USB 2.0 10/100Mbps Adapter
Attached USB Type A cable
Fast Ethernet Port
10/100Mbps Fast Ethernet adapter for PC
with USB 2.0 Type A cable/plug
USB 2.0 Fast Ethernet Adapter The DUB-E100 is a high-speed USB 2.0 10/100Mbps Fast Ethernet adapter for Windows-based desktop and notebook PCs. This adapter is designed to simply plug into any available Universal Serial Bus (USB) port on your computer to connect you to a Fast Ethernet network. Based on USB 2.0, the adapter extends the transfer speed of earlier USB Fast Ethernet adapters to true 10/100Mbps connectivity. USB 2.0 for True 10/100Mbps Speed The USB port of the adapter gives you throughput of up to
adapter is hot pluggable. The DUB-E100 is equipped with
480Mbps to your computer. That's about 40 times faster
an attached USB 2.0 cable that directly connects to any
than USB 1.1, the earlier USB specification. Now you can
USB port on your computer. It is backward compatible
take full advantage of your Fast Ethernet network speed to
with USB 1.1, so you can use the adapter with USB 1.1
transfer files, send e-mail and upload/download images.
ports as well (in case no USB 2.0 port is available). The DUB-E100 represents the simplest way to connect your USB Plug-and-Play
computer to an Ethernet-based network.
As a USB device, this adapter eliminates the need to open your computer's cover to plug a network card into an Energy Saving Suspend/Resume Function
expansion slot. It also saves your notebook's PC Card slot
The DUB-E100 supports USB's energy saving suspend
for other use. Installation and use are further simplified by
and resume function to minimize power consumption,
living up to USB's out-of-the-box installation approach to
which is especially useful for laptop/notebook users.
connecting computer peripherals. You will not have to set
Power is provided directly by the USB bus, eliminating
IRQ's and other settings for your network connection.
the need for an external AC power adapter.
configuration is automatic at computer power up, and the Features 10/100Mbps RJ-45 port for connection to Fast Ethernet Bus-powered from USB host or USB hub, no external AC switch power adapter needed USB 2.0 port with attached USB Type A cable for direct Embedded 7K x 16-bit SRAM buffer connection to PC host Energy saving suspend/resume function Ethernet port supports auto-sensing speed, full/half Runs Windows 98 SE, ME, 2000, XP duplex auto-negotiation Plug-and-Play installation, hot-swappable DUB-E100 Technical Specifications
USB 2.0 10/100Mbps Adapter USB Standards - USB 1.0, 1.1, 2.0 - OHCI - EHCI LAN Standards - IEEE 802.3 10BASE-T Ethernet - IEEE 802.3u 100BASE-TX Fast Ethernet - ANSI/IEEE 802.3 NWay auto-negotiation Bus-power Supplied Up to 500mA Ports - RJ-45 -10/100Mbps Fast Ethernet port - USB 2.0 port directly attached to Type A cable Diagnostic LEDs - Power/Link - Tx/Rx Physical & Environmental Operating Voltage
2.5W, 0.5A @ 3.3VDC +/- 10% Power Consumption 150 mA @ 3.3VDC Dimensions 81 (L) x 52 (W) x 28 (H) mm Weight
100 grams C I A N TIO U N M M C O O C MM L A I Operating Temperature S R S E IO D E N F
0 - 55 C U S A Storage Temperature -20 - 70 C Ordering Information Non-Operating Humidity DUB-E100 USB 2.0 10/100Mbps Adapter
0% - 95% non-condensing Operating Humidity 5% - 95% non-condensing Emission (EMI) - FCC Class B - CE Class B O.S. Support Windows 98SE, ME, 2000, XP
Specifications subject to change without prior notice.
D-Link is a registered trademark of D-Link
Corporation/D-Link System Inc. All other trademarks belong to their proprietors.
TEL: 49-61- 96779900
TEL: 46-(0)8-564-61900 FAX: 46-(0)8-564-61901
TEL: 86-010-8518-2533 FAX: 86-010-8518-2250
South America TEL: 56-2-232-3185
Rev. 01 (Dec. 2002)
Printed in Taiwan