This product can be set up using DI-634M
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Wireless Router Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. ItÔÇÖs best to use the same computer that is connected to your modem for con´Čüguring
the DI-634M 108G MIMO Wireless Router. The DI-634M acts as a DHCP server and
will assign all the necessary IP address information on your network. See Appendix at the end of this Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address. Check Your Package Contents DI-634M 108G MIMO Wireless Router CD-ROM (containing Manual and Warranty) Ethernet (CAT5 UTP/Straight Through) Cable
Using a power supply with 5V DC Power Adapter a different voltage rating will
damage and void the warranty
of this product.
If any of the above items are missing, please contact your reseller.
┬ę2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
speci´Čücations subject to change without notice. DI-634M. 12302004 1
Connecting The DI-634M Wireless Router To Your Network A. First, connect the power adapter to the receptor at the back panel of the
DI-634M and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn ON to indicate proper operation. B. 1. Power off your Cable or DSL modem; some devices may not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-634M should
be powered on and the Cable / DSL modem should be turned off.
2. Cable / DSL modem (Power Off) ÔÇô DI-634M (Power On)
Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem.
After the Ethernet cable is securely connected, power on the Cable / DSL modem
by turning on the unit or plugging in the power adapter.
3. Cable / DSL modem (Power On) ÔÇô DI-634M (Power On)
Insert the other end of the Ethernet cable to the WAN PORT on the back panel of
the DI-634M. The WAN LED light will illuminate to indicate proper connection. If the
WAN LED is not illuminated, please go back to step B1 and repeat the instructions. C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-634M and
an available Ethernet port on the network adapter in the computer you will use
to con´Čügure the DI-634M. The LED light for LAN Port 1 will illuminate to indicate
proper connection. (Note: The LAN Ports on the DI-634M are Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover Ethernet cable to the LAN
Ports.) D. Computers equipped with 802.11g wireless adapters will be able to connect to the
DI-634M. The DWL-G650M 108G MIMO Wireless Cardbus Adapter and the DWL-
G520 AirPlus Xtreme G Wireless PCI Adapter will be able to connect out of the box
with the router using their default wireless settings. D. Antennas
Used to C. LAN PORTS
These are the B. WAN PORT
connections for Ethernet
This is for the connection
cables to Ethernet
of an Ethernet cable to the
Cable or DSL modem
adapters. Reset Button A. Receptor for
Pressing this button restores the Router to its original Power Adapter.
factory default settings. 2
Restart Your Computer Connecting Additional Computers To The DI-634M
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers
to the remaining Ethernet LAN ports on the back panel of the DI-634M. Power LED ÔÇô a solid
light indicates a proper
connection to the power WLAN LED ÔÇô a solid light
indicates that the wireless
segment is ready. This LED
blinks during wireless data WAN LED ÔÇô a solid light
indicates connection on the
WAN port. This LED blinks
during data transmission. LOCAL NETWORK LEDs ÔÇô a solid light Status LED ÔÇô a blinking light
on the port indicates a connection to an
indicates that the DI-624 is
Ethernet enabled computer on ports 1-4.
This LED blinks during data transmission.
When you have completed the steps in this Quick Installation Guide, your connected
network should look similar to this: 3
Using The Setup Wizard Open your Web browser and
type ÔÇťhttp://192.168.0.1ÔÇŁ into the
URL address box. Then press the Enter or Return key.
The logon pop-up screen will appear. TypeÔÇťadminÔÇŁ for the username and
leave the password ´Čüeld blank. ClickOK
Once you have logged in, the Home screen will appear. ClickRun Wizard 4
The Setup Wizard (continued)
You will see the following screens ClickNext Set up your new password.
You have the option to establish
a password. ClickNext Choose your time zone from
the drop down list. ClickNext 5
The Setup Wizard (continued)
A this point, the setup wizard will try
to auto-detect your Internet connec-
tion type. If you have a Dynamic
or PPPoE connection, you will be
brought to the corresponding page.
Otherwise, you will see the following screen: Select your Internet Connection.
You will be prompted to select the
type of Internet connection for your
If you are unsure of which setting
to select, please contact your Internet
Service Provider. ClickNext
If you selected Dynamic IP Ad- dress, this screen will appear:
(Used mainly for Cable Internet
service.) Click the ÔÇťClone MAC AddressÔÇŁ
button to automatically copy the
MAC address of the network adapt-
er in your computer. You can also
manually type in the MAC address.
This setup should be done on
the computer that is registered
on the ISPÔÇÖs network. ClickNext
Please continue to Wireless Setup. 6
The Setup Wizard (continued)
If your ISP requires a Static IP Address, and this option is
selected, then this screen will
Enter the IP address information
originally provided to you by your
ISP. You will need to complete all
the required ´Čüelds. ClickNext
Please continue to Wireless Setup.
If your ISP uses PPPoE (Point-to-
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear: (Used mainly
for DSL Internet service.)
Enter in the username and pass-
word provided to you by your ISP.
Please be sure to remove any
existing PPPoE client software
installed on your computers. ClickNext
Please continue to Wireless Setup. 7
The Setup Wizard (continued) Wireless Setup The default wireless settings for
your 802.11g wireless network are:
SSID = default
Channel = 6
You can change these settings to
match an existing wireless network. ClickNext
If you wish to use encryption for
your 802.11g network, the DI-634M
is capable of two levels of wire-
less encryption - 64-bit and 128-
bit. By default the encryption is disabled. You can change the
encryption settings for more secure
wireless communication. ClickNext 8
Your Setup is Complete! ClickRestart ClickClose Test Internet Connection
You will be returned to the Home tab. Close the web browser window and relaunch
your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favor-
ite Web site to test your Internet connection.
For additional settings or information, refer to the Advanced, Tools, or Status tabson
the web-management interface; or to the Manual located on the CD. 9
APPENDIX (continued) To connect to the network, make sure the
network adapter in your computer is con´Čügured
properly. HereÔÇÖs how to con´Čügure the network
adapter to obtain an IP address automatically
for the DI-634M Wireless Broadband Router.
For Microsoft Windows XP: Go to Start
> right click on My Network Places >
select Properties > Right click on the Network Connection associated with the
Ethernet adapter and select Properties
(i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Obtain an IP address automatically Click OK Restart your computer (if necessary) 10
For Apple Macintosh OS X:
Go to the Apple Menu Click on System Preferences and Select Network Click on Network Select Built-in Ethernet in the Show pull down menu Select Using DHCP in the Con´Čügure pull down menu Click on Apply Now
The IP address information,
the Subnet Mask, the RouterÔÇÖs
IP address and the Ethernet
adapter address will appear 11
You can ´Čünd software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link technical support through our
website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone:
24 hours a day, seven days a week. D-Link Technical Support over the Internet:
email:email@example.com Tech Support for customers within Canada: D-Link Technical Support over the Telephone:
Monday to Friday 7:30am to 12:00am EST D-Link Technical Support over the Internet: