For Business-Class
Wireless 108G Exterior Access Point
+ Water/dustproof IP65 Standard6
+ Embedded 9dBi Panel Antenna
+ Connector for Optional High Gain
Multiple Operation Modes
+ Access Point
+ WDS with AP
+ Wireless Client
High Performance
The DAP-3220 Wireless 108G Exterior Access Point however, disable this function, so wireless users at
is the ideal solution for users that need network and an office can share hard disks and information, and
Wi-Fi Internet access at al times. It is designed to peripherals such as wireless printers. The DAP-
+ IEEE 802.11g Wireless Standard
be fully functional in enclosed outdoor environments 3220 also supports AP grouping, al owing several
+ Up to 54Mbps Wireless Speed
such as cafes, patios and other roofed areas. The access points to balance wireless network traffic
DAP-3220 al ows 802.11b/g devices to connect with and wireless clients among the AP with the same
+ D-Link 108G Technology with up to
speeds of up to 108Mbps when using 108G Turbo SSID and different non-overlapping frequency
108Mbps Wireless Speeds *
Mode*. The DAP-3220 has a watertight housing, a channels.
built-in heater and a temperature sensor. It supports
Advanced Security Features
802.3af Power over Ethernet (PoE), and can be Network Management
placed at outdoor locations where power outlets Network administrators can manage DAP-3220
+ Multiple SSID and 802.1Q VLAN
are not easily accessible. Besides functioning as settings via web-based configuration or Telnet.
an AP, this device can also be configured to operate Administrators can use a Windows-based utility
+ WPA/WPA2-Enterprise/Personal
as a Wireless Distribution System (WDS) to act as cal ed AP Manager to automatical y locate all
a bridge for linking together networks in different wireless devices instal ed on the network and do
bulk configuration of multiple AP to save time and
+ 64/128/152-bit WEP Encryption
+ MAC Address Filtering
Advanced Network Security
+ Rogue AP Detection
The DAP-3220 supports 64/128/152-bit WEP data
encryption and WPA/WPA2 security functions. In
addition, it provides MAC Address Filtering to control
Convenient Outdoor
user access, and the Disable SSID Broadcast
function to limit outsiders’ access to the internal
+ 802.3af Power over Ethernet (PoE)
Network Flexibility and Efficiency
+ Locking Brackets Included
The DAP-3220 supports up to 8 SSID, al owing the
administrators to logically divide the access point
into several virtual access points al within a single
Easy Management
hardware platform. Rather than having separate
+ Web Browser (HTTP, HTTPS)
networks with several access points, administrators
can deploy one single AP to support more than
+ Telnet/SSH
one application, such as public Internet access
+ SNMPv1/v2c/v3
and internal network control to increase flexibility
+ AP Manager II Software Included
and keep costs down. The DAP-3220 supports
802.1Q VLAN Tagging, operating with multiple
* 108Mbps Turbo mode only available when operating with
SSID to segment traffic to enhance performance
other D-Link 108G wireless devices
and security. The DAP-3220 provides WLAN STA
partitioning, a function useful for deployments such
as hot spots. With station-to-station partitioning
enabled, security is enhanced, since wireless
users cannot peek at each other, and the possibility
for data thievery is reduced. Administrators can,

Wireless 108G Exterior Access Point
Technical Specifications
+ IEEE 802.11b/g WLAN
+ IEEE 802.3/802.3u Ethernet
+ IEEE 802.3x Flow Control
+ IEEE 802.3af PoE
Ethernet Interface
+ 10/100BASE-TX Ethernet port
Radio and Modulation Type
For 802.11b:
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
For 802.11g:
+ BPSK @ 6 and 9Mbps
+ QPSK @ 12 and 18Mbps
+ 16QAM @ 24 and 36Mbps
+ 64QAM @ 48 and 54Mbps
+ DBPSK @ 1Mbps
+ DQPSK @ 2Mbps
+ CCK @ 5.5 and 11Mbps
Operating Frequency
For 802.11b:
+ 2400 to 2497MHz
For 802.11g:
+ 2400 to 2483.5MHz
Channel Numbers
+ 11 Channels (FCC)
+ 13 Channels (ETSI)
Data Rates 1
+ 802.11g: 108,54, 48, 36, 24, 18, 12, 9 and 6Mbps
+ 802.11b: 11, 5.5, 2, and 1Mbps
Maximum Transmit Output Power 2
17dBm (typical)
Embedded 9dBi patch antenna
RN-P N type connector for optional antenna5
Receiver Sensitivity
+ For 802.11b, at 8% PER:
11Mbps: –83dBm
+ For 802.11g, at 10% PER:

Wireless 108G Exterior Access Point
+ 64/128/152-bit WEP data encryption
+ TKIP, AES support
+ MAC address filtering user access
+ WLAN STA partitioning
+ Multiple SSID for network segmentation
+ SSID broadcast disable function
+ 802.1Q VLAN Tagging
+ Rogue AP detectionl
Quality of Service
+ Wireless Multimedia (WMM)
Configurable Operation Modes
+ Access Point
+ WDS with AP
+ Wireless Client
Performance Enhancement
+ AP grouping for load balance
Device Management
+ Web Browser Interface:
- Secure HTTP (HTTPS)
+ AP Manager II
+ SNMP support:
- D-View module
- Private MIB
+ Command Line Interface:
- Telnet
Diagnostic LEDs
+ Power
Accessories Provided for Outdoor Installation
+ PoE base unit
+ Ethernet cable (4 meters long)
+ Set of grounding wires
+ Wall mount
+ Pole mount (option) 3

Wireless 108G Exterior Access Point
Operating Voltage
48VDC +/- 10% for PoE
Power Consumption
+ 13.5 watts (max.) with PoE (with heater ON) 4
+ 190 (L) x 160 (W) x 55 (H) mm
+ 649g (Without mounting kit)
Operating Temperature
-20˚ to +60˚ C
Storage Temperature
-20˚ to +65˚ C
Operating Humidity
10% to 90% non-condensing, all-weather enclosure
Regulation Certification
+ FCC Class B
+ CE
+ IP 65
+ C-Tick
+ Wi-Fi
+ IC
+ CSA International
1 54Mbps maximum wireless signal rate derived from IEEE standard 802.11b and 802.11g specifications. Actual data throughput will vary. 108Mbps when operating
with other D-Link 108G wireless devices. Network conditions and environmental factors, including volume of network traffic c, building materials and construction,
and network overhead lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
2 Maximum power setting will vary according to individual country regulations.
3 This device can be mounted on a pole using an optional mounting kit (part number B15900-0033000).
4 Power consumption may exceed 802.3af PoE standard when heater is in operation; connect this device through the included PoE Base Unit.
5 Embedded patch antenna will be disabled when optional antenna is connected.
6 IP65 standard means the device is protected from dust and low pressure jets of water from all directions - limited ingress permitted. It is recommended to place this
device under a roof.
ACN 052 202 838
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2008 D-Link Corporation. All rights reserved.
Release 04 (August 2009)