This product can be set up
using Internet Explorer 6.x
2-Way Audio/Digital Zoom
or above
Internet Camera
Before You Begin
You must have at least the following:
• Windows 98/Me/2000/XP
• A CD-ROM drive
• An available Ethernet connection
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
DCS-3220 2-Way Audio/Digital Zoom Internet Camera
CD-ROM with Manual and Software
CAT5 Ethernet Cable
Camera Stand
Using a power supply
with a different voltage
12V AC Power Adapter
rating will damage this
product and void the warranty.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DCS-3220.07292004

System Requirements
• Internet Explorer 6.x or above
• CPU: 1.7GHz or above
• Memory Size: 128MB (256MB recommended)
• VGA card resolution: 800x600 or above
Note: If using multiple cameras for viewing/recording, the minimum requirements
are a 2.4GHz or above CPU with 512MB memory and a 32MB video card.

Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector
located on the Internet Camera’s back panel and attach it
to the network.
If you connect this camera directly to a PC, you will need a cross-over Ethernet
cable. If you plug the camera into a hub or router, you will be able to use the
cable included with your camera.
Attach the External Power Supply
Attach the external power supply to the DC power input
connector located on the Internet Camera’s back panel
(labeled DC 12V) and connect it to an AC power outlet.
When you have a proper connection, the LED (Light Emitting Diode) on the front of the
camera will turn from red to green. The light may blink on and off and your computer may
show an intermittant loss of connectivity if you have it directly connected to the camera.
This is normal until you have configured your camera.
Power source is confirmed when the LED Power Indicator on the Internet
Camera is illuminated.

Hardware Installation (continued)
Connect an Audio Cable
Connect your speakers to the audio output jack on the
back of the Internet Camera. For details on configuring the
sound settings, please see the manual on the CD-ROM.

Installing the Installation Wizard
Insert the DCS-3220 CD into the
CD-ROM drive.
Click on Install Software
Click on Installation Wizard
Click Next

Installing the Installation Wizard

Click Next
Click Next
Click Finish

Configuring Your Camera with the
Installation Wizard

Double click on the Installation
that was created on
your desktop.
The software will search for cameras.
The Installation Wizard will appear
and show the MAC address of the
DCS-3220 and an IP Address
(which may or may not be correct
depending on what you have your
DCS-3220 connected to). If you
have a DHCP* server on your
network, there will be a valid IP
Address displayed here, indicated
by a “Yes” under the assigned
*A DHCP server is a device that
supplies IP Addresses to its
clients that are on the same

Configuring Your Camera with the
Installation Wizard (continued)

If the Installation Wizard does not display
any devices, lightly insert a paper clip into
the reset opening on the unit’s rear panel
until the light starts to cycle (a series of
blinks) twice, then let go.
Click Search to refresh the
list of cameras if needed.
Once the camera appears,
select the camera by placing
a Checkmark in the box.

Configuring Your Camera with the
Installation Wizard (continued)

Click the Setup button
Enter an administrative password
in the Root password and Confirm
password fields.
Click the Next button
For details on the Date/Time
Settings, please refer to the User
Manual on the CD-ROM.

Configuring Your Camera with the
Installation Wizard (continued)

Uncheck the box labeled
Reset IP address at next boot
Click the Next button
If you need to modify the IP
settings, please refer to the user
manual on the CD-ROM.
Click the Apply button

Configuring Your Camera with the
Installation Wizard (continued)

After the settings have been saved,
the Done button will appear.
Click the Done button
Click the button labeled
Link to Selected Device(s)

Viewing Your Internet Camera
After you click the button
labeled Link to Device(s), the
Installation Wizard will
automatically open your web
browser to the IP address of
the DCS-3220, in this example
it is:
DCS-3220 may have a different
IP Address.
The installation and configuration of the
DCS-3220 Internet Camera is now complete.


Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link Technical Support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
(800) 361-5265
Monday to Friday 7:30am to 12:00am EST
D-Link Technical Support over the Internet: