Version 1.20 | 04/01/2015
User Manual
mydlink Camera Video Recorder

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and
Manual Revisions
March 13, 2015
Revision A2 with firmware version 2.00
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2015 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
D-Link DNR-202L User Manual

Table of Contents
Table of Contents
Product Overview ..............................................................4
Configuration ...................................................................32
Package Contents ......................................................................... 4
Using the Configuration Interface ........................................32
Introduction ................................................................................... 5
Live Video ..............................................................................33
System Requirements ................................................................. 5
Playback .................................................................................37
Features ............................................................................................ 6
Setup Wizard ................................................................................43
Hardware Overview ..................................................................... 7
Setup ...............................................................................................46
Network Setup .....................................................................46
Assembly and Installation ................................................8
Audio and Video ..................................................................47
Attaching External Drives .......................................................... 8
Recording Schedule ...........................................................48
Installation and Setup ................................................................. 9
E-mail Settings .....................................................................49
HDD Viewer Software Installation ........................................15
Event Settings ......................................................................50
HDD Viewer Software Interface .............................................16
Log ...........................................................................................51
View Recording ....................................................................17
Maintenance ................................................................................52
mydlink Portal .................................................................18
Display and Language ......................................................52
User Account ........................................................................53
NVR Status Icons .........................................................................19
System ....................................................................................54
Settings ..........................................................................................20
Time and Date ......................................................................55
Live Video ......................................................................................21
Firmware Upgrade ..............................................................56
Playback .........................................................................................22
Hard Drive .............................................................................57
View Recording ...........................................................................23
Camera Search .............................................................................58
Status ..............................................................................................24
Help .................................................................................................60
NVR Info .........................................................................................25
mydlink View - NVR App...........................................................26
LED and Buzzer Overview ...............................................61
First Use - Select Your Device .................................................27
Live View ........................................................................................27

Technical Specifications ..................................................62
Video Playback ............................................................................30
Video Playback Control ............................................................31
Regulatory Information ..................................................64
D-Link DNR-202L User Manual

Section 1 - Product Overview
Product Overview
Package Contents
DNR-202L mydlink Camera Video Recorder
Power adapter
CAT5 Ethernet cable
Quick Installation Guide
CD-ROM with User Manual and software
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty
for this product.
D-Link DNR-202L User Manual

Section 1 - Product Overview
Congratulations on your purchase of the DNR-202L mydlink™ Camera Video Recorder.
The DNR-202L is a wired Network Video Recorder (NVR) that supports up to four network cameras with M-JPEG, MPEG4, or
H.264 recording with up to two attached USB hard drives. Thanks to the powerful embedded system, the NVR can record video
from network cameras located in local or remote sites to dedicated disk storage without needing a PC.

Powered by mydlink technology, the DNR-202L can be easily setup for Internet access. It supports real-time monitoring and
playback from anywhere via an Internet browser. Users can simultaneously record while viewing live feeds or while searching
recordings for playback. Complete video management, live surveillance, and playback ability makes the DNR-202L a convenient
and stable video recording solution.
System Requirements
• Computer with Microsoft Windows 8®, Windows 7, Vista®, XP, or Mac OS 10.7 or above
• PC with Pentium 4 – 2.4 GHz or above, at least 512 MB RAM
• Internet Explorer 8 and above, Firefox, Chrome, Safari 5 or above
• Existing 10/100 Ethernet-based network
• Broadband Internet connection
D-Link DNR-202L User Manual

Section 1 - Product Overview
Comprehensive IP Surveillance Solution
Total Solution: The D-Link DNR- 202L is a Network Video Recorder (NVR) capable of 24/7 recording without requiring a PC. The
DNR-202L can manage multiple network cameras, provide direct access to view live video and play recorded video files through
the Internet from anywhere, anytime. The device itself is lightweight and compact in size for maximum portability.
Easy to Use: A user-friendly GUI simplifies network and camera setup, allowing users to easily access multiple cameras for
viewing, recording, playback, and configuration.
Centralized Interface for Configuration: The DNR-202L provides a flexible and economic alternative to manage and configure
multiple network cameras on a centralized web interface.
Megapixel Resolution Support: The major advantage of digital over analog video is its higher resolution support. The
DNR-202L supports high resolution megapixel recording for vivid video with high clarity.
Empowered by mydlink Technology: The DNR-202L can be easily setup for Internet access. It supports real-time monitoring
and playback from anywhere via an Internet browser.
Powerful Event Management
Flexible Event Management: Event setup is another key feature of the DNR-202L. The NVR can monitor your cameras for motion
detection, digital input, and connection status events to trigger an action.
Event Notification: One of the most powerful functions is the notification application. The NVR centrally controls the e-mail
notifications and can even activate a buzzer function from supported cameras.
Instant Live View
Full Screen: Enlarge the display to full screen of live view and recorded video.
Camera Name and Status on OSD: The camera status page will show the connection, recording, frame rate, and bit rate
information of each camera. Meanwhile, the time and date are also displayed for quick reference.
PTZ/Audio Support: Users can control Pan/Tilt/Zoom (PTZ) functions from within the interface using the provided interface
Preset Point: Presets from within the interface can be set to instantly restore a previously saved viewpoint.
Digital Zoom: Videos can be enlarged by using digital zoom.
Intelligent Playback
AVI Output: During playback, if you uncover video that needs to be exported, you can easily export video in the convenient
AVI format.
Playback Speed Control: Speed control allows for up to 32x speed fast forward or fast rewind playback. The step playback
option displays one frame at a time.
Instant Snapshot: Take an instant still image of the video frame during playback.
Print Picture: If a printer is connected to the user’s PC, the NVR can also print the selected still image.
D-Link DNR-202L User Manual

Section 1 - Product Overview
Hardware Overview
Right View
Rear View
Power Receptor
Connect the provided power adapter
Ethernet Port
Connect one end of the provided network cable
USB Port for HDD 1
Attach an external USB Hard Disk Drive (HDD) to this port to save recorded
HDD 1 Button
Press this button to release the HDD attached to the USB Port for HDD 1
USB Port for HDD 2
Attach an external USB HDD to this port to save recorded streams
HDD 2 Button
Press this button to release the HDD attached to the USB Port for HDD 2
Auto Scan Button
Press this button to automatically scan for cameras on the network
Reset Button
Press and hold the recessed button for 10 seconds to reset the device to factory
default settings
D-Link DNR-202L User Manual

Section 2 - Installation
Assembly and Installation
Attaching External Drives
Step 1
Place the NVR on a non-slip flat surface.
Step 2
Attach an external USB HDD to the USB HDD1 port.
The NVR will mount the HDD and beep once.
Note: When you want to remove an HDD, press and hold the release button for
at least three seconds. The NVR will release the HDD and emit a long beep. You
can now unplug the USB cable.
Step 3
Attach one end of the provided RJ45 network cable to the NVR. Attach the other
end to your network. The DNR-202L will test for an Internet connection. Once an
Internet connection is established, the blue LED will blink.
Note: If you do not connect an Ethernet cable, the DNR-202L will beep.
Step 4
Attach the provided power adapter.
D-Link DNR-202L User Manual

Section 2 - Installation
Installation and Setup
Step 1
Insert the Installation CD-ROM into your computer’s optical drive to start the
autorun program. Click Start to begin the wizard.
Windows Users:
The CD-ROM will open the Setup Wizard. The Setup Wizard will guide you through
the installation process to configure the NVR.
If the autorun program does not automatically start on your computer, go to
Windows and click Start > Run. In the Run command box type D:\autorun.exe,
where D: represents your CD-ROM drive.
OS X Users:
Insert the DNR-202L Driver CD in the CD -ROM drive. After you have inserted the
CD into your computer, go to the CD drive directory, and double-click the Mac
Utility folder to enter.
Step 2
Connect your USB hard drive to the DNR-202L and click Next to proceed.
D-Link DNR-202L User Manual

Section 2 - Installation
Step 3
Connect the power adapter to the DNR-202L and then to a power outlet.
Click Next to continue.
Step 4
Connect an Ethernet cable from your router's LAN port to the DNR-202L.
Click Next to continue.
D-Link DNR-202L User Manual

Section 2 - Installation
Step 5
Make sure the LED on the NVR is lit blue then click Next to continue.
Step 6
The wizard will attempt to find your NVR in your network. You can click Rescan
to search for the DNR-202L at any time.
Click Next to continue.
D-Link DNR-202L User Manual

Section 2 - Installation
Step 7
Once your NVR has been found, you can set a password for it in the text boxes.
Click Next to continue.
Step 8
You must format the attached hard drives for the NVR. Make sure you do not have
any important data on this drive before clicking Next.
Click OK to proceed with formatting.
D-Link DNR-202L User Manual

Section 2 - Installation
Step 9
The wizard will scan for all available cameras attached to your network. Registered
mydlink cameras will be verified automatically.
You can preview the discovered cameras by clicking on the blue camera icon, or
click Next to continue.
Step 10
A pop-up will ask you to enter the password for your camera.
Click OK.
The checkbox next to your camera will now have a green checkmark to indicate
it has been added successfully.
Click Next to continue.
Note: It is strongly advised to set up passwords for all of your cameras.
D-Link DNR-202L User Manual

Section 2 - Installation
Step 11
The wizard will guide you through the process of connecting your NVR to a mydlink
account. If you already have a mydlink account, enter the correct configuration
information and click Next to continue, otherwise select I want to sign up for a
new account or I don't want to use mydlink service and fol ow the instructions.
Click Next to continue.
Step 12
Setup is complete. Make a note of the details presented and click on Go to NVR
to log in to the NVR for further configuration (see "Using the Configuration
Interface" on page 32) or click Finish.
To add cameras after initial setup, refer to "Camera Search" on page 58.
D-Link DNR-202L User Manual

Section 2 - Installation
HDD Viewer Software Installation
Your DNR-202L comes with a convenient application to assist you in managing your recorded video. This section will guide
you through the simple setup procedure, and the interface of the application.
Step 1
Attach the hard drive containing the DNR-202L recordings you wish to view.
Step 2
Insert the DNR-202L Driver CD in the CD-ROM drive. Navigate to the D:\HddViewer
folder (where D: represents the drive letter of your CD-ROM drive) and double
click on the setup program to begin the installation.
Step 3
Follow the on-screen prompts and click Finish to complete the installation.
D-Link DNR-202L User Manual

Section 2 - Installation
HDD Viewer Software Interface
The HDD-Viewer application enables you to view, search and, backup your recorded videos from a simple interface. The interface controls are
described below. For advanced users refer to "Playback" on page 37 for more details.
Open Recording
Use this button to show the Open Recording menu.
Search Menu
See "View Recording" on page 17 for more.
Display Single feed Use this button to switch to a single camera feed in
the live video display area.
Display 2 x 2 feed
Use this button to switch to a 2 x 2 camera feed in
the live video display area.
Actual Size
Use this button to display the recording in it's native
Full Screen
Use this button to switch to a full screen view of the
live video feed.
On Screen Display
Use this button to configure the various settings for
the on screen display.
Save as AVI
Use this button to export the video as an AVI file.
Print Image
Use option this to print a still image.
Save as Image
Use this option to save a still image.
Use this option to apply image enhancements.
Backup Data

Use this option to make a backup your video
Use the slider to adjust the playback volume.
Close Application
Use this button to close the application.
Use this button to minimize the application.
D-Link DNR-202L User Manual

