CD with Manual and Drivers DO NOT insert the DGE-530T into the computerâ€™s PCI slot before installing the drivers.
Installing the DGE-530T Drivers A. Insert the driver CD,which is included with the DGE-530T, into the CD-ROM of your
computer. B. Choose the preferred language and click on â€śInstall Driversâ€ť. When prompted â€śInstallation
Completeâ€ť, click OK. If prompted to restart (for Microsoft Windows 98/ME only), click â€śYesâ€ť. Installing the DGE-530T into the computerâ€™s PCI slot
Next, TURN OFF the com
puter and unplug the power cord.
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DGE-530T Ethernet Adapter.
A. Power off your computer and disconnect the power cord. B. Remove the back cover of your computer. (Refer to your computerâ€™s manual if needed.) C. Locate an available PCI slot. PCI slots are usually white or cream coloured. D. Remove the back plate (the small piece of metal that covers the opening for the PCI card
on the back cover that you just removed.) E. Insert the DGE-530TXcarefully and firmly into the PCI slot.
F. Secure the DGE-530T with the screw from the back plate. G. Replace your computerâ€™s cover. Finishing the Installation A. Reconnect the power cord and power onthe computer. B. Windows should automatically detect and install the adapter. C. If prompted to restart (for Microsoft Windows 98/ME only), click â€śYesâ€ť. Troubleshooting 1. If Iâ€™ve lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see Technical Support below). Windows 2000 or XP in most cases will automatically install the correct drivers. 2. What do I do if the installed card does not seem to function properly?
ď‚· Check that the card appears under
START>CONTROLPANEL>SYSTEM>HARDWARE >DEVICE MANAGER>NETWORK ADAPTERS.
ď‚· If it does not appear, make sure you have inserted
the PCI card correctly or try inserting the card into an alternative PCI slot.
ď‚· If it appears with an error â€ś!â€ť or â€ś?â€ť, remove or
uninstall the device by right clicking on the device. Restart the computer, upon restart Windows will redetect it. If error persists, try removing the card and uninstalling the driver. Repeat the installation process.
D-Linkâ€™s website contains the latest user documentation and software updates for D-Link products.
Canadian customers can contact D-Link Technical Support through our website or by phone.
English: Twenty four hours a day, seven days a week
FranĂ§ais: Lundi - Vendredi,12h - 21h
World Wide Web