/WPA2-PSK, enter the password
Mode: for your wireless network in the text box that appears.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Extender Setup
This section allows you to setup and configure the Extender Mode feature of your camera. Extender Mode allows your camera
to extend the range of your existing wireless network by repeating the signal it receives. You can choose to use the same
network name and settings as your existing wireless network, or you can create a new one.
Enable Check this box to enable Extender Mode.
Host Wireless This shows the name of the Host wireless network that the
Network camera is connected to and will extend.
Extended Select an option:
Wireless • Same as Host Wireless Network Name: Your extended
network will use the same name and settings as your
Name (SSID):
Host network. Your devices can use the same wireless
information to connect to both the Host and Extended
• Create a New Wireless Network Name: This allows
you to manually set the name and security used for the
extended network. You will need to add this information
for each wireless device that connects to this Extended
Maximum Set the maximum number of clients that are allowed to connect
Clients to the extended network.
Allowed to
D-Link DCS-5030L User Manual

Section 3 - Configuration
Security If you choose to Create a New Wireless Network Name, you
Mode: can set your wireless security options here.
• None - No wireless encryption will be enabled. All data
sent over the wireless connection could be viewed by
third parties.
• WEP - WEP is the simplest form of wireless encryption,
and should only be used if you devices do not support
WPA/WPA2 encryption.
• WPA/WPA2 - This is currently the most advanced
encryption method. Enter a Pre-shared Key (PSK/
password) in the text box provided. Wireless clients will
require this password in order to access your extended
D-Link DCS-5030L User Manual

Section 3 - Configuration
Dynamic DNS (DDNS)
This section allows you to configure the DDNS setting for your camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.
Enable: Click to enable the DDNS function.
Server Select your Dynamic DNS Server from the pull down menu.
Host Name: Enter the host name of the DDNS server.
User Name: Enter your username or e-mail used to connect to the DDNS.
Password: Enter your password used to connect to the DDNS server.
Timeout: This allows you to specify the periodic update time for the DDNS
D-Link DCS-5030L User Manual

Section 3 - Configuration
Image Setup
This section allows you to configure the image settings for your camera.
Enable If you have lights flickering in your camera video, try enabling
Antiflicker: antiflicker. Otherwise, you should leave this disabled.
Flip Image: Select this box to vertically flip the video.
Mirror: Horizontally flip the video.
Note: If the camera is installed upside down, Flip Image and
Mirror should both be checked
Brightness Allows you to adjust the brightness level. Select a setting
Control: between -5 and +5.
Contrast Allows you to adjust the contrast level. Select a setting between
Control: -5 and +5.
Saturation Allows you to adjust the saturation level. Select a setting
Control: between -5 and +5.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure the video settings for your camera.
Video Profile: This section allows you to change the Resolution, FPS, and
Encode Type: Your camera has separate settings for the H.264 and MJPEG
video streams.
Resolution: Select the desired video resolution from three formats: 1280 x
720, 640 x 480, , and 320 x 240. Higher settings offer better
quality, but will require more bandwidth to stream.
Bit Rate Select the desired bit rate for the video. A higher bit rate will
increase image quality, but will require more bandwidth to
Frame Rate: Select the frame rate (FPS) to use for the video stream. Higher
settings offer better quality, but will require more bandwidth
to stream.
JPEG Quality: Select one of five levels of image quality: Very High, High,
Medium, Low, and Very Low.
Default View Select the default encoding to use when viewing your video
Mode: on the Live Video page.
Light Select the frequency used by your lighting and power to help
Frequency: reduce image flicker.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to adjust the audio settings for your camera.
Note: Please wait a few seconds for the camera to adjust the audio after making changes.
Audio You may Enable or Disable the camera audio feed.
Volume Select the desired volume percentage level.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Motion Detection
Motion detection allows you to mark areas of your camera’s video to monitor for motion, which can be used to trigger snapshots
or recordings. Refer to Mail on page 43 and FTP on page 46 for more details.
Motion Select whether you want to enable or disable the motion
Detection: detection feature of your camera.
Time: Specify whether you want to Always have motion detection
enabled, or according to a Schedule that you define.
Sensitivity: Specify the amount of difference required to determine whether
there was motion.
Detection Use your mouse to click on the areas of the video that you would
Areas: like to monitor for motion.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Sound Detection
Sound detection allows you to detect when there is a loud sound in the area, which can be used to trigger snapshots or
recordings. Refer to Mail on page 43 and FTP on page 46 for more details.
Sound Select whether you want to enable or disable the sound
Detection: detection feature of your camera.
Time: Specify whether you want to Always have motion detection
enabled, or according to a Schedule that you define.
Detection Specify the volume level that a sound must exceed in order to
Level: trigger the sound detection feature. The graph at the bottom
of the page will show the current volume levels being detected
by the camera.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
SMTP Server This is the domain name or IP address of your external e-mail
Address: server.
SMTP Server This allows you to set the port for the SMTP Server. The default
Port: value is 25, and should only be changed if advised by your
e-mail provider.
Sender e-mail This is the e-mail address listed as the sender for your notification
Address: e-mails.
Receiver This is the e-mail address that your notification e-mails will be
e-mail sent to.
User Name: If the SMTP server uses authentication, enter your user name.
Password: If the SMTP server uses authentication, enter your password.
For example, if you want to use Gmail with SSL-TLS for e-mail
notifications, you can follow the setup procedure as below:
Step 1 - Enter “” in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to
Step 3 - Enter your gmail e-mail address in Sender E-mail
D-Link DCS-5030L User Manual

Section 3 - Configuration
Step 4 - Enter the destination e-mail address in Receiver
E-mail Address.
Step 5 - Enter the user name required to access the SMTP
Step 6 - Enter the password required to access the SMTP
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail to the
account listed above.
Note: You can also use STARTTLS, which will use SMTP server
port number 587.
Note: If you want to use a Yahoo SMTP server, the SMTP server
address will be different between each registered region, and
only SMTP port 465 is supported for SSL-TLS.
Enable the Enabling this will allow snapshots to be e-mailed to you in
e-mailing different ways:
of images
to an e-mail • Choosing Always will e-mail snapshots continuously
based on the E-mail Interval specified.
• Choosing Schedule will allow you to schedule when to
start and stop the e-mailing of snapshots.
• Select Motion/Sound Detection if you would like the
camera to e-mail images only when motion or sound is
detected. You can choose whether to e-mail a snapshot
immediately, or e-mail 6 snapshots together, with 3
frames before and after motion/sound was detected. You
can also set the Frame interval time to specify how far
apart the snapshots should be.
D-Link DCS-5030L User Manual

Section 3 - Configuration
E-mail This sets the limit for how frequently e-mail notifications will
Interval: be sent. This can be set from 1 to 65535 seconds.
Enable the Enabling this will allow video clips to be e-mailed to you in
e-mailing of different ways. This is the same as e-mailing images, as specified
video clips above, but will take video clips according to the Video Limit
to an e-mail settings you specify.
Test E-mail This will send a test e-mail according to the e-mail settings you
Account: have specified above.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Host Name: Enter the IP address of the FTP server that you will be connecting
Port: Enter the port of the FTP server that you will be connecting to.
User Name: Enter the user name of your FTP server account.
Password: Enter the password of your FTP server account.
Path: Enter the destination path/folder to save files to on the FTP
Passive Mode: Enabling passive mode may help you reach your FTP server if
your camera is behind a router protected by a firewall.
Enable the Enabling this will allow snapshots to be uploaded in different
uploading of ways:
images to an
FTP server:
• Choosing Always will upload snapshots continuously
based on the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the
camera to upload images only when motion is detected.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Image Set how frequently you want images to be taken and uploaded.
Frequency: You can choose to upload by frames per second, or by seconds
per frame.
Base File Set the desired base file name for your snapshots.
File: Select how you want uploading of snapshots to be handled:
• Overwrite will replace the old snapshot with the new
one. This means you will only have one snapshot that is
updated every time a new one is taken.
• Date/Time Suffix will add the date and time to the end
of the snapshot file name. You can also choose to make
subfolders based on a period of time you specify to help
you organize your snapshots.
• Sequence Number Suffix will add a number to the end
of the snapshot file name up to the number you specify,
after which the oldest files will be overwritten.
Test FTP Clicking on the Test button will send a test JPEG snapshot to
Server: the FTP server specified above to make sure that your settings
are correct.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Enable the Enabling this will allow video clips to be uploaded to your FTP
uploading of server in various ways.
video clips to
an FTP server:
• Choosing Always will upload video continuously, based
on the Video Limit specified below.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of video.
• Select Motion/Sound Detection if you would like the
camera to upload video only when motion or sound is
File Name Set the desired base file name for your videos.
Video Limit: Specify the maximum file size and duration of the videos to be
Test FTP Clicking on the Test button will send a test JPEG snapshot to
Server: the FTP server specified above to make sure that your settings
are correct.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Time and Date
This section allows you to configure the settings of the internal system clocks for your camera.
Time Zone: Select the time zone for your region from the drop-down menu.
Synchronize Enabling this will allow the camera to update its clock
NTP Server: automatically from an NTP server. Select the NTP server closest
to you, and select whether you want to apply daylight saving
Set the Date If Synchronize NTP Server is disabled, you can set the date and
and Time time manually. You can also click on the Copy Your Computer’s
Manually: Time Settings to automatically set the date and time based on
your computer’s settings.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Day/Night Mode
This section allows you to configure when Day and Night modes are used. Day mode uses the infrared cut filter to provide a
corrected color image for times where there is available lighting. Night mode moves the filter out of the way to use all available
light, and turns on the IR LED illuminators to allow for clear black and white video in dark areas with little or no light.
Auto: This mode will automatically switch between Day and Night
mode based on the amount of available lighting.
Manual: This mode allows you to manually switch between modes
through the Live Video page.

Always Day This sets the camera to always use Day mode.
Always Night This sets the camera to always use Night mode.
Day Mode This sets the camera to use Day mode during the times you
Schedule: specify, and will switch to Night mode outside the times you
D-Link DCS-5030L User Manual

Section 3 - Configuration
Camera Control
This section allows you to configure the pan and tilt operations of your camera. You can specify the lens location for the Home
button, and specify up to 24 pre-set lens locations, allowing you to quickly view these pre-determined areas of the camera’s
range from the Live Video screen.
Pan/Tilt Use the directional arrows on the wheel to move the camera
Wheel: lens through its pan and tilt ranges.
Set as Home: Click this button to set the current lens location as the Home
location. Once set, the camera will return to this location
whenever the Home button in the center of the pan/tilt wheel
is clicked.
Default Clicking on this button returns the Home location to the factory
Home: default setting.
Pan Step: Select the increment of movement for each press of a pan (up/
down)arrow on the pan/tilt wheel.
Tilt Step: Select the increment of movement for each press of a tilt (left/
right) arrow on the pan/tilt wheel.
Preset The camera allows you to specify up to 24 pre-determined lens
Position: positions, which can be used to quickly move the camera’s view
to areas of interest.
• Select the number of the position that you would like to
• Use the pan/tilt wheel to move the camera’s lens to the
desired preset position.
D-Link DCS-5030L User Manual

Section 3 - Configuration
• Enter a name to help you easily identify the preset.
• Click on the Set button to save the preset.
• Any pre-saved positions can be cleared by selecting the
desired preset and clicking on the Clear button.
D-Link DCS-5030L User Manual

Section 3 - Configuration
SD Recording
This section allows you to configure the recording schedule and settings for the microSD card in your camera.
Enable Tick the box and select a method of triggering image recording
recording of from Always, Schedule, or Motion/Sound Detection. If you
images to SD chose Schedule, you can then specify the days and times you
card: wish to activate recording.
Recording You can input the time in seconds between each image to be
Interval: recorded.
SD Card: Enter the space in MB that you want to reserve on your SD card
for other recordings. Tick Cyclic if you want to record over old
images as soon as the free space limit is reached.
Enable Tick the box and select a method of triggering video recording
recording of from Always, Schedule, or Motion/Sound Detection. If you
video clip to chose Schedule, you can then specify the days and times you
SD card: wish to activate recording.
File Format: Select either AVI or MP4 (for MPEG4) from the drop-down menu
if you have a preferred format for compatibility on devices. MP4
files are smaller in size but is lower quality if storage is an issue.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Recording Select from 1 to 6 minutes of time for each recording.
SD Card: Enter the space in MB that you want to reserve on your SD card
for other recordings. Tick Cyclic if you want to record over old
images as soon as the free space limit is reached.
Test SD Card: Click the Test button after configuring your settings to test
your system.
D-Link DCS-5030L User Manual

Section 3 - Configuration
SD Management
This page allows you to browse and manage the recorded files on a microSD card which has been inserted into the camera.
Note: It is recommended to use the Format SD Card function when inserting a microSD card for the first time.
Format SD Click to automatically format the SD card and create a folder
Card: for video. Formatting your SD card will erase all data currently
Delete: Click the checkbox under the Delete column to select files meant
for deletion. The Delete button is used to delete the files which
are selected.
Name: The name of file recording.
Size: The file’s size.
Refresh: Click to refresh the page.
Files per Select the number of files to be displayed on a single page. The
page: maximum is 25 files.
Pages: Show the current and total number of pages and lets you jump
to a page.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to change the administrator’s password and configure the server settings for your camera. You can also
manage the user account(s) that are allowed to access to your camera.
Admin To change the admin password used to log into the web
Password: interface, enter the old password, then enter the new password
and retype it in the next text box, then click Apply.
Camera Name: Specify a name for your camera.
LED Control: Select Normal to enable the LEDs on the front of the device, or
select Off to disable the LED. Disabling the LED function may
be useful if you want to make the camera less obvious.
User Access Select Enable to enable user access control or Disable to allow
Control: only the administrator account to access the camera.
Snapshot Select Enable to allow access to the current camera snapshot
URL via the web address indicated.
OSD Time: Select Enable to allow the current time to be added to the
camera video, and select a color to use for the text.
Add User You can create new users to provide viewing access for your
Account: camera’s video. User accounts wil only be able to access the Live
Video section of the web configuration interface, but cannot
access any other parts or change any settings.
D-Link DCS-5030L User Manual

Section 3 - Configuration
User List: To create a new user, enter a user name, password, and retype
the password, then click Add. A maximum of 8 user accounts
can be created.
Displays the account names of authorized users. You can modify
or delete an account by clicking on its modify or delete icon.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local Click the Save Configuration button to save the current camera
Hard Drive: configuration to your local PC.
Load From To load a previously saved configuration, click the Browse...
Local Hard button, select your saved configuration file, then click the
Drive: Restore Configuration From File button.
Restore Click the Restore Factory Defaults button to reset all settings
To Factory back to the factory defaults. Please note that this will erase any
Default: changes you have made to the settings of the camera.
Reboot The Click the Reboot the Device button to reboot the camera.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Firmware Upgrade
Your current firmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for
the latest firmware versions available.
To upgrade the firmware on your DCS-5030L, download the latest firmware from
the D-Link Support Page to your local hard drive. Click the Browse... button
and select the firmware file, then click the Upload button to start the firmware
Warning: The firmware upgrade process must not be interrupted or the camera
may be damaged. When upgrading firmware, do not unplug the camera or your
PC, or close your web browser until the process is complete. It is also highly
recommended that you use a wired connection for your camera and PC when
upgrading firmware.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Device Info
This section displays all the detailed information about your device and network settings.
D-Link DCS-5030L User Manual

Section 3 - Configuration
Active User
This page lists all the active users’ information including the User Name, IP address, and the time that camera access began.
D-Link DCS-5030L User Manual

Section 3 - Configuration
This page lists all the topics and links to respective helpful instructions for each feature.
D-Link DCS-5030L User Manual

Section 4 - Troubleshooting
1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a web browser. This lets you
view your camera feed and manage your camera’s settings when you’re away from home.
To enable Remote Access, simply go through the Camera Installation Wizard. You can also download the wizard from:
After going through the wizard, you should see Remote Status: Enabled on the summary page.
If you see Remote Status: Disabled, make sure that:
• ...the front LED on your camera is lit solid green
• ...your Internet connection is working
• ...your router’s LAN & WAN connections are working properly
• ...your router has UPnP enabled (if your router does not support UPnP, please refer to Appendix A)
• ...your router can get a public IP address
• ...your router’s firmware has been upgraded to the latest version
• have tried rebooting your router by unplugging it, then plugging it back in
After checking the above items, you can click the Retry button to refresh the summary screen to see if Remote Access has
been enabled.
2. What can I do if I forget the password for my camera’s web configuration interface?
If you forget your password, you will need to perform a factory reset of your camera. This process will change all your settings
back to the factory defaults. It is therefore recommended that you make a record of the password for future reference.
To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your
camera is plugged in.
D-Link DCS-5030L User Manual

Section 4 - Troubleshooting
3. The image on the live view is blurry or out of focus, what can I do?
You can manually adjust the focus of the lens by rotating the bezel on the front of the camera (surrounding the lens). While
watching the live view, rotate the bezel until the desired level of focus is achieved.
4. Why don’t the LEDs light up?
The power supply might be faulty. Confirm that you are using the provided DC 12 V power supply for this network camera.
Verify that the power supply is correctly connected. The WPS LED will only turn on if there is a WPS connection present, the
camera may still be functioning correctly even if this LED is not lit. If the camera is functioning normally, the LEDs may have
been disabled. See Admin on page 56 for information about how to enable the LEDs.
5. Why is the camera’s network connection unreliable?
There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device
on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes
= 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not
functioning properly. Please confirm the power for the devices are well connected and functioning properly.
If you are using a wireless connection to connect the camera, be aware of the range limitations of the wireless N standard.
Most wireless N devices have a maximum indoor range of around 70 metres (230 feet). Also be aware that obstacles such as
walls, floors, doors and other solid objects can have an adverse effect on signal range.
6. Why does a series of broad vertical white lines appear through out the image?
It could be that the image sensor has become overloaded when it has been exposed to bright light such as direct exposure
to sunlight or halogen lights. Reposition the camera into a more shaded area immediately, as prolonged exposure to bright
lights will damage the sensor.
D-Link DCS-5030L User Manual

Section 4 - Troubleshooting
7. The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the camera is used in a very low light environment. Try switching to night mode if you are
consistently monitoring a low light area.
8. The images are poor quality, how can I improve the image quality?
Make sure that your computer’s display properties are set to at least 6-bit color. Using 16 or 256 colors on your computer will
produce dithering artifacts in the image, making the image look as if it is of poor quality.
You may also need to check your image settings to make sure the brightness, contrast, and other settings are set properly. For
more, refer to Image Setup on page 38.
9. Why are no images available through the Web browser?
ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the
Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be
installed. Also, check that you have the latest version of Java installed. Java can be downloaded from
If you are using Internet Explorer with a version number 6 or lower, then you will need to upgrade your Web browser software
in order to view the streaming video transmitted by the Network Camera.
D-Link DCS-5030L User Manual

Appendix A - Technical Specifications
Technical Specifications
System Requirements
Wireless Transmit Output Power (typical)
• Microsoft Windows® 101/8/7/Vista, or Mac OS X 10.6 or higher
• 11b - 16 dbm
• PC with 1.3 GHz or above and at least 128 MB RAM
• 11g/11n - 12 dbm
• Internet Explorer 8, Firefox 12, Safari 6, or Chrome 202 or higher
Reset Button
version with Java installed and enabled
• Reset to factory default
Networking Protocol
Video Codecs
• H.264
• DHCP Client
• NTP Client (D-Link)
• JPEG for still images
• DNS Client
Video Features
• DDNS Client (Dyndns and D-Link)
• Adjustable image size and quality
• SMTP Client
• Time stamp and text overlay
• FTP Client
• Flip and mirror
• HTTP Server
• Resolution
• 1280 x 720 (default)
• UPnP Port Forwarding
• 640 x 480
• 320 x 240 at frame rates up to 30 fps
Built-In Protocol
• 10/100 BASE-T Fast Ethernet
• Fixed length: 2.38 mm, Aperture: F2.2
• 802.11n/g/b WLAN
Wireless Connectivity
• 1/4” 720P progressive CMOS sensor
• 802.11n/g/b Wireless with WEP/WPA/WPA2 security
• 0 lux with IR LEDs on
1 Edge browser is not supported.
2 mydlink Portal only.
D-Link DCS-5030L User Manual

