Contents of Package:
â€˘ D-Link Air DI-514 2.4GHz Wireless Router
Power Adapter â€“ 5V DC, 2.5A
Manual on CD
Printed Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-514 will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller. System Requirements for Configuration:
Computer with a Windows, Macintosh, or Linux-based operating system with an installed Ethernet adapter
3 2. Introduction The D-Link Air DI-514 Wireless Router is an 802.11b wireless router with the added benefits of myriad robust firewall features.It is ideal for those creating their first wireless network, as well as for more advanced users looking for additional management settings and policy-based content filtering. Filters can be set based on MAC address, IP address, URL and/or Domain Name. A simple, yet intelligent, web-based setup wizard makes the DI-514 easy for
any user to quickly and securely connect computers to share a high-speed Internet connection, files, resources, games or just to communicate. An integrated 4-port switch allows direct connection of up to four computers. Several wireless clients can also securely connect to the network using 64 or 128-bit WEP encryption. Additional advanced features include pass-through of multiple concurrent IPSec and PPTP VPN sessions for telecommuters or for anyone who needs to transmit sensitive information more securely. The D-Link Air DI-514 is the ideal networking solution for small offices, home offices, schools, coffee shops and other small businesses that cater to the public. This manual provides a quick introduction to wireless technology and its application as it relates to networking. Please take a moment to read through this manual if you need to get acquainted with wireless technology.
The Auto MDI/MDIX WAN port is the connection for the Ethernet cable
Receptor for the
the Cable or DSL
Pressing the Reset
Button restores the
the cable type when
router to its original
factory default settings.
5 Features and Benefits
â€˘ Built in 4-Port Switch - Connects multiple Ethernet-enabled
(Ethernet network adapters installed) computers and devices to a Broadband (Cable or DSL) modem to share the Internet connection
â€˘ Wireless Connection â€“ Computers and devices with 802.11b
compliant wireless network adapters installed can connect with the
â€˘ Advanced Firewall and Parental Controlfeatures, accessed
through the simple and comprehensive Web-based user interface, include:
â€˘ Content Filtering â€“ Easily applied content filtering based on
MAC Address, IP Address, URL and/or Domain Name
â€˘ Filter Scheduling - Content filters can also be scheduled to
be active on certain days or for a duration of hours or minutes
â€˘ Network Address Translation â€“ NAT allows you to share a
single IP address and protects you from outside intruders gaining access to your private network
â€˘ Multiple Concurrent VPN Sessions â€“ Supports multiple and
concurrent IPSEC and PPTP sessions, so multiple users behind the DI-514 can access corporate networks through various VPN clients more securely
â€˘ Simple Setup Wizard for Easy Installation â€“ The D-Link setup
wizard simplifies the installation process, getting you up and running in just a few clicks
WAN LED - A solid light indicates connection on the STATUS LED -
WAN port. This LED
blinks during data
to indicate device
is functioning properly. POWER LED - A solid light indicates LAN LED -
a proper connection
A solid light
to the power supply. WLAN LED -
A solid light
connection to an
computer on ports
1-4. This LED blinks
during data transmission.
7 3. Wireless Basics
D-Link Air wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings.
A WLAN (wireless local area network) is a cellular computer network that
transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize
WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network.
Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
People use WLAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs â€“ WLANs are easy to set up, manage, change and relocate. Networks that frequently change, both physically and logically, can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot â€“
even outside the home or office.
