D-Link VisualStream™
330K Pixel PC Camera

Ver. 2.00



Package Contents--------------------------------------------------------------------------- 3
Introduction --------------------------------------------------------------------------------- 3
Getting To Know Your VisualStreamTM PC Camera ---------------------------------- 4
Features and Benefits------------------------------------------------------------------------ 4

How to Use Your D-Link VisualStreamTM Camera ------------------------------- 4
How to Install MSN Messenger ---------------------------------------------------- ----- 5
Using Your PC Camera with MSN Messenger------------------------------------------- 5

How to Install and use Arcsoft Software----------------------------------------------- 6


Package Contents

Contents of Package
D-Link DSB-C320 330K Pixel PC Camera
USB 1.1 Cable
CD-ROM (containing Drivers, Installation Guide, Manual, Application Software and
D-Link Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements

Pentium III 500 MHz, Celeron, AMD Athlon processor, or higher

64MB RAM (or minimum OS requirement whichever is higher)

Microsoft Windows XP/2000/ME/98SE

Microsoft DirectX 8.1b or higher

Update Service Pack

200MB free hard drive space

CD-ROM drive

USB Port (USB specification version 1.1)

24Bit color display adapter

Windows compatible sound card and speakers (full duplex sound card recommended)

Thank you for purchasing the D-Link DSB-C320 PC Camera. The DSB-C320 is a complete
audiovisual solution for all of your e-communications. Talk to your family, friends, and colleagues
face-to-face over the Internet, create videos, digital photo albums, and more, all the software needed
to start creating digital content and enabling video communication is included. This manual will
guide you through the features of your new PC Camera and provides step by step instructions for
getting you started with the bundled Arcsoft Software.


Getting To Know Your VisualStreamTM PC Camera

Features and Benefits
Resolution 648x480 Pixels
Snapshot Button For Easy Still Image Capture
Versatile Clip Base Design For Notebook and Desktop PC
Arcsoft Software Included

How to Use Your D-Link VisualStreamTM Camera

Choose the mode of “50Hz” or “60Hz” according to your power source environment or video
output signal system to avoid the blurry image.


Amcap Option Video Capture Filter
Click OK

Turn the manual focus ring to adjust the image.
Press the snapshot button to capture a single frame.

How to Install MSN Messenger
Please log on to http://messenger.msn.com to download.
For Windows 98Second Edition/Me/2000 Users
After the installation package is downloaded to your computer, follow the instructions to
install MSN Messenger.
After the installation is completed, click Start, point to Programs, and click Windows

For Windows XP Users
Click Start, point to Programs, and click Windows Messenger.
After you run Messenger for the first time, you can add friends to your list and send
instant messages.

Using Your PC Camera with MSN Messenger

Plug the PC camera into your PC first.
For Windows 98Second Edition/Me/2000 Users
Click “Messenger” to go to the main screen. You are now ready to have a Video
Conversation with MSN Messenger.
For Windows XP Users
Click “Messenger” to go to the main screen, click Actions, click Start a
Video Conversation
and you are ready to have a Video Conversation with Messenger.
If you need more information or instructions on how to use a specific feature or tool,
click the “Help” button in the upper right-hand corner of the screen.


How to Install Arcsoft Software
Simply put the provided software CD into your CD drive. The set-up software will automatically
start, prompting you through the steps to install the video and photo software. You may enter the
selection for the destination folder, the Start menu, Programs group and other set-up options. The
set-up process will copy the applications to the destination folder. Note if Windows auto-run
feature has been turned off on your computer, you will need to start the Setup.exe application on the
software CD.

Click Install Arcsoft Software

How to use Arcsoft Software
Getting Started
All applications can be started from the Application Panel. The Application Panel can be started
by clicking on the Web cam Companion icon.
Welcome. Click anywhere on the image below for details:


The program is divided into two main sections: My Captures, and the camera preview area. You
can adjust which section is larger by simply clicking and dragging the area in between the two

Application Menu


Refresh Contents - Refreshes the screen to update any changes to your captured thumbnails.
Page Setup - View and modify your printer settings.
Print - Prints selected images.
Stop Web Camera - Turns off your cam.
Quit - Closes the application.