Section 2 - Installation
View Recording
Click a highlighted date on the calendar to access the Date-Time Panel and select the video recordings which you would like
to review.
Select Folder
Use this button to navigate to your video recordings folder. Recordings
are stored under the "avdata" folder on your HDD.
Date Selection Area
Select the year, month, and day of the recording you wish to view. Dates
with recordings available for playback are highlighted in blue.
Time Range Selection
Select a beginning and end time for the recording you wish to view.
Video Preview
When Enable Preview is checked, this area will display a preview.
This timeline will adjust according to the level of zoom selected.
Available Streams
This area lists the recording devices available.
Zoom Slider
Use the zoom slider control to zoom in and out of the timeline.
Available Recordings
Recordings are graphed below the timeline. Blue bars indicate an event
was recorded. Red bars indicate the camera is set to always record.
Selected Period
Click within the timeline to select a recording period.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
mydlink Portal
After registering your NVR with a mydlink account in the NVR Setup Wizard, you
will be able to remotely access your NVR from the website.
After you log in to your mydlink account, you will be taken to the My Devices page.
To connect to your NVR click on the Connect button and provide your password
to complete the login process. After you have connected to the NVR, you will be
taken to the Live Video page. (Refer to "Live Video" on page 21)
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
NVR Status Icons
Here, you can see the online status of each of your NVRs. Your online status may be one of the following:
A green checkmark indicates that your NVR is online and ready to use.
A yellow exclamation point indicates that your NVR is online, but the NVR
password has changed. You will need to enter your new NVR password to
access your NVR again.
A red cross indicates that your NVR is offline and currently cannot be
accessed remotely.
If your NVR is offline, try the following:
• Check to make sure that the Internet connection to your NVR is working properly.
• Try restarting your Internet router.
• Check your NVR’s cable connections and make sure they are secure.
• Check to make sure that the LED on your NVR is lit solid blue.
If you still cannot access your NVR, reset your NVR and run the NVR Setup Wizard again from the CD-ROM included in your
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
On the Settings tab you can see a general summary of your NVR.
If you wish to remove your NVR from your mydlink account click on the Delete NVR button and provide your password to
complete the action.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
Live Video
After you have connected to your NVR, the Live Video tab will be selected by
default and will display the Live Video feed. You can choose a different camera
from the drop-down list, or you can choose to view all the available channels.
A notice is displayed below the controls if any events have been recorded, or if
the NVR is currently recording.
The available controls are detailed below.
Control Pad
This control pad can be used to pan, tilt, and zoom
(PTZ) a dome camera, or electronically pan, tilt, and
zoom (PTZ) within the camera's predefined view area, if
one has been defined.
Zoom Control
Use the + and - buttons to zoom in or out.
Actual Size
Use this control to view video in it's native resolution.
Use this control to toggle recording.
Save to Image
Use this option to save a snapshot image.
Auto Scan
Use this option to view each camera feed one at a time.
Select the camera you wish to view from the drop-
down list.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
The Playback tab enables the user to review pre-recorded video. The available
playback controls are detailed below.
Playback Seeker
Use the playback seeker to quickly jump to a specific
point in the recording.
Volume Control
Adjust the slider to increase or decrease the audio
Open Recording
Click on this control to open the saved recordings
search dialog. See "View Recording" on page 17.
Pause Playback
Use this control to pause the current playback.
Stop Playback
Use this control to stop the current playback.
Step Back/Forward
Use these controls to pause playback and either step
back one frame or advance forward by one frame.
Speed Down/Up
Use these controls to slow down or speed up the
Zoom Control
Use the + and - buttons to zoom in or out.
Actual Size
Use this control to view video in it's native resolution.
Save to Image
Use this option to save a snapshot image.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
View Recording
Click a highlighted date in the calendar to access the Date-Time Panel and select the video recordings which you would like
to review.
Date Selection Area
Select the year, month and day of the recording you wish to view. Dates
with recordings available for playback are highlighted blue.
Time Range Selection
Select a beginning and end time for the recording you wish to view.
Video Preview
When Enable Preview is checked, this area will display a preview.
This timeline will adjust according to the level of zoom selected.
Available Streams
This area lists the recording devices available.
Zoom Slider
Use the zoom slider control to zoom in and out of the timeline.
Available Recordings
Recordings are graphed below the timeline. Blue bars indicate an event
was recorded. Red bars indicate the camera is set to always record.
Selected Period
Click within the timeline to select a recording period.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
The Status tab describes both USB storage and cameras connected to the NVR.
Name: This shows the name given to the USB storage device attached to the USB 1 or USB 2
Total Hard Drive Capacity: This shows the total amount of storage space available on the
USB storage device attached to the USB 1 or USB 2 Port.
Used Space: This shows the used storage space of the USB storage device attached to the
USB 1 or USB 2 Port.
Unused Space: This shows the amount of space available for recording on the USB storage
device attached to the USB 1 or USB 2 Port.
Status: This shows if the USB storage device attached to the USB 1 or USB 2 port is currently
being recorded to.
Camera Status: Clicking on the Camera Status button allows you to access your individual
cameras' status information.
D-Link DNR-202L User Manual

Section 3 - mydlink Portal
NVR Info
The NVR Info tab shows you various information about your NVR.
NVR Name: The Device Name is a unique name that can help you to identify the NVR. Clicking
on the Device Name will open a window for you to login to your NVR’s configuration interface.
mydlink No.: Displays the mydlink number of your device.
Model Name: Displays the model name of your device.
MAC Address: Displays the MAC address of your device.
NVR activated on: Displays the time and date that your device was added to mydlink.
Advanced Settings: Clicking on the Advanced Settings button allows you to access your
NVR’s configuration interface. To open your NVR’s configuration interface, select the NVR web
page and enter the password.
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
mydlink View - NVR App
Search for “mydlink View - NVR ” to download and install the app on your smartphone or tablet when connected to the Internet.
mydlink View - NVR app requires: iOS version 5.1.1 or above or Android version 4.01 or above.
Once the download has been completed, launch the “mydlink View - NVR” app and log in to your mydlink account. Select your
DNR-202L from the device list to access the live video from the connected cameras.
Now you can remotely access the live video, playback recorded videos, and manually enable or disable recording.
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
First Use - Select Your Device
Before using the mydlink View - NVR app for the first time, please ensure to add
your DNR-202L to your mydlink account first.
After starting the mydlink View - NVR app, your DNR-202L will be displayed in the
My Device list. The app will connect to your DNR-202L, and you can then view
live video and playback from your recordings archive via your device.
Live View
Tap on the DNR-202L icon and the mydlink View-NVR will access the Live video
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
iPhone/iPod touch Grid View
On an iPhone or an iPod touch, mydlink View-NVR can display the Device List of
your mydlink account on the main screen. Tap on your DNR-202L to enter the
4-grid view.
iPad Grid View
On an iPad, mydlink View-NVR can expand and shrink the Device List of your
mydlink account at the left-hand side of the panel. Tap on your DNR-202L to enter
the live video view. Double-tap on one of the channels to start a single-channel
live video. Double-tap again to return back to the grid view.
Channel selection
• In single channel mode, users can swipe through the video channels to see the
previous or the next video channel of the cameras connected to the DNR-202L.
• Double-tap on one of the channels to select a single-channel live video stream.
• Tap on the “My Device” button to return to the Device List of your mydlink
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
Pan Tilt Zoom (PTZ)
To access PTZ controls, use a two finger tap while streaming a single channel
video stream and the PTZ control panel will appear.

Use a two finger tap on the video stream again to disable the PTZ control panel.
Pan Tilt Control Tap on the directional arrows to Pan and Tilt the camera
Zoom Control
Tap the plus or minus button to zoom the camera focus in or out
Note: The PTZ control function must be enabled on the camera connected to the
DNR-202L in order for mydlink View-NVR to control the PTZ function.
See "Live Video" on page 33 for more information.
Video Stretch
In live view or playback archive mode, you can tap on the video stretch button
( )to stretch the video to full screen. Tap the button again to disable stretch.
Note: This function may alter the aspect ratio of the video stream.
While streaming a single channel, tap the Snapshot button (
)to capture a
snapshot. The image will be saved to the device's picture storage area.
While viewing video in grid view, tap the Snapshot button (
) to take snapshots
of all the channels. The images will be saved to the device's camera roll.
Note: The saved snapshot wil be at the original resolution of the IP camera video.
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
While streaming a single-channel video, tap the e-mail button ( ) to capture a
snapshot and insert it into an e-mail. Complete the To, Cc/Bcc fields as required
and click Send to send the e-mail with snapshot attached or click Cancel to
cancel the operation.
While viewing in grid view, tap the e-mail button ( ) to capture a snapshot of all
the channels and insert all the snapshots into a single e-mail. Complete the To,
Cc/Bcc fields as required and tap Send to send the e-mail with snapshot attached
or tap Cancel to cancel the operation.
Video Playback
The video playback function is only available in single view mode. Tap the open
recording button (
) while in single channel mode to bring up the playback
selection panel.
Use the playback selection panel to scroll through your video recordings archive.
Scroll to the date and time you wish to playback, and tap Play.
D-Link DNR-202L User Manual

Section 4 - mydlink View-NVR
Video Playback Control
While the video recording is playing in single view mode, tap the playback control
button (
) to control the direction of the video playback.
The control buttons are:
• Step backward for 1 Second (
• Play/pause toggle (
• Step forward for 1 Second ( )
Use the speed panel (
) to control the speed of video playback from
x1 through to x32 speed.
Note: The quality of display performance will vary according to network
bandwidth availability.
D-Link DNR-202L User Manual

Section 5 - Configuration
Using the Configuration Interface
After completing the Setup Wizard, you are ready to use your NVR. The NVR's built-in web configuration utility is designed to
allow you to easily access and configure your DNR-202L. At the end of the wizard, click Go to NVR, or enter the IP address of
your NVR into a web browser, such as Internet Explorer. To log in, use the username admin and the password you created in
the Setup Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Step 1
Click Go to NVR to continue to the NVR web configuration page.
Step 2
Enter your NVR credentials to access the configuration interface.
D-Link DNR-202L User Manual

Section 5 - Configuration
Live Video
This section shows the NVR's live video feeds. You may select any of the available icons listed below to operate the camera.
7 8 9 10
11 12
Click this icon to start the NVR Setup Wizard.
This takes you to the advanced settings page where you can manually customize your
NVR's network, camera, schedule, events, and maintenance settings.
Camera Search
This takes you the camera settings page, where you can add cameras and customize
your camera settings.
This takes you to the help section in the UI.
Channel Windows
You can drag to reposition camera streams or double-click to view one stream. The
selected video stream will be marked with a red border.
Viewing Modes
Switch between viewing a single camera feed or four camera feeds.
D-Link DNR-202L User Manual

Section 5 - Configuration
Full Screen
Select to display the video on full screen. Press the ESC button on the keyboard to return
to normal view.
Auto Scan
Activate auto scan to cycle through the channels/cameras on the display.
Actual Size
Switch the video to the actual size or fill the window.
Display the information on the video.
Click this icon to take a snapshot of the active stream.
Manual Record
Click to enable or disable recording manually.
Click to enable or disable audio from the selected camera's microphone (if camera
supports audio). When enabled, you can adjust the volume via the slider.
Switch between the Live View and the Playback pages.
Log In/Out
Click this to log in or out of the NVR.
Info Sections
This section contains various detailed information about the NVR. You can collapse or
restore each section for viewing by clicking on the title bar.
Notes:• Snapshot: Right-click on the video and select the snapshot function to capture an image immediately.
• Right-clicking on the video will show the option to Switch to Full Screen. Press the ESC button on the keyboard to return
to normal view.
• Swap: Right-click on the video and select a channel under Swap to display a different video channel in that window.
D-Link DNR-202L User Manual

Section 5 - Configuration
Camera List:
The camera list section displays a list of the currently attached cameras. Select a camera from
the camera list on the right and then drag it to the window where you want it to be displayed.
Click Scan Camera to update the list of connected cameras.
PTZ Control:
Control Pad
This control pad can be used to pan, tilt, and zoom
(PTZ) a dome camera, or electronically pan, tilt, and
zoom (PTZ) within the camera's predefined view
area, if one has been defined.
Zoom Control
Use the + and - buttons to zoom in or out.
Auto/Manual Focus Use this control to choose between automatic and
manual focus control.
Focus Near/Far
Use this control to choose between far or near focus.
Go to Preset
Select a preset from the drop-down list to apply it to
the camera.
Preset Name
Enter a name for the selected Preset.
Set as Preset
Click to apply the selected Preset. Once you have set
a preset, you can enable Patrol and Auto Pan modes.
System Information:
The system information section displays basic statistics and details about the NVR server. Click
on the title bar to collapse this section.
D-Link DNR-202L User Manual

Section 5 - Configuration
Storage Information:
The storage information section displays details of free space and used space on the attached
USB hard drive.
The log section displays detailed messages about your System, NVR, and Events. Click the
respective dial to isolate the category and click Previous or Next to navigate between pages.
D-Link DNR-202L User Manual

Section 5 - Configuration
This section shows the NVR's recorded video feeds. You may select any of the available icons listed below to playback, adjust, and export the
recorded video streams.
Cue In/Out
Click these icons to set cue in and cue out points. Indicators will show on the seek bar.
These buttons allow you to Step Backward, Rewind, Play, Pause, Speed Up, and Step
Playback Controls
Forward the video. Click Rewind or Speed Up more than once to increase the rate of
Playback Speed
This is the current speed of playback, either forward or in reverse.
Volume Bar
Click on the speaker icon to mute/unmute and use the bar to adjust the volume.
Seek Bar
You can drag on the bar to jump to any point in the video for playback.
Info Sections
You can see details of recordings in the Calendar, Event List, and Playback Menu sections.
D-Link DNR-202L User Manual

Section 5 - Configuration
The calendar displays days when recordings were made, as indicated by a highlight. You can
navigate to the day, month, and year of your choice. Clicking on a highlighted date will open
the View Recorded Files window.
Event List:
The system information section displays basic statistics and details about the NVR server. Click
on the title bar to collapse this section.
Playback Menu:
Video Export
Click this to open the video export menu to save the
video to a file.
Click to capture an image of the current video
stream and save it.
D-Link DNR-202L User Manual

Section 5 - Configuration
Searching Recordings
Click a date to access the View Recorded Files panel and select the video records which you would like to review.
Date Selection Area
Select the year, month and day of the recording you wish to view. Dates
with recordings available for playback are highlighted.
Time Period Selection
Select a beginning and end time for the recording you wish to view.
Video Preview
When Enable Preview is checked, this area will display a preview.
This timeline will adjust according to the level of zoom selected.
Available Streams
This area lists the recording devices available.
Zoom Slider
Use the zoom slider control to zoom in and out of the timeline.
Available Recordings
Recordings are graphed below the timeline. Blue bars indicate an event
was recorded. Red bars indicate the camera is set to always record.
Selected Period
Click within the timeline to select a recording period.
D-Link DNR-202L User Manual

Section 5 - Configuration
Step 1: From the Date Selection area at the top left of the Date Time
panel, select the date you would like to search for the recording. The dates
highlighted on the timetable indicate available recorded video records.
Step 2: Colored bars shown in the timeline area differentiate recording types
from each other. This will help you select video clips.
Step 3: Select a time period using the Start Time and End Time in the Date
Time Period section. Alternatively, select a range from the timeline.
Step 4: Select the Enable Preview option to get a preview of the video you
Step 5: Highlight the video clip(s) you would like to review by left-clicking and
dragging the time period in the timeline area. The scale of the timeline can be
modified using the icon at the bottom left corner.
Step 6: Click the OK button to begin playback.
D-Link DNR-202L User Manual

Section 5 - Configuration
Save Recording to AVI
After selecting a recording following the steps outlined in "View Recording" on page 17, users can export the video in AVI
Step 1: During playback, users can choose the camera from which they would
like to save a video clip.
Step 2: Set the cue in and cue out points; the cue in and cue out time will be
shown on the information window. Then click the Video Export button.
Step 3: Click Browse and choose the folder where you would like to save the file.
Step 4: Select the export options.
Step 5: Click the OK button.
D-Link DNR-202L User Manual

Section 5 - Configuration
Save Snapshot
During playback, users can choose to save an image from a selected camera.
Step 1: Click the Snapshot button when the desired image is shown on the screen.
Step 2: Choose the folder to save the file in.
Step 3: Click OK to save the image to that location.
D-Link DNR-202L User Manual

Section 5 - Configuration
Setup Wizard
Use this tab if you want to follow the simple steps of the Setup Wizard.
Click the Wizard icon
to begin the Setup Wizard.
Click Next to begin the Setup Wizard.
D-Link DNR-202L User Manual

Section 5 - Configuration
STEP 1: Choose a password for your device.
Click Next to continue.
STEP 2: Choose your time zone from the drop-down menu.
Click Next to continue.
STEP 3: Choose your network connection type.
Select Static IP if your Internet Service Provider has provided
you with connection settings, or if you wish to set a static
address within your home network.
Note: Select DHCP if you are unsure of which settings to choose.
Click Next to continue.
D-Link DNR-202L User Manual

Section 5 - Configuration
STEP 4: Enter a name and description for your device.
Click Next to continue.
STEP 5: Click Finish to complete the setup process.
Please wait a few moments while the DNR-202L saves your
D-Link DNR-202L User Manual

Section 5 - Configuration
Network Setup
Click the Setup icon
to continue to configure advanced settings manually.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
Static IP: You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static
IP address will simplify access to your NVR in the future.
IP Address: The static IP address.
Subnet Mask: The default value “” is used to determine if the
destination is in the same subnet.
Gateway IP Address: The gateway forwards frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to
a different subnet.
DNS1: Primary domain name server that translates names to IP addresses.
DNS2: Secondary domain name server to backup the primary one.
DHCP Server: Under Static IP, enable or disable the DHCP server. If your network
doesn’t have a DHCP server, enable NVR DHCP server for easier local
network setup. You can configure the DHCP IP address range and
DHCP lease time manually.
Apple: Enable Bonjour for multicasting. You can customize the NVR name
for identification by Bonjour services.
D-Link DNR-202L User Manual

Section 5 - Configuration
Audio and Video
This section will allow you to configure and modify the audio and video parameters for each camera.
Step 1: Select the camera which you would like to modify from the camera list.
Step 2: NVR will display the parameters for the selected camera. You can modify
the parameters for a main and sub profile on this page.
Camera Name: The name of the camera.
Video Format: Select the video format the camera supports.
Frame rate: Select the frame rate.
Resolution: Select the resolution.
Bit rate: Select the bit rate.
Quality: Select the image quality.
Audio: Check the Enable Audio option for live view and recording
Go to Web: Click to connect to the web page of the selected network camera
for advanced setup. For example, motion detection should be
configured via the camera web interface to enable the NVR to receive
the trigger message.
Step 3: Click the Save Settings button.
Note: The system will adjust the frame rate automatically based on the maximum frame rate
which that camera can support.
D-Link DNR-202L User Manual

Section 5 - Configuration
Recording Schedule
On this page, set the recording schedule for automated recording of events.
Enable Scheduled Tick to enable recording by schedule.
Enable Audio Tick to enable audio recording if supported by the camera.
Enable Automatic Tick to allow the NVR to overwrite recorded events if there is no
Overwrite: more free space on the hard drive.
Pre-record: Select the number of seconds you want the camera to record
prior to the event being recorded.
Post-record: Select the number of seconds you want the camera to record
after the event is recorded.
Continuous Recording: Select this and drag on the calendar below to specify times for
continuous recording.
Record On Event: Select this and drag on the calendar below to specify times for
recording only when events occur.
You can also edit the scheduling timetable by click the Always, Add/Edit
Schedule, Delete, and Copy buttons. Simply click on a day and then use the
buttons to perform an operation.
D-Link DNR-202L User Manual

Section 5 - Configuration
E-mail Settings
Set the email configuration on this page to receive notifications from the NVR server.
Sender Email Address: Enter the sender's email address.
Server Address: Enter the sender's email server address.
User Name: Enter the Username of the sender account.
Password: Enter the Password of the sender account.
Port: Enter the SMTP port of the sender's server. Check the box if it
requires a secure connection.
Test: Click this button to send a test e-mail.
Contact User Name: Enter a username for the recipient.
Contact Email Address: Enter the email address for the recipient. Click Add to add the
recipient to the list.
D-Link DNR-202L User Manual

Section 5 - Configuration
Event Settings
In a typical application, when motion is detected, the DNR-202L sends an alert via e-mail as a notification. For each channel,
an event can be triggered by many sources, such as motion detection or digital input. When an event is triggered, a specified
action will be performed.
Connection Lost: This option allows you to receive notifications when the
connection to this camera is lost.
Motion Detected: This option allows you to receive notifications when motion is
detected during camera live video monitoring for this channel.
Digital Input: This option to allow you to receive notifications when an
external trigger input is received for this channel.
Buzzer: This option to allow you to receive notifications when a camera
loses network connection for this channel.
E-mail: Select this option to have e-mail sent to a specified SMTP
account after receiving a camera event. Click Copy to apply
event and event actions to specific channels.
Hard Disk Space Full: This option allows you to receive notifications when the hard
drive space if full on the attached USB drive.
Hard Disk Error: This option allows you to receive notifications when the
attached hard drive has an error.
Network Disconnected: This option allows you to receive notifications when the NVR
connection to your network is lost.
Event Action: Enable buzzer and e-mail notifications by checking the
corresponding boxes.
D-Link DNR-202L User Manual

Section 5 - Configuration
This page displays the system, NVR, and event messages of your NVR. You can click Download to save the logs to a text file
and click Clear to delete the logs.
D-Link DNR-202L User Manual

Section 5 - Configuration
Display and Language
Language: Choose a language for the system menus.
Device Name: Enter the name of the NVR.
Auto Scan Interval: Enter a time for auto-scanning of IP cameras in your network.
Enable Camera OSD: Tick to show the OSD on the stream.
Camera Name: Tick to show the camera name on the OSD.
Camera Number: Tick to show the camera number on the OSD.
Date: Tick to show the date on the OSD.
Time: Tick to show the time on the OSD.
Bit Rate: Tick to show the bit rate on the OSD.
Frame Rate: Tick to show the frame rate on the OSD.
Size: Select from the drop-down the size of the OSD information.
Color: Select the color of the OSD information.
D-Link DNR-202L User Manual

Section 5 - Configuration
User Account
Admin Password Setting: Set a new password for the administrator’s account.
Note: Click Save to save the new password.
User Name: All the existing user accounts will be displayed here. You may
delete accounts included in the list, but you may want to reserve at
least one as a guest account.
Add: Opens up a window to add a new user with an associated password.
Delete: Select a user name from the list and click to delete the account.
Live Privileges: Tick to allow viewing the channels and using PTZ control in live
Playback Privileges: Tick to allow viewing the channels and exporting recorded video
in playback mode.
Miscellaneous: Tick to allow the user to use Setup, Manual backup, and Speaker
The Administrator account can configure all functions of the NVR. This account cannot be
deleted. The default password for “admin” is blank. Setting a password after the first login is
strongly recommended. If the administrator password is lost, you may hold the reset button
on the rear panel of the device to reset the NVR to factory defaults. This will erase all the
previously-saved settings.
D-Link DNR-202L User Manual

Section 5 - Configuration
System Restart: Click to reboot the NVR.
Restore to Factory Click Restore to reset all configurations to factory default settings.
Default Settings:
Save Configuration Save the configuration settings to your computer.
Load Configuration Browse your computer for configuration settings to be loaded into
Settings: the NVR.
Idle Time(Minutes): Set the time in minutes for system idle.
Buzzer: Turn on or off the buzzer.
Enable Auto Plugin: Enable or disable auto plugin.
D-Link DNR-202L User Manual

Section 5 - Configuration
Time and Date
Set Date and Time Manually: Selecting this option allows you to configure the daylight
saving date and time manually.
Set Time From My Computer: This uses the time settings from your computer to apply
the NVR time settings.
Synchronize with NTP Server: Enable this feature to obtain time automatically from an
NTP server.
NTP Server: Network Time Protocol (NTP) synchronizes the DNR-202L
with an Internet time server. Choose the one that is
closest to your location.
Time Zone: Select your time zone from the drop-down menu.
Enable Daylight Saving: Select this to enable daylight saving time.
Auto Daylight Saving: Select this option to allow your camera to configure the
daylight saving settings automatically.
Set Daylight Saving Time This option allows you to set the Daylight Saving Time
Manually: manually.
D-Link DNR-202L User Manual

Section 5 - Configuration
Firmware Upgrade
The device firmware can be upgraded from this page. The firmware update must be saved on the local hard drive of your
computer. Click the Browse button to search the local hard drive for the firmware update file. Click Load to upgrade. You may
check for firmware updates on the D-Link Support website.
D-Link DNR-202L User Manual

Section 5 - Configuration
Hard Drive
The section provides users with an overview of the attached USB storage devices, and users can also format and eject attached
USB storages devices.
Note: All data will be erased from the attached USB storage device during formatting.
D-Link DNR-202L User Manual

Section 5 - Configuration
Camera Search
Cameras in your network can be added to your NVR from this page. You can then view camera information and preview the
camera's feed. To add cameras, follow the steps below:
Step 1:
Click Search at the top left and the NVR will automatically
search for all compatible cameras on the same network.
Once it is detected in the top left window, click on
the camera to highlight it and its information will be
displayed on the bottom right.
Step 2:
Enter the User Name and Password of the selected
Step 3:
Select a channel from the Add to Channel drop-down
Step 4:
Click Add and the selected camera will be added to the
Camera List window at the top right.
Step 5:
Click Save to finish adding the camera.
D-Link DNR-202L User Manual

Section 5 - Configuration
Camera Name: Enter a name for the camera.
Address: Enter the IP address of the IP camera.
Port: Enter the port used by the IP camera.
User Name: Enter the user name of the IP camera.
Password: Enter the password of the IP camera.
Vendor: Select the IP camera vendor from the drop-down list.
Model: Select the IP camera model from the drop-down list.
Add to Channel: Select the channel from 1-4 that you want the camera to stream to.
Update: Click this button to update changes made to the camera settings.
Auto Detection: Click this button to automatically detect camera information.
Clear: Click this button to clear current camera settings.
D-Link DNR-202L User Manual

Section 5 - Configuration
This section describes configuring and viewing live video from your network cameras, the functions of the live video screen,
and the PTZ functions.
D-Link DNR-202L User Manual

Appendix A - LED and Buzzer Definition
LED and Buzzer Overview
Power & Network LED
Power down / Link Up
Power on
Blinking Firmware update
Network failure
(Network) On
Network Link Connected
Blinking Traffic
HDD1 disabled
HDD1 enabled
Blinking Read / Write HDD1
HDD2 disabled
HDD2 enabled
Blinking Read / Write HDD2
Trigger Method
USB1 button
Press button for 3 seconds
Un-mount HDD1, Buzzer will beep (long).
USB1 LED off.
USB2 button
Press key2 for 3 seconds button
Un-mount HDD2, Buzzer will beep (long).
USB2 LED off.
Auto scan button
Auto scan function- Press scan button for 3 seconds
Start auto scan IP Cameras in local network.
Buzzer will beep (long).
Camera Echo function- Press scan button for 0.5 second
Echo IP Camera found (1 beep for 1st camera
found, 2 beeps for 2nd, 3 beeps for 3rd, 4 beeps
for 4th).
Buzzer will beep (short).
Reset button
Press reset pin for 10 seconds
Reset to factory default.
Buzzer will beep (long).
D-Link DNR-202L User Manual

Appendix B - Technical Specifications
Technical Specifications
Technical Specifications
Network Video Recorder
Video Format
• H.264/MPEG-4/MJPEG for live streaming
• JPEG for still images
Audio support
• G.711
• G.726
Reset Button
• Reset to factory default
Auto Scan Key
• IP Camera Finder (press for 3 seconds)
External Device Interfaces
• 10/100 BASE-TX Fast Ethernet port
• 2 x USB 2.0 ports for external HDD storage
Video Management
Live View Resolution
• 1280 x 720 (1 channel)
• 640 x 480 (4 channels)
Live View Display Modes
• 1 and 4 channels display
Recording Modes
• Schedule, Manual, Event (Motion)
• Continuous
Recording Performance
• 32 Mbps
Playback Modes
• Time, Event, Camera
Playback Performance
• Max. 720p for 1 channel
• 640 x 480 (4 channels)
Playback Control
• Play, Stop, Pause, Forward, Backward, Next, Previous
Video Export Formats
Physical Interface
• RJ45 10/100 LAN Ethernet (auto MDI/MDIX)
Network Protocols
• DHCP Client
• DNS Client
• HTTP Server
• UPnP
User Management
• Administrator password authentication
Automatic Logoff
• Idle user timeout on configuration pages
D-Link DNR-202L User Manual

Appendix B - Technical Specifications
System Requirements
• Microsoft Windows: XP SP3, Vista, 7, 8
• Mac OS X 10.7 or later
Browser Requirements
• Internet Explorer 8 or higher
• Firefox, Chrome, Safari
Mobile Support
• Android
• iOS
Remote Management
• Take snapshots/video via web browser
• Configuration interface accessible via web browser
System Log
• Status of active users
• Login history
• CE
• C-Tick
• 90 grams
External Power Adapter
• Input: Min 0.5 V / 2.5 A
• Consumption: 8.5 watts ± 5 % (include 2 x 2.5 HDD)
• Operating: 0 to 40 °C
• Storage: -20 to 70 °C (-4 to 158 °F)
• Operating: 10% to 90% non-condensing
• Storage: 5% to 95% non-condensing
20.35 mm
117.5 mm
70 mm