8 Wireless Basics Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. Scalability â€“WLANs can be configured in a variety of ways to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or
thousands of users, depending on the number of wireless devices deployed. The DI-514 is compatible with the following wireless products (the maximum data transfer speed for the DI-514 is 11mbps):
Â§ D-Link Air DWL-650, D-Link AirPlusâ„˘ DWL-650+, D-Link AirPlus Xtreme â„˘ G DWL-G650 Wireless Cardbus Adapters used with laptop computers
Â§ D-Link Air DWL-520, D-Link AirPlus DWL-520+, D-Link AirPlus Xtreme G DWL-G520 Wireless PCI cards used with desktop computers
Â§ D-Link Air DWL 700AP, DWL-AirPlus DWL-900AP+, DWL-2000AP+ Enhanced 2.4GHz Wireless Access Points
Â§ D-Link AirPlus DWL-800AP+
Enhanced 2.4GHz Wireless Range Extender
Â§ D-Link AirPlus DWL-810+
Enhanced 2.4GHz Ethernet-to-Wireless Bridge
Standards - Based Technology
The IEEE standard-based technology assures that the D-Link Air Products are interoperable with existing compatible 2.4GHz wireless technology. This means you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays.
The technology works by using multiple frequencies in the 2.4GHz range at speeds up to 11 Mbps. D-Link Air products will automatically sense the best possible connection speed to ensure the greatest speed and range possible with the technology.
9 Installation Considerations
D-Link Air DI-514 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however,
that the number, thickness and location of walls, ceilings or other objects that the wireless signals must pass thru may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the DI-514 and your
receiving device (e.g., the DWL-650) to a minimum - each wall or ceiling
can reduce your D-Link Air Wireless productâ€™s range from 3 to 90 feet (1 to 30 meters.) Position your receiving devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between routers and computers. A wall that is
1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials can impede the wireless signal - a solid metal door or
aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways whenever possible.
4. Keep your product away (at least 3 to 6 feet or 1 to 2 meters) from
electrical devices or appliances that generate RF noise.
10 4. Getting Started
There are basically two modes of networking.
â€˘ Infrastructure â€“ using a Wireless Router such as the DI-514, or an
â€˘ Ad-Hoc â€“ directly connecting to another computer, for peer-to-peer
communication, using wireless network adapters on each computer, such as two or more DWL-650 wireless Cardbus adapters.
On the following page we will show you an example of an Infrastructure Network using the DI-514. The Infrastructure Network example shown on the following page contains the following D-Link network devices (your existing network may be comprised of other devices):
â€˘ A wireless Router - D-Link Air DI-514 â€˘ A laptop computer with a wireless adapter - D-Link Air DWL-650
â€˘ A desktop computer with a wireless adapter - D-Link Air DWL-520
â€˘ A desktop computer with an Ethernet adapter â€“ D-Link DFE-530TX+ â€˘ A Cable modem - D-Link DCM-201
Getting Started Setting Up an Infrastructure Network Please remember that D-Link Airwireless devices are pre-configured to connect together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
Consult with your Cable/DSL provider for proper installation of the
Connect the modem to the DI-514 Wireless Broadband Router. See the Quick Installation Guide included with the router.
If you are including a desktop computer (Computer 1) in your
network, you can install the D-Link DFE-530TX+Ethernet NIC
adapter into the desktop computer.
See the Quick Installation Guide
included with the DFE-530TX+.
Install the drivers for the wireless network adapter (such as the D-Link Air DWL-650) into the laptop computer. See the Quick Installation Guide included with the DWL-650.
If you are including a desktop computer wirelessly (Computer 2),
install the D-Link Air DWL-520 wireless adapter into the desktop computer. See the Quick Installation Guide included with the DWL- 520.
5. Using the Configuration Menu
Whenever you want to configure your network or the DI-514, you can access the Configuration Utility by opening the web-browser and typing in the IP Address of the DI-514. The DI-514 default IP Address is shown below:
â€˘ Open the web browser
â€˘ Type in the IP Address of
the Access Point
(The IP Address shown in the example above is the default setting. If you have changed the IP Address of the DI-514 to conform to a network, then input that IP Address in the web browser, instead of the default IP Address shown.)
â€˘ Type admin in the User Name
Connect to 192.168.0.1
field (lower case)
â€˘ Leave the Password blank
â€˘ Click OK
Setup Wizard The Setup Wizard page is the first page that appears when logging into the web-based management interface. The Setup Wizard is a utility used to quickly configure the DI-514. It will guide you through four quick and basic steps to help you connect to your ISP. You will be connected to your ISP (Internet Service Provider) and have Internet access within minutes.
Home > Wizard
Wireless Wireless Settings are settings for the (Access Point) Portion of the Wireless Router. Here you can change the wireless settings to fit an existing wireless network or to customize your wireless network.
Home > Wireless
14 SSID Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSIDâ€™s factory default setting is â€śdefaultâ€ť. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Channel Indicates the channel setting for the DI-514. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network.
WEP Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. The DI-514 supports 2 levels of WEP
Encryption: 64-bit encryption and 128-bit encryption. WEP is disabled by default. The WEP setting can be changed to fit an existing wireless network or to customize your wireless network.
Key Type The Key Types that are supported by the DI-514 are HEX (Hexadecimal) and ASCII (American Standard Code for Information Interchange.) The Key Type can be changed to fit an existing wireless network or to customize your wireless network.
KEYS Keys 1-4 allow you to easily change wireless encryption settings to maintain a secure network. Simply select the specific key to be used for encrypting wireless data on the network.
WAN WAN is short for Wide Area Network. The WAN settings can be referred to as the Public settings. All IP information in the WAN settings are public IP addresses which are accessible on the Internet. The WAN settings consist of three main options: Dynamic IP Address, Static IP Address, and PPPoE. Select the appropriate option and fill in the information needed to connect to your ISP.
Home > WAN
Please be sure
to remove any existing PPPoE client software
installed on your computers
Dynamic IP Address Choose Dynamic IP Address to obtain IP address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. Host Name: The Host Name field is optional but may be required by some ISPs. The host name is the device name of the Router.
MAC Address: The default MAC address is set to the WAN's physical interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address. It is not recommended that you change the default MAC address unless required by your ISP.
16 Static IP Address
Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address: Public IP address provided by your ISP. Subnet Mask: Subnet mask provided by your ISP. ISP Gateway Address: Public IP address of your ISP that you are connecting to. Primary DNS Address: Primary DNS (Domain Name Server) IP provided by your ISP Secondary DNS Address: optional
Please be sure to remove
any Client Software program on your computer before you start your configuration of the DI-514 Router. Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL
services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Dynamic PPPoE: PPPoE connection where you will receive an IP address automatically from your ISP Static PPPoE: PPPoE connection where you have an assigned (static) IP address User Name: Your PPPoE username provided by your ISP Password: Your PPPoE password provided by your ISP Retype Password: Re-enter PPPoE password Service Name: Enter the service name provided by your ISP. (optional) IP Address: This option is only available for Static PPPoE. Enter in the static IP address for the PPPoE connection. Primary DNS Address: Primary DNS IP provided by your ISP Secondary DNS Address: optional Maximum Idle time: The amount of time of inactivity before disconnecting your PPPoE session. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the defined Maximum Idle Time, then the connection will be dropped. Either set this to zero or enable Auto-reconnect to disable this feature. MTU: MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to change the MTU settings in order to work correctly with
your ISP. Auto-reconnect: If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped.
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-514. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
IP Address: The IP address of the LAN interface. The default IP address is 192.168.0.1. Subnet Mask: The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0. Local Domain Name: This field is optional. Enter in the your local domain name.
19 Home > DHCP DHCP DHCP stands for Dynamic Host Control Protocol. The DI-514 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to â€śObtain an IP Address Automatically.â€ť When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-514. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Starting IP address: The starting IP address for the DHCP serverâ€™s IP assignment. Ending IP address: The ending IP address for the DHCP serverâ€™s IP assignment. Lease Time: The length of time for the IP lease.
20 Advanced > Virtual Server
Virtual Server The DI-514 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
The DI-514 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DI-514 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-514 redirects the external service request to the appropriate server within the LAN network. The DI-514 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer.
Each virtual services that are created will be listed at the bottom of the screen in the Virtual Servers List. There are already pre-defined virtual
services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service.