Cut - Removes the selected files from their current location and stores them in memory for pasting
in another location.
Copy - Copies the selected files and stores them in memory for pasting in another location.
Paste - Places the contents of the clipboard memory into the current location.
Select All - Selects all thumbnails in the current location.

Web Camera Settings - View and modify the camera options (brightness, contrast, etc.; dependent
on the device).
Capture Settings - View and modify your capture settings (snapshot and video resolution).
Media Folder - Change the directory that stores newly captured files.
Upgrade Software - Search for updates to the program.

This menu contains links to various help resources, including this Help file.
Slide Show Button

Click this button to run a slide show of the selected images. A slide show dialog will appear.

Choose the amount of time that each slide will be displayed before changing to the next slide.
Check the "Loop Slide Show" button to have your presentation continually loop over and over.
Press ESC to exit your slide show at any time.


Rotate Button

Click this button to rotate the selected files 90 degrees.

Email Button

Click this button to attach the selected files to an email.

Print Button

Click this button to print the selected images. Each image will print on a separate page.

New Folder Button

Click this button to create a new folder in the "Folders" section of My Captures.

Delete Button

Click this button to delete the selected files or folder.

My Captures
This section sorts your captures so you can view them in a variety of ways. View all captures,
images only, videos only, or by folder. The contents of the section you select will be displayed in the
thumbnails area.

Double-click a thumbnail to view it. Arrows on either side let you browse the various files (no
arrow will appear on the left side when the first file is displayed; no arrow will appear on the right
side when the last file is displayed). Playback controls will appear beneath videos.


Full Screen Button

Click this button to display your camera over the entire screen. Press ESC to exit full screen mode.

Disconnect Button

Click this button to disconnect your camera.

Camera Preview

This area shows you a live stream from your camera

Capture Image

Click this button to capture a still image from your cam.

Capture Video

Click this button to begin capturing video from your cam. Click it again to stop.

Chat Tab

This tab offers shortcuts and/or links for a variety of video and instant messaging programs.

Web Camera Settings

Click this button to view and modify your camera settings/properties. The options here will vary
depending on your device.

Show/Hide My Captures

These buttons hide and display the My Captures section, respectively. Hide the My Captures


section if you'd like to focus more on your cam stream.

Capture Settings Button

Click here to adjust the resolution for both captured still images and video clips. Simply select the
resolution from the respective pull-down.

Video Impression

If you’re looking for an easy way to create and share home videos, VideoImpression is perfect for
you. By creating a VCD, your movie is burned onto a CD, ready for playback on most
commercial DVD players, right on your TV! Even if you’re new to computers and don’t know
much about “files” and “hard drives” and whatnot, you’ll scrape by just fine. In fact, this program
is designed specifically for general consumers like yourself.

If you’re the type that likes to dive right into things, by all means go for it! Playing around with
the various buttons and commands is one of the best ways to learn how programs work. However,
if you want to take it slow, take some time to go through this quick start guide. Also, don’t forget
to use the Help file that’s built into the program. It closely defines each command on every screen.
This guide is more of a practical tutorial.

VideoImpression lets you create two types of projects: video and slide show. We’ll walk through
the creation of both types.



Videos are constructed by combining still images and/or existing movie clips. All components are
arranged onto what’s called the “Storyboard.” When you make your final video, all of the
components on the Storyboard are combined together and saved as a single video file. In addition
to still images and videos, you can also add transitions between each component as well as sound
clips on two separate audio tracks.

Video Clips & Still

The Storyboard

Confused? Don’t worry. We’ll talk more about the Storyboard later. It’ll all come together.

When you first run the program, a window will appear that lets you choose the type of project you
want to make (you can also open previously saved projects). Choose “Create a New Video.” A
new window will appear. It will contain multiple options for gathering your video content.

For this walk-though, choose “Get From Album.” Even if you choose one of the other options,
you’ll end up at your albums soon or later. Albums contain shortcuts to files stored on your
system. You’ll grab most of your “media” for movie construction from your albums.



This first step is where you select the “media” (still images, videos, and sound clips) that you want
to use to create your movie. All you need to do is choose the components you want and add them
to the Storyboard. When you save—or “produce”—your movie, all the components on the
Storyboard will be combined together into a single video file.

Let’s look at the Storyboard again:

Video Clips & Still

The Storyboard

The large squares are reserved for still images and video clips. The two horizontal bars beneath
are reserved for audio tracks. The smaller squares between the still image/video clip components
are for “transitions.” You’ll learn more about transitions later.

The top-left area of the program contains your albums. Use the pull-down to choose the one you
want. To create a new album, choose “<New Album>” from the pull-down. Click the Add
button (
) to browse your system for files to add to it. You can create multiple albums to keep
track of different types of photos (i.e., keep all your vacation photos in one album, separate from
your miscellaneous family photos, etc.).

You can differentiate the types of files within an album by the way they look. Images simply
appear as thumbnails. Video files appear as filmstrips. Audio files have a default speaker icon.

To add media to the Storyboard:
1. Double-click the component within the album.



1. Single-click the component within the album.
2. Click the Apply button (it’s the arrow beneath the album).

Don’t worry too much about adding your files in a particular order. You can click and drag them
on the Storyboard at any time to swap positions.

Don’t forget that you can add audio to two different audio tracks! You can overlap simultaneous
sound clips and adjust their volumes to create the perfect blend. If you need to record audio, you
can do so at a later step.

After adding your media, your Storyboard should look something like this:

To remove a media component from the Storyboard, click the trash can icon (
) after highlighting
(clicking) the component you want to remove.


Now’s a good time to talk about the Player. The Player is the video screen on the right side of the
display. It lets you preview each component on the Storyboard, as well as your entire movie.

The Player has standard playback controls. The slider beneath the preview window shows you the
progress of the video. There are two times listed; the first lists the total time of the clip, while the
second lists the time at the current position.

If you want to preview your entire movie (all of the components on the Storyboard played together),
click the Entire Movie button (
). If you want to preview only a specific component on the
Storyboard, click the Active Clip button (
). If you choose the latter, single-click the component
you want to preview on the Storyboard, then press the Play button.


You’re now ready to touch up and modify your movie components. Different editing options are
available depending on the component type.


1. Single-click the desired still image or video clip on the Storyboard.
2. Click and drag the sliders to your liking. You can preview the effect within the Player.



1. Single-click the desired image on the Storyboard.
2. Use the pull-down to select the duration (in seconds) of the selected still image.

During your final movie, the still image will display for the set amount of time before proceeding to
the next component.


1. Select the desired video or audio clip on the Storyboard.
2. Drag the Starting Mark to the spot where you would like the clip to begin playback.
3. Drag the Ending Mark to the spot where you would like the clip to end.


1. Select the desired video or audio clip on the Storyboard.
2. Drag the volume slider to the desired level.


The third step in the creation process lets you add cool scene transitions between each still image or
video component on the Storyboard. There are two tabs: Transitions and Themes.

Transitions are effects that occur as one movie component changes to another. You can add/delete
transitions in the same way that you add/delete media components. Click the “Randomize” button
to automatically add a random transition to each spot. You can go back to Step 2 to modify the
display time for your transitions as well.

“Themes” consist of transitions and effects that are applied over the entire Storyboard. They all
have a specific motif. Choose the theme you want, then click the Apply button. To remove a
theme (or all transitions on the Storyboard), click the Delete All Effects button (


This step lets you add text over any still image or video component on the Storyboard. Click on
the component you want, then type in your text. You can modify all the standard parameters, such


as font, size, style, alignment, and color.

You can also add a shadow. To do this, check the Shadow box. Click and drag within the
preview to position the shadow behind the text. Use the sliders to adjust the shadow blur and

Choose a text effect from the pull-down. These effects allow various types of motion, such as
scrolling or rotating text.

You can also control the exact display time for the text. In the Player, use the Starting and Ending
marks to set when the text will appear and disappear.


In addition to being able to add audio files to the Storyboard, you can also record audio directly
within the program. To record audio:

1. Click the Audio Settings button and verify the audio configuration (in general, higher
settings will yield higher audio quality but larger file sizes).
Click the red Record button.
2. Set the file name and save location for the recorded file. If you want, you can have the file
automatically added to an album for easy access in another project.
3. Click the Start button and begin your narration. Press the Stop button to stop recording.
Click the Add button to add the recorded audio to the Storyboard.



The final step lets you save your movie in a variety of ways. Consult the Help file for details on
the specifics of each case. For this guide, we’ll save a movie as a VCD. When you do this, you
can pop the CD into most commercial DVD players to see your movie on your TV!

1. Click on the CD tab.
2. Select the device/drive to which the movie will be written or “burned.”
3. Choose the burn speed.
4. Choose the file type. (Remember, we’re creating a VCD, so choose “Video CD File.”)
Click Start when you’re ready!

Congratulations, you’re done! Pop your VCD into your DVD player and enjoy your movie!



Creating a slide show is similar to creating a video, only there are fewer steps involved. Many of
the video creation concepts are applied here, so we won’t go into as much detail as a result. If you
have to, go back through the previous section again.

The only difference here from starting a video project is the first option. Whereas you’re able to
capture video for a video project, you can instead acquire an image from a connected TWAIN
device for your slide show:


This step is basically the same as the first step when creating a video. Choose the media that you
want to include in your slide show and add it to the Storyboard. The components on the
Storyboard will look nearly identical to the way they look for a video project.


The main difference that you’ll notice is the display time for each still image is noted on the
thumbnail. Change the display time by double-clicking it and entering a new time (in seconds).
You can apply the new display time exclusively to the image you’ve selected, or all of the images in
the slide show.


Effects (transitions) are added exactly the same as they are when creating a video. Double-click
the transition you want and it will automatically appear in the next available spot on the Storyboard.
Themes are not available for slide shows.


Unlike the Narrate step (Step 5) when creating a video, the Audio step when creating a slide show
offers you two different tabs: Soundtrack and Narration.

The latter works exactly the same as the Narrate step. You can record new audio clips, save them
to an album, and apply them to the Storyboard.

The Soundtrack option is a bit different. It offers you the ability to fit your slide show to the time
of any added audio:

Check the “Fit Slide Show to Soundtrack” box if you would like the current audio tracks to
establish the length of your slide show. The display time for still images will automatically be set
so that the slide show will end at the same time as the audio tracks.

You can also set the display time for the current still image (or all still images) in this window.


Saving—or “producing”—your slide show works just the same as producing a video. The
exception here is that you only have two choices: saving to your hard drive and burning a CD.
Slide shows are saved in the EXE file format, and cannot playback on DVD players.



Here are a few pointers to help you out:

1. Experiment. Click on every button. Choose every different option. You’ll learn the
most and have the most enjoyable experience if you just play around with the software.

2. Familiarize yourself with “albums.” The core of project construction stems from
understanding how albums work. We’ll tell you again here: albums are simply collections
of shortcuts to files stored on your system. You can “add” files to an album for fast and
easy access. If you delete an album thumbnail, the actual file is still on your system
(unless you actually choose to delete it).

3. Use the sample content. The program comes bundled with a few sets of still images,
video clips, and sounds. Use these to create a sample movie. Get comfortable with the
various controls and commands. All programs are intimidating at first, but trust us, with
just a little practice you’ll be making movies and slide shows in no time!

4. Preview your project. Click the “Entire Movie” button when previewing your project
within the Player. Always know how your work is coming along so you can make changes
as you go along each step.

5. Use this guide along with the Help file. It’s a tad lengthy for a quick start guide, but
these pages walk you right through the gist of the program. Consult the built-in Help file
for specific details on any aspect of the application.

6. Check your audio levels. Remember, some of your videos may have sound on them.
Use the volume slider to mute a video’s sound if it ends up competing with any of the clips
you’ve added to the audio tracks.

7. Save often. This usually goes without saying.

8. Use the “Fill & Crop” option. Before adding still images to your Storyboard, click on the
Options menu, then highlight the Photo Sizing group. Choose “Fill & Crop.” This will
automatically make your still images display in a consistent size.

9. You can grab screenshots from your videos. Right-click within the Player while
displaying a video to see options for saving and printing the current frame.