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Regulatory Information
Caution: Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adapter first
before connecting it to a power outlet.
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not instal ed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except
in accordance with FCC multi-transmitter product procedures.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all Wi-Fi
product marketed in US must fixed to US operation channels only.
RF Frequency Requirements:
This device is for indoor use only when using all channels in the 5.150-5.250 GHz, 5.725-5.850 GHz frequency ranges. High
power radars are allocated as primary users of the 5.150-5.250 GHz, 5.725-5.850 GHz bands. These radar stations can cause
interference with and/or damage this device. This device will not operate on channels which overlap the 5600-5650 MHz
band. It is restricted in indoor environments only.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 25 cm between the radiator and your body.
Customer Information:
(1) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this
equipment is a label that contains, among other information, a product identifier of 0. If requested, this number must be
provided to the telephone company.
(2) If this equipment 0 causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will
notify the customer as soon as possible. Also you will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
(3) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make
necessary modification to maintain uninterrupted service.
(4) If you experience trouble with this equipment, you disconnect it from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
(5) Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any
parts of device except specified.
(6) Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
commission or corporation commission for information.
(7) If the telephone company requests information on what equipment is connected to their lines, inform them of:
(a) The telephone number that this unit is connected to,
(b) The ringer equivalence number 0
(c) The USOC jack required 0 and
(d) The FCC Registration Number 0
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many devices
can be connected to your telephone line. In most areas, the sum of the RENs of all devices on any one line should not
exceed five (5.0). If too many devices are attached, they may not ring properly.
(8) If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
equipment does not disable alarm equipment, consult your telephone company or a qualified installer.
Safety Warning:
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the
ATTENTION: Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez les piles usagées selon les
Industry Canada Statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin
de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator & your body.

Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
This unit is to be used with a power supply, model AMS3-1201500FU.
Cet appareil doit etre utilise avec une source de courrant, modele AMS3-1201500FU.

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the

ATTENTION: Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez les piles usagées selon les
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
無線傳輸設備 (UNII)
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。
電磁波曝露量MPE標準值(MPE) 1 mW/cm2,送測產品實值為 0 mW/cm2
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
European Union:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer
to the Declaration of Conformity.

Notice of Wireless Radio LAN Usage in The European Community:

• At the time of writing this addendum, some countries such as Italy, Greece, Portugal and Spain have not allowed operation
of radio devices in the 5 Ghz bands, although operation of 2.4 Ghz radio devices are allowed. Please check with your local
authority to confirm.
• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz
band to reduce the potential for interference.
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA
countries, except in France where restrictive use applies. This device may not be used for setting up outdoor radio links in
France and in some areas the RF output power may be limited to 10 mW EIR P in the frequency range of 2454 –2483.5 MHz.
For detailed information the end-user should contact the national spectrum authority in France.
This equipment may be operated in AL, AD , BE , BG, DK, DE , FI, FR, GR, GW, IS, IT , HR , LI, LU, MT , MK, MD , MC , NL, NO, AT ,
OL, PT, RO, SM, SE, RS, SK, ES, CI , HU , CY
Usage Notes:
• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be
applied on the products according to the country where the equipment will be deployed.
• This device is restricted from functioning in Ad-hoc mode while operating in 5 Ghz. Ad-hoc mode is direct peer-to-peer
communication between two client devices without an Access Point.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required
when operating in 5 Ghz within the EU.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
2.4 GHz Wireless Frequency and Channel Operation in EEC Countries:
Frequency Band
Max output power (EIRP)
2400 - 2454 MHz
100 mW
Guadeloupe, Martinique, St Pierre
et Miquelon, Mayotte
2454 - 2483.5 MHz
100 mW indoor, 10 mW outdoor
Reunion et Guyane
2400 - 2483.5 MHz
100 mW
Rest of EU community
2420 - 2483.5 MHz
100 mW
R&TTE 1999/5/EC
WLAN 2.4 - 2.4835 GHz
IEEE 802.11b/g/n
Spectrum Regulation
MHz, Europa (ETSI)
max. EIRP Innenbereich
max. EIRP Außenbereich
2400 - 2483.5 MHz
100 mW
100 mW
2400 - 2454 MHz
100 mW
100 mW
2454 - 2483.5 MHz
100 mW
10 mW
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
5 GHz Wireless Frequency and Channel Operation in EEC Countries:
Allowable 802.11a Frequencies and Channels
5.15-5.25 GHz
(Channels 36, 40, 44, 48)
5.15-5.25 Ghz & 5.725-5.875 Ghz
(Channels 36, 40, 44, 48, 149, 153, 157, 161, 165, 169)
5.15-5.35 GHz
(Channels 36, 40, 44, 48, 52, 56, 60, 64)
5.15-5.35 & 5.47-5.725 GHz
Denmark, Germany, Iceland, Finland,
(Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108,
Netherlands, Norway, Poland, Sweden, Slovenia,
112, 116, 120, 124, 128, 132, 136, 140)
Luxembourg, U.K., Ireland, Slovak, Switzerland,
Hungary, Italy
5.15-5.35 Ghz & 5.725-5.875 Ghz
(Channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157,
Czech Republic
161, 165, 169)
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
European Community Declaration of Conformity:
Česky [Czech]
D-Link tímto prohlašuje, že tento DNR-202L je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede D-Link erklærer herved, at følgende udstyr DNR-202L overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt D-Link, dass sich das Gerät DNR-202L in Übereinstimmung mit den
Deutsch [German]
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab D-Link seadme DNR-202L vastavust direktiivi 1999/5/EÜ põhinõuetele
ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, D-Link, declares that this DNR-202L is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente D-Link declara que el DNR-202L cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
Français [French]
Par la présente D-Link déclare que l'appareil DNR-202L est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente D-Link dichiara che questo DNR-202L è conforme ai requisiti essenziali ed
alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo D-Link deklarē, ka DNR-202L atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]
Šiuo D-Link deklaruoja, kad šis DNR-202L atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart D-Link dat het toestel DNR-202L in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Malti [Maltese]
Hawnhekk, D-Link, jiddikjara li dan DNR-202L jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, D-Link nyilatkozom, hogy a DNR-202L megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym D-Link oświadcza, że DNR-202L jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
D-Link declara que este DNR-202L está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
D-Link izjavlja, da je ta DNR-202L v skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky [Slovak]
D-Link týmto vyhlasuje, že DNR-202L spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
D-Link vakuuttaa täten että DNR-202L tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Warning Statement:
The power outlet should be near the device and easily accessible.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Safety Instructions
Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential
damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not
expressly approved by D-Link may result in the loss of product warranty.
Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:
• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from
the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited
by local law.
• Modify or alter the device.
• Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following
Power Sources
• Observe and follow service markings.
• Do not push any objects into the openings of your device unless consistent with the authorized operation of the device.
Doing so can cause a fire or an electrical shock by shorting out interior components.
• The powering of this device must adhere to the power specifications indicated for this product.
• Do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical shock.
• Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for
• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure
that nothing rests on any cables.
• Operate the device only from the type of external power source indicated on the electrical ratings label.
• To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match
the power available at your location.
• Also be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option
intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your
device. The power cable must be rated for the device and for the voltage and current marked on the device's electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the device.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
• To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets.
These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the
grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.
• Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension
cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
• To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
conditioner, or uninterruptible power supply (UPS).
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always
follow your local/national wiring rules.
• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following
• Install the power supply before connecting the power cable to the power supply.
• Unplug the power cable before removing the power supply.
• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the
power supplies.
• Do not service any product except as expressly set forth in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical
shock. Only a trained service technician should service components inside these compartments.
• To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-replaceable; therefore,
there is no reason to access the interior.
• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device
gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
• Use the device only with approved equipment.
• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops
and uneven surfaces.
• Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).
• Do not use this device in areas with high humidity.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
• This device must not be subjected to water or condensation.
• Keep your device away from radiators and heat sources. Also, do not block cooling vents.
• Always unplug the power before cleaning this device.
• Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices.
• Use a dry cloth for cleaning.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from
your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically
touching an unpainted metal surface on the chassis.
You can also take the following steps to help prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic
packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging,
be sure to discharge static electricity from your body.
2. When transporting a sensitive component, first place it in an antistatic container or packaging.
3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic
grounding strap.
This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's
instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Disposing of and Recycling Your Product
ENGLISH This symbol on the product or packaging means that according to local laws and regulations this product
should be not be disposed of in the household waste but sent for recycling. Please take it to a collection point
designated by your local authorities once it has reached the end of its life, some will accept products for free.
By recycling the product and its packaging in this manner you help to conserve the environment and protect
human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the
environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible,
by using recyclable, low toxic materials in both products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you
will help to save energy and reduce CO2 emissions.

To learn more about our environmentally responsible products and packaging please visit

Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender
örtlicher Gesetze und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer
Wiederverwertung zuzuführen ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend
amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Für
die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf diese Weise
durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die
menschliche Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und
fühlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit
dem Ziel größtmöglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei
Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf
D-Link DNR-202L User Manual

Appendix C - Regulatory Information
diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.

Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende
Informationen im Internet unter


Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations
locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un
point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En
recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la
santé de l’homme.

D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons
à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en
utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.

D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez
ainsi des économies d’énergie et réduirez vos émissions de CO2.

Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.


Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este
producto no se debe desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida
designado por las autoridades locales una vez que ha llegado al fin de su vida útil; algunos de ellos aceptan
recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el
medio ambiente y a proteger la salud de los seres humanos.

D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades
y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean
lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link DNR-202L User Manual

Appendix C - Regulatory Information

D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a
ahorrar energía y a reducir las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio

La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi
e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una
volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali.
Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto
e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la salute umana.

D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre
al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente,
utilizzando materiali riciclabili a basso tasso di tossicità sia per i prodotti che per gli imballaggi.

D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo
modo si contribuirà a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.

Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet
mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra
het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe
werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u
hiervoor dient te betalen.
Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de
mens te beschermen.

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze
impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van
recycleerbare producten met lage toxiciteit in product en verpakking.

D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door
dit te doen bespaart u energie en beperkt u de CO2-emissies.
Breng een bezoek aan voor meer informatie over onze milieuverantwoorde producten en

Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi
przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz
należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do
tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki
wskazanego przez lokalne władze.
Poprzez proces recyklingu i dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą
Państwo chronić środowisko naturalne i dbać o ludzkie zdrowie.

D-Link i środowisko
W D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu
naszych działań i produktów na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje
i wytwarza swoje produkty w taki sposób, aby były one jak najbardziej przyjazne środowisku, stosując do tych celów
materiały nadające się do powtórnego wykorzystania, charakteryzujące się małą toksycznością zarówno w przypadku
samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one
wykorzystywane. Postępując w ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.

"Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko
prosimy zapoznać się ze stroną internetową"

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí
vyhazovat do komunálního odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné
místo určené místními úřady k tomuto účelu. Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku
i obalu pomáháte chránit životní prostředí i lidské zdraví.

D-Link a životní prostředí
"Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a
snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve
výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály."
"Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze
zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2."

Více informací o našich ekologických výrobcích a obalech najdete na adrese

Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak
megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra
kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt
gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és a csomagolás újrahasznosításával
segíti védeni a környezetet és az emberek egészségét.

A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre
gyakorolt hatásainak csökkentésére. Az ezen hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát
termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-tartalmú termékeket gyárt és
csomagolásokat alkalmaz.

A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a
tápforrásból, ha nem használja azokat. Ezzel segít az energia megtakarításában és a széndioxid kibocsátásának
Környezetbarát termékeinkről és csomagolásainkról további információkat a weboldalon tudhat meg.

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke
skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning.
Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når det er kommet til slutten av levetiden.
Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet og forpakningen
hjelper du å verne miljøet og beskytte folks helse.

D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet.
For å minimalisere denne innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke
resirkulerbare, lav-toksiske materialer både i produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare
energi og å redusere CO2-utslipp.

"For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til"


Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må
bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever
produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets
levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til
genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.

D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på
miljøet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som
muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage.

D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du
til at spare energi og reducere CO2-udledningerne.

Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä
tuotetta ei pidä hävittää yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on
elinkaarensa päässä, toimita se lähimpään viranomaisten
hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä
ympäristön että ihmisten terveyttä ja hyvinvointia.

D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta
ympäristölle mahdollisesti aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee
ja valmistaa tuotteensa mahdollisimman ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia
aineita sisältäviä materiaaleja sekä tuotteissaan että niiden pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin
autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä.
"Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www."

Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter
inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din
lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt
återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.

D-Link och miljön

På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och
produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska
vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att
göra detta hjälper du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar

D-Link DNR-202L User Manual

Appendix C - Regulatory Information
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais,
este produto não deverá ser eliminado juntamente com o lixo doméstico mas enviado para a reciclagem.
Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o
fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva
embalagem desta forma, ajuda a preservar o
ambiente e protege a saúde humana.

A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas
operações e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constrói os seus produtos
para que estes sejam o mais inofensivos para o ambiente possível, utilizando meteriais recicláveis e não tóxicos tanto nos
produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção
ajudará a poupar energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite
D-Link DNR-202L User Manual

Document Outline