Name: The name referencing the virtual service. Private IP: The server computer in the LAN (Local Area Network) that will be providing the virtual services. Protocol Type: The protocol used for the virtual service. Private Port: The port number of the service used by the Private IP computer. Public Port: The port number on the WAN side that will be used to access the virtual service. Schedule: The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled.
Example #1: If you have a Web server that you wanted Internet users to access at all times, you would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer 192.168.0.25. HTTP uses port 80, TCP. Name: Web Server Private IP: 192.168.0.25 Protocol Type: TCP Private Port: 80 Public Port: 80 Schedule: always
Click on this icon to edit the virtual service.
Click on this icon to delete the virtual service. Example #2:
If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP.
Name: FTP Server
Private IP: 192.168.0.30 Protocol Type: TCP Private Port: 21 Public Port: 2100 Schedule: From: 01:00AM to 01:00AM, Sat to Sun
â€˘ All Internet users who want to access this FTP Server must
connect to it from port 2100. This is an example of port redirection and can be useful in cases where there are many of the same servers on the LAN network.
Advanced > Applications
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-514. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound traffic.
The DI-514 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Note! Only one PC can use each Special Application tunnel.
Trigger Name: This is the name referencing the special application. Trigger Port: This is the port used to trigger the application. It can be either a single port or a range of ports. Trigger Type: This is the protocol used to trigger the special application. Public Port: This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Public Type: This is the protocol used for the special application. Schedule: This is the schedule of time when the special application will be enabled.
Advanced > Filters Filters Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-514 can be setup to deny internal computers by their IP or MAC addresses. The DI- 514 can also block users from accessing restricted web sites. IP Filters Use IP Filters to deny LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for the specific IP address. IP: The IP address of the LAN computer that will be denied access to the Internet. Port: The single port or port range that will be denied access to the Internet. Schedule: This is the schedule of time when the IP Filter will be enabled.
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Internet. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
URL Blocking is used to deny LAN computers from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display.
Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp. It can also allow computers to access specific sites and deny all other sites.
Advanced > Firewall
Firewall Rules is an advance feature used to deny or allow traffic from passing through the Broadband Router. It works in the same way as IP
Filters with additional settings. You can create more detailed access rules for the DI-514. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall Rules contains all network firewall rules pertaining to IP (Internet Protocol).
In the Firewall Rules List at the bottom of the screen, the priorities of the rules are from top (highest priority) to bottom (lowest priority.)
Note: The DI-514 MAC Address filtering rules have precedence over the Firewall Rules.
Advanced > DMZ
If you have a client PC that cannot run Internet applications properly from behind the DI-514, then you can set the client up to unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort.
27 Advanced > Performance Beacon Interval - Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended.
RTS Threshold - This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be
Fragmentation - This value should also remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2,346. Setting the Fragmentation Threshold too low may result in poor performance. DTIM - (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
Basic Rates â€“ Select the data rate. Default is 1-2-5.5-11Mbps.
TX Rates â€“ Select the data rate. Default is 1-2-5.5-11Mbps.
Preamble Type - Short preamble is the default setting. (High traffic networks should use the shorter preamble type.) The preamble defines the length of the CRC block used in communication between the Access Point and the roaming wireless Network adapters. (Cyclic Redundancy Check is a common technique for detecting data transmission errors)
Authentication - Select Open system, Shared Key or Auto
Open System - The DI-514 will be visible to all devices on the network. This is the default setting. Shared Key - In this mode, in order to access the DI-514 on the network, the device must be listed in the MAC Address Control List. Auto - In this mode, all devices on the network can access the DI-514.
SSID Broadcast - Enable is the default setting. Choose Enable to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Choose Disable if you do not wish to broadcast the SSID over the network.
Tools > Admin Admin At this page, the DI-514 administrator can change the system password. There are two accounts that can access the Broadband Routerâ€™s Web- Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes.
