! D-Link DFE-550TX with SNMP Agent ! Printed Quick Installation Guide ! CD with Manual and Drivers If any of the contents are missing, please contact the reseller.
This installation guide will instruct you on how to monitor your workstation from another with the SNMP Agent feature on the DFE-550 TX. Install the DFE-550 TX driver Make sure to configure the IP address, subnet mask, and default gateway. Install onto the CD drive the SNMP Agent software
For example, type G:\PC_Agent.exe
After you click OK,the Install Shield Wizard page will appear:
Click Next and the following Choose Destination Location page will appear: Click Browse to select another folder to install PC Agent. Otherwise click Next to select the default folder C:\Program Files\D- Link\PC Agent.
The Install Shield Wizard will come to completion. Click Finish to restart the computer.
Go to Start#Programs#D-Link PC Agent#D-Link PC Agent Windows will prompt you to select a default card:
You may also enter Personal Settings (Name, Location, Contact):
After you enter personal settings and click OK,the D-Link PC Agent becomes an icon in the taskbar.
Double-click the D-Link PC Agent icon to bring up the D-Link Ethernet Adapter Agent:
The Configuration tab allows you to pick which card the agent is for.
The Error Log tab lists error messages. You may save them by clicking Save or eliminate them by clicking Clear.
Under Options check Б─°Auto launch when Windows start upБ─² so that the D-Link Ethernet Adapter Agent will automatically appear when Windows starts up.
Click Personal to enter settings for name, location, and contact as in Step 3.
Click Password to set the password to desired from default password of Б─°private.Б─²
Now you can use any MIB browser, for example the D-Link MIB compiler, to view information on the workstation with the DFE-550TX card SNMP Agent feature.
The D-Link Network Adapter SNMP Agent supports the following functions of the dlk_pc.mib:
Description The amount of time
since this host was last initialized. The host's notion of
the local date and time of day. The current local time zone, expressed in hours west of Greenwich. If
unknown, the value -
1 shall be returned. hrSystemInitialLoad Device
This index of the hrDeviceEntry pertaining to the device that this host is configured to load its initial operating system configuration from. This object contains the parameter (e.g. a pathname) supplied to the load device
when requesting the initial operating system configuration from that device. The number of distinct users
currently using CPU or memory resources on this host. The number of process contexts
currently loaded or running on this system. The maximum number of process
contexts this system can support. If there is no fixed maximum, the value should be zero. The IP address of the
interface. The IP net mask for
this interface. The default gateway
for this IP interface. The MAC address of this IP interface. For interfaces that do not have such an address
(e.g., a serial line), this object should contain an octet string of zero length. The amount of physical main
memory contained by the host. The (conceptual) table of logical
storage areas on the host. A unique value for
each logical storage area contained by the host. A description of the type and instance of
the storage described by this entry. The size of the storage represented
by this entry, in units of Mega bytes. The amount of the storage represented
by this entry that is allocated, in units of Mega bytes. The number of requests for storage represented by this
entry that could not be honored due to not enough storage. A unique value for each devices contained by the host. The value for
each device must remain constant at least from one re- initialization of the agent to the next re- initialization. A textual description of this device,
including the device's manufacturer. The current operational state of the device described by this row of the table. A value 1 indicates that the current state of the device is unknown. 2 indicates that the device is up and running and that no
unusual error conditions are known. A warning state 3, indicates that agent has been informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be high number of soft errors on a disk. A value of testing (4), indicates that the device is not available for use because it is in the testing state. The down (5) state is used only when the agent has been informed that the device is not available for any use. The number of errors
detected on this device.
In addition, the D-Link Network Adapter SNMP Agent supports an RFC 1213-Mib (DLK).mib and a Transmission.mib.