10. Have fun!

Photo Impression

Welcome to ArcSoft Photo Impression 5! This tutorial will walk you through the six program
“modules.” Each module offers you commands to perform various imaging tasks. The six modules


Get Photo - Locate photos on your computer within various folders or ArcSoft albums.
Enhance - Quickly touch-up and modify your photos.
Create - Add text, frames, special effects, and more to any picture.
Project - Make your own calendars or “PhotoBooks.”
Print - Print out single or multiple photos in a variety of ways.
Send - Share your photos with friends and family.

Don’t forget about the built-in Help file. You can access it from the Help menu along the top of the
program screen. It will explain each button and option. This tutorial will show you how to perform
the most common operations and may not cover every individual command. Use the tutorial and
Help files together and you’ll be fine.

When the program initially starts, you’re prompted with a window that offers you various ways to
acquire photos. This window will appear each time you start the program or go to the Get Photo

Note: Graphics and procedures may vary slightly between Windows and Macintosh versions.


To view photos stored anywhere on your system, go to the Get Photo module. Here you can also
acquire photos from cameras, scanners, or other photo-centric devices.

Navigation is fairly simple. Use the Mini Browser on the left side to choose a folder or album (use
the pull-down at the top to choose; you can also choose to acquire a photo from a camera/scanner).


The photos within the selected folder or album will appear.

To the right are the View Mode buttons. Here you can view photos in a number of ways.

When viewing a single photo, use the set of tools along the top of the screen to zoom in/out, skip to
other photos stored in the same location, and rotate the current picture left or right.



When you’re ready to edit a photo, bring it up on the screen and then proceed to the Enhance
module. From there, you can perform various types of modifications.

Use the tools along the top of the screen to rotate and flip a photo in a variety of ways. You can also
save and delete a photo by clicking on the respective icon.

To crop a photo:

1. Click the Crop button in the upper-right corner.
2. Click and drag on the photo to draw a crop box that encloses the area you want to keep. If
you make a mistake, simply single-click anywhere outside the crop box and start over.
3. Keep the “Apply to all layers” box checked.
When you’re ready, click Crop. Everything outside the crop box will be removed.

If you’re not satisfied with the crop, click the Undo button.

Use the Brightness/Contrast option under the Fix button for total control over photo vibrancy. Drag
the sliders until your photo looks vivid and crisp. You may also want to fiddle with the
Hue/Saturation and Sharpen/Blur options to further touch-up your picture.


You can choose between “Auto Detect” and “Manual.” When using “Auto Detect,” simply move
the mouse over the red part of the eye and click. The manual option lets you define the size of the
affected area by moving a slider.

To resize a photo, simply enter in the pixel values that you want. It may be easier to change by
percentage instead of pixels. For example, if you enter in “50%,” the photo will be resized to half
the original size. Leave the “Keep Aspect Ratio” box checked to prevent distorted photos. When
you’re ready, click Apply.



A variety of tools can be found in the Create module that let you touch-up and liven photos with the
addition of various frames, borders, edges, and effects. The Help file describes each tool in detail,
but we’ll walk you through some of the more engaging procedures here.

Cloning lets you effectively paint over damaged areas of a photo by copying--or “cloning”--another
part of the photo over the damaged section. You can also duplicate objects.
To clone:

1. Choose the Clone tool from the Paint section.
2. Move your mouse over the area you want to clone. Hold the Shift key and then single-click.
This sets the “clone source.”
3. Move your mouse to the area that you want to paint over. Click and drag (don’t let go of the
mouse button!). As you paint, you will see the paint from the clone source appear.


An entire library of clip art is included, allowing you to add fun and humorous images over any
photo. You can move, resize, and rotate any clip art image.

• Click and drag a piece of clip art to move it.
• Click and drag a corner to adjust the size.
• Click and drag the top anchor to rotate.


Freely add titles, captions, quotes, or catchphrases to your pictures. All of the text editing options
are consistent with most word processors. You can change the font, size, style, alignment, and color.
You can even add multiple text layers (click “New Text”). Text can be modified just like clip art
(you can resize, move, and rotate).


In addition to simply editing photos and including various creative templates and effects, you can
also create calendars and “PhotoBooks.”


With just a few clicks you can create a yearly, monthly, or 12-month calendar.
1. First, choose the type of calendar you want to create.
2. Set the month (if applicable) and year.
3. Choose your calendar template/design.
You can click/drag your photo to move, resize, and rotate it within the calendar.

A “wizard” walks you through the setup of a PhotoBook. Simply follow the instructions and you’ll
be fine. Once the design and template have been set, all you need to do is click and drag photos to
the empty spots on each page. You can add and edit clip art, too.


ArcSoft PhotoImpression lets you print photos in a variety of ways. You can print single photos or
multiple images across multiple pages.

• From the Page Layout tab, choose “Standard Printing” to print photos at standard sizes, such
as 5” x 7” and 8” x 10”.
• Choose “Custom Printing” to alter the number of photos printed per page, as well as the


spacing between the various photos.
• Keep the “Auto Crop Photos” box checked to have the program automatically crop and size
your photos so that they fit optimally within the print template.
• Some of your photos may have a low resolution, and may not print very clearly. When
applicable, check the “Resize All Photos for Best Print Quality” box. ArcSoft
PhotoImpression will resize your image to a size that yields a higher quality.


You never again need to worry about your friends and family receiving photos that are too big and
take forever to download. ArcSoft PhotoImpression makes it easy to send your pictures to any email

1. Choose your email application from the pull-down.

2. Select the photo size. If you’re sending a photo that’s only going to be seen on a computer,
choose “Small.”


Today, megapixel cameras are common and almost everyone can take high-quality pictures.
However, these pictures are often very large, and only need to be so when you’re printing them. So
if you’re sending pictures through email, you’ll probably want to always use the “Small” option
unless you’d like the recipient to print the photo as well.


ArcSoft Funhouse allows you to create unique, fun images by combining two or more photos
together — put your face on famous monuments, magazine covers, celebrity bodies, animation
cells, or any other type of picture. Swap heads with family members, or put a friend’s face on the
family dog.
The program comes with several ready-to-use templates. These templates are organized into unique
categories. Each template has one or more “masks”—areas that are cut out so that you can insert
your own images. Typically, if there is a person involved, the mask will cover the face of that
person so that it can be replaced with a face from one of your pictures. In addition to having these


built-in templates, you can also create your own using your personal collection of digital images.
Creating a Funhouse Image
The creation procedure is extremely simple. There are five easy steps. Each step is listed vertically
along the left side of the program desktop:

In this step, you will select the template for your project. A “template” is the primary image in
which other images will be inserted. You can think of a template as the background, or scene, of
your Funhouse image. Within this scene, you’ll insert your own images to make it unique.
Click the Get Template icon on the left side of the screen. You’ll be taken to the Template Screen,
where you can preview, create, and select your Funhouse template. The left side of this screen will
contain a pull-down that contains several template categories. Use this pull-down to select a
desired category. Once you select one, you’ll be able to preview each template within the category.
Choose the “My Templates” category to view, edit, and create your own templates (see the
“Creating Your Own Templates” section).
When you click a template thumbnail, it will appear in the main preview window. Notice that on the
template there will be one or more colored areas, usually over the face of any figure that may be
present. These are “masks”, which are areas that will end up being replaced by images that you
Click Okay when you’re ready to proceed. You’ll be taken back to the Main Screen and your
selected template will be displayed.
Step 2: Get Photo

Now that your template is selected, you can insert other photos into the masked areas. This is done
through the second step along the left side of the screen. Click the Get Photo icon. You’ll be taken
to the Get Photo Screen.

>From this screen, you can choose one or more (depending on your template) images for insertion
into your selected scene. Choosing photos works similarly to choosing a template, but there are
additional options.