Remote Management Remote Management allows the DI-514 to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can
browse the built-in web pages to perform â€śAdministratorâ€ť tasks. This feature enables you to perform â€śAdministratorâ€ť tasks from the remote (Internet) host. IP Address: Internet IP address of the computer that has access to the Broadband Router.It is not recommended that you set the IP address to * (star), because this allows any Internet IP address to access the Broadband Router, which could result in a loss of security for your network.If you elect to enable Remote Management, enter the IP Address of your remote location. Port: Select the port number used to access the Broadband Router. Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the Broadband Router and 8080 is the port used for the Web-Management interface. Tools > Time
Time The system time is the time used by the DI-514 for scheduling services. You can manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP
server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will automatically adjust on those dates. Tools> System System Settings The current system settings can be saved as a file onto the local
hard drive. The saved file or any other saved setting file can be loaded back on the Broadband Router. To reload a system settings file, click on Browse to browse the local hard drive and locate the system file to be used. You may also reset the
Broadband Router back to factory settings by clicking on Restore.
Firmware Upgrade Tools > Firmware
You can upgrade the
firmware of the Broadband
Router at this page. Make
sure the firmware you want
to use is on the local hard
drive of the computer. Click
on Browse to browse the
local hard drive and locate
the firmware to be used for
the update. Please check
the D-Link support site for
firmware updates at
Tools > Misc
These are additional tools and features of the Broadband Router.
Ping Test This useful diagnostic utility
can be used to check if a computer is on the Internet. It sends ping packets and listens for replies from the specific host.
Reboot Device If for any reason the Broadband Router is not responding correctly, you may want to reboot the Broadband Router.
31 Block WAN Ping - When you â€śBlock WAN Pingâ€ť, the DI-514 will not respond to ping commands from the Internet. Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is
valid. Discard PING from WAN side: By enabling this option, the DI-514 will not reply to ping (ICMP) request packets from the Internet. VPN Pass-Through - The Broadband Router supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the Broadband Router. This is useful when you have many VPN clients on the LAN network. Dynamic DNS - Fill in the required fields to use the Dynamic Domain Server feature. Status > Device Info Device Information This page in the Configuration Utility displays the current information for the Broadband Router. It will display the LAN and WAN, Wireless information.
If your WAN connection is
set up for Dynamic IP address a Release button and Renew button will be displayed. Use Release to disconnect from your ISP
and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
This page allows you to observe the DI-514â€™s working status:
â€˘ IP Address: LAN/Private IP Address of the DI-514
â€˘ Subnet Mask: LAN/Private Subnet Mask of the DI-514 WAN
â€˘ IP Address: WAN/Public IP Address
â€˘ Subnet Mask: WAN/Public Subnet Mask
â€˘ Gateway: WAN/Public Gateway IP Address
â€˘ Domain Name Server: WAN/Public DNS IP Address
â€˘ Wan Status: WAN Connection Status Firmware version: Displays the current firmware version WAN MAC Address: Displays the WAN port MAC/hardware address LAN MAC Address: Displays the LAN port MAC/hardware address
Status > Log
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. First Page - The first
page of the log. Last Page - The last page of the log. Previous - Moves back one log page. Next - Moves forward one log page. Clear - Clears the logs completely. Log Settings - Brings up the page to configure the logs. Log Settings Not only does the Broadband Router display the logs of activities and events,
it can be setup to send these logs to another location. SMTP Server/IP Address - The address of the SMTP server that will be used to send the logs.
Email Address - The email address the logs will be sent to. Click on Email Log Now to send the email. Status > Stats Traffic Statistics The Broadband Router keeps statistics of traffic that
passes through it. You are able to view the amount of packets that passes through the Router on both the WAN port and the LAN port. The traffic
counter will reset if the device is rebooted. Status > Wireless Connected Wireless Clients List
The wireless client table displays a list of current connected wireless clients. This table also displays
the time and MAC address of the wireless client connected.
34 6. Troubleshooting
This chapter provides solutions to problems that can occur during the
installation and operation of the DI-514 Wireless Access Point. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. (Note: It is recommended that you use an Ethernet connection to configure the DI-514 Access Point.) 1. The computer used to configure the DI-514 cannot access the Configuration menu.