Appendix A - Technical Specifications
Minimum Illumination
Max Power Consumption
• Color: 1 lux @ F2.0 (Day)
• 5.56 W
• B/W: 0 lux @ F2.0 (Night)
Operation Temperature
Viewing Angle
• 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
• Horizontal: 94.36°
Storage Temperature
• Vertical: 59.3°
• -25 ˚C to 70 ˚C (-13 ˚F to 158 ˚F)
• Diagonal: 110.44°
Operation Humidity
Pan/Tilt Range
• 20 to 85% RH non-condensing
• Pan Range: +170° ~ -170° (total 340°)
Storage Humidity
• Tilt Range: +90° ~ -20° (total 110°)
• 5 to 95% RH non-condensing
Digital Zoom
Emission (EMI), Safety & Other Certifications
• Up to 4x
• FCC Class B
3A Control
• IC
• AGC (Auto Gain Control)
• C-Tick
• AWB (Auto White Balance)
• CE
• AES (Auto Electronic Shutter)
• Input: 100-240 V AC, 50/60 Hz
• Output: 5 V DC 1.5 A, 50/60 Hz
Dimensions (W x D x H)
• Camera Only - 116.4 x 109.1 x 133.6 mm (4.58 x 4.29 x 5.26 inches)
• Camera Including Mounting Bracket - 116.4 x 109.1 x 230.0 mm
(4.58 x 4.29 x 9.06 inches)
• Device: 292.4 grams (0.64 lbs)
• Stand: 60.8 grams (0.13 lbs)
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Regulatory Statements
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in
the USA must be fixed to USA operational channels only.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Industry Canada Statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le
(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies with the e.i.r.p. limit;
(ii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à
5350MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e;
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
NCC 警語:
本模組於取得認證後將依規定於模組本體標示審驗合格標籤系統廠商應於平台上標示「本產品內含射頻模 組:
電磁波曝露量MPE標準值(MPE) 1 mW/cm2,送測產品實值為 0 mW/cm2
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
European Union:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer to the Declaration of
Notice of Wireless Radio LAN Usage in The European Community:
• At the time of writing this addendum, some countries such as Italy, Greece, Portugal, and Spain have not allowed operation of radio devices
in the 5 GHz bands, although operation of 2.4 GHz radio devices is allowed. Please check with your local authority to confirm.
• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the
potential for interference.
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in
France where restrictive use applies. This device may not be used for setting up outdoor radio links in France and in some areas the RF output
power may be limited to 10 mW EIRP in the frequency range of 2454 –2483.5 MHz. For detailed information the end-user should contact the
national spectrum authority in France.
This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, OL, PT, RO, SM, SE, RS, SK,
Usage Notes:
• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the
products according to the country where the equipment will be deployed.
• This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication
between two client devices without an Access Point.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in
5 GHz within the EU.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
2.4 GHz Wireless Frequency and Channel Operation in EEC Countries:
Frequency Band
Max output power (EIRP)
2400 - 2454 MHz
100 mW
Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte
2454 - 2483.5 MHz
100 mW indoor, 10 mW outdoor
Reunion et Guyane
2400 - 2483.5 MHz
100 mW
Rest of EU community
2420 - 2483.5 MHz
100 mW
R&TTE 1999/5/EC
WLAN 2.4 - 2.4835 GHz
IEEE 802.11b/g/n
Spectrum Regulation
MHz, Europa (ETSI)
max. EIRP Innenbereich
max. EIRP Außenbereich
2400 - 2483.5 MHz
100 mW
100 mW
2400 - 2454 MHz
100 mW
100 mW
2454 - 2483.5 MHz
100 mW
10 mW
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
European Community Declaration of Conformity:
Česky [Czech]
D-Link tímto prohlašuje, že tento <###> je ve shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede D-Link erklærer herved, at følgende udstyr <###> overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt D-Link, dass sich das Gerät <###> in Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab D-Link seadme <###>vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
D-Link hereby, declares that this <###> is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente D-Link declara que el <###> cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
Français [French]
Par la présente D-Link déclare que l'appareil <###> est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente D-Link dichiara che questo <###> è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo D-Link deklarē, ka <###> atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
Lietuvių [Lithuanian]
Šiuo D-Link deklaruoja, kad šis <###> atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart D-Link dat het toestel <###> in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, D-Link, jiddikjara li dan <###> jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, D-Link nyilatkozom, hogy a <###> megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Polski [Polish]
Niniejszym D-Link oświadcza, że <###> jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
D-Link declara que este <###> está conforme com os requisitos essenciais e outras disposições da Directiva
Slovensko [Slovenian]
D-Link izjavlja, da je ta <###> v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
D-Link týmto vyhlasuje, že <###> spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
D-Link vakuuttaa täten että <###> tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Warning Statement:
The power outlet should be near the device and easily accessible.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Safety Instructions
Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. Any
acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by D-Link
may result in the loss of product warranty.
Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:
• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from the device or
from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited by local law.
• Modify or alter the device.
• Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following precautions:
Power Sources
• Observe and follow service markings.
• Do not push any objects into the openings of your device unless consistent with the authorized operation of the device. Doing so can cause
a fire or an electrical shock by shorting out interior components.
• The powering of this device must adhere to the power specifications indicated for this product.
• Do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical shock.
• Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for stacking).
• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests
on any cables.
• Operate the device only from the type of external power source indicated on the electrical ratings label.
• To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match the power
available at your location.
• Also be sure that attached devices are electrically rated to operate with the power available in your location.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
• Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option intended for
your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. The power cable must
be rated for the device and for the voltage and current marked on the device's electrical ratings label. The voltage and current rating of the
cable should be greater than the ratings marked on the device.
• To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable.
If you must use an extension cable, use a 3-wire cable with properly grounded plugs.
• Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension cable or
power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
• To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or
uninterruptible power supply (UPS).
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local/
national wiring rules.
• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following guidelines.
• Install the power supply before connecting the power cable to the power supply.
• Unplug the power cable before removing the power supply.
• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies.
• Do not service any product except as expressly set forth in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical shock. Only a
trained service technician should service components inside these compartments.
• To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-replaceable; therefore, there is no
reason to access the interior.
• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the
appropriate section in your troubleshooting guide or contact your trained service provider.
• Use the device only with approved equipment.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops and uneven
• Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).
• Do not use this device in areas with high humidity.
• This device must not be subjected to water or condensation.
• Keep your device away from radiators and heat sources. Also, do not block cooling vents.
• Always unplug the power before cleaning this device.
• Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices.
• Use a dry cloth for cleaning.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before
you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on
the chassis.
You can also take the following steps to help prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing
material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge
static electricity from your body.
2. When transporting a sensitive component, first place it in an antistatic container or packaging.
3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding
This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national
disposal and recycling regulations. For more information, please refer to the warranty guide.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Disposing of and Recycling Your Product

This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help
to conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpflichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende Informationen im Internet
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le
Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al fin de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden
weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de
levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten,
sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze
manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken,
ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in
product en verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen
hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony
károsanyag-tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a weboldalon tudhat meg.
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som
husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta
D-Link DCS-5030L User Manual

Appendix B - Regulatory Information
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite
D-Link DCS-5030L User Manual

Document Outline