Photo Mask

– Click on the respective button to insert an image into the associated mask. All three of these
buttons may not be available. If your selected template only has one mask, only the first button
will be available.
Use the pull-down to select an album. Select “New” to create a new one. Albums contain
thumbnail links to images stored on your system. Click Open to add photos to an album. Click
Acquire to capture images from external devices. Click Delete to remove a thumbnail from an
album (you can also choose to delete the source file).
Once you select a photo, it will appear within the appropriate mask on the screen. Click the other
Photo Mask buttons and select other photos. Remember, you can only select as many photos as
there are masks on your template.
Step 3: Fine-Tune

– Even though your selected photos are inserted into the template, they likely need to be altered in a
few ways so that they look like they’re naturally part of the scene. You can make these adjustments
on the Fine-Tune Screen. Click the Fine-Tune icon to get to this screen.
From this screen, you can apply various edits and enhancements to each included image.

– Select an image from the Photo Mask buttons. Once you’ve selected an image, any changes you
make will be applied to that image only.

– This command flips the selected image so that it looks like a mirror image.

– These buttons make the selected image larger or smaller within the template.


– These buttons slightly rotate the selected image in the indicated direction.

– Use these buttons to move the selected image within the template. Alternately, you can click and
drag the image directly on the preview.

– By enabling color matching, the program will apply a series of enhancements to make the tone of
the inserted image match the tone of the template. The three sliders allow you to adjust the image
brightness, contrast, and saturation (color intensity), respectively.

– You can zoom in and out on the selected inserted image by clicking the “+” and “”buttons.

– Use these buttons to capture an image from an attached video device directly into the template.
Click the first button to capture. Click the middle button to toggle your video device on/off. The
third button lets you adjust the settings specific to your selected device.

Step 4: Add Text

Add text to your scene to make it even more unique and personal. Click on the Add Text button to
open the Text Window.

Standard text options are available here. Type in your text in the text box, and choose your
formatting options. You can even add a shadow to the text. If you do so, you can click and drag the
shadow within the preview box to place it any way you like. When you’ve finished, you can click
and drag the text to position it anywhere on the image.


Step 5: Print Preview

Once you’ve completed your Funhouse image, you’re ready to print it.
Click the Print Preview button on the Main Screen to go to the
Print Screen.

From this screen, you have complete control over how your image prints. Click and drag the image
to move it about the page. Click and drag the corners of the image to resize it. You can set the
number of copies you’d like printed (Copies), view and edit your printer settings (Printer Setup),
center the image on the screen (Center), and change the paper orientation (Orientation) between
portrait and landscape. If your image is taller than it is wide, you’ll want to stay in the portrait
format. If your image is wider than it is tall, you might want to consider printing in the landscape
format (you’ll be able to make a bigger print).
Saving Images
To save your image, click Save as on the Main Screen. A window will appear. From the “Save in”
pull-down, choose the directory to which the file will be saved. In the “File name” field, type in a
unique name for the file. From the “Save as type” pull-down, choose the file format. If you only
plan on displaying the image on a computer, or emailing it to others, you’ll want to use the JPG file


Creating Your Own Templates
>From the “My Templates” category on the Get Template Screen, click New.You’ll be
taken to the Create Mask Screen. From here, you can open images and create up to three masks.
You’ll then be able to insert other photos into each mask to create your Funhouse image. The tools
described below can be used to create and modify your masks.

– These tools are used to manually add or remove a masked area. Select the appropriate tool, then
click and drag on your image to set the mask area (or remove the mask area). Alternately, you can
add or remove a mask by clicking at various points — the mask border will be drawn from point to
point. Double-click to close the masked area.

– Several brush sizes are available for you to use. Select a brush when you use the Paint, Eraser, or
Blur tools to create a mask.

– Use the Paint tool to draw a mask on the image. Using your mouse, click and drag to create a
mask. To erase any masked area, use the Eraser tool. It works the same way as the Paint tool, except
it removes masked areas instead of creating them. The Blur tool is excellent for creating a soft edge
around masked areas. By blending a mask around the edges, it will look much nicer when a photo is
inserted into the mask. When using any of these tools, you can select various brush sizes.

– Use these sliders to adjust the brightness, contrast, and saturation of the template.

Emailing Images
Once your Funhouse image is complete, you can email it by clicking the Send button on the Main
Screen. You will be asked to choose either AOL or another MAPI-compliant program. Make the
appropriate choice, then click OK. You’ll see that the image file size is listed, along with the time it
will take to email the image at different Internet connection speeds.