â€˘ Check that the Ethernet LED on the DI-514 is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted.
â€˘ Check that the Ethernet Adapter is working properly. Please
see item 6 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly.
â€˘ Check that the IP Address is in the same range and subnet
as the DI-514. Please see Checking the IP Addressin Windows XP in the Networking Basics section of this manual. Note: The IP Address of the DI-514 is 192.168.0.1. All the computers on the network must have a unique IP Address in the same range, e.g., 192.168.0.x. and a Subnet Mask of 255.255.255.0. Any computers that have identical IP Addresses will not be visible on the network.
â€˘ Do a Ping test to make sure that the DI-514 is responding.
Go to Start>Run>Type Command>Type ping 192.168.0.1. A successful ping will show four replies.
Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode.
â€˘ Make sure the wireless client is associated and joined with the correct
router. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below. Default
â€˘ Check that the IP Address assigned to the wireless adapter is within
the same IP Address range as the gateway. Since the DI-514 has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no two devices may have the same IP Address. The subnet mask must be the same for all the computers on the network.) To check the IP Address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar > select the Support tab and the IP Address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.)
â€˘ If it is necessary to assign a Static IP Address to the wireless
adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a Static IP Address. See Networking Basics: Assigning a Static IP Address.)
Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.
â€˘ Go to Start â€˘ Right-click on My Computer
â€˘ Click Properties NOTE: Screen shots taken using
Windows XP. If you are using a different Operating System your screen may look different.
â€˘ Select the Hardware Tab
â€˘ Click Device Manager
â€˘ Double-clickon Network Adapters
â€˘ Right-click on D-Link AirPlus DWL-650 Wireless Cardbus Adapter
â€˘ Select Properties to check
that the drivers are installed properly D-Link Air DWL-650 Wireless Cardbus Adapter
D-Link AirPlus DWL-650+ Wireless Cardbus Adapter
â€˘ Lookunder Device Status to check that the
D-Link AirPlus DWL-650 Wireless Cardbus Adapter
device is working properly.
â€˘ Click OK
4. Resetting the DI-514 to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-514 to the factory default settings. Remember that D-Link Plus products network together, out of the box, at the factory default settings.
To hard-reset the D-Link Plus DI-514 to Factory Default Settings, please do the following:
â€˘ Leave the device powered on, do not disconnect the power â€˘ Press the reset button and hold (use a paper clip) â€˘ Keep the button pressed about 10 seconds â€˘ Release the button
The DI-514 will then automatically reboot itself.
39 7. Networking Basics Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work,
using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98.
Go to Start>Control Panel>Network Connections Select Set up a home or small office network
When this screen appears, Click Next.
Networking Basics Please follow all the instructions in this window:
Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown.
Networking Basics Enter a Computer description and a Computer name (optional.)
Enter a Workgroup name. All computers on your network should havethe same Workgroup name.
Networking Basics Please wait while the Network Setup Wizard applies the changes.
When the changes are complete, click Next.
Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Networking Basics In the window below, select the best option. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Format the disk if you wish, and click Next.
Networking Basics Please wait while the Network Setup Wizard copies the files.
Please read the information under Hereâ€™s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on
your network. To continue click Next.
Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard.
The new settings will take effect when you restart the computer. Click Yes to restart the computer.
You have completed configuring this computer. Next, you will need to run
the Network Setup Disk on all the other computers on your network. After
running the Network Setup Disk on all your computers, your new wireless
network will be ready to use.
Networking Basics Naming your Computer To name your computer, please follow these directions:
In Windows XP: â€˘ Click Start (in the
lower left corner of the screen)
â€˘ Right-click on My Computer
â€˘ Select Properties
â€˘ Select the Computer Name Tab in the System Properties window. You may enter a Computer description if you wish, this field is optional.
To rename the computer and join a domain,
â€˘ Click Changeâ€¦
Networking Basics Naming your Computer
â€˘ In this window, enter
the Computer name.
â€˘ Select Workgroup
and enter the name
of the Workgroup.
â€˘ All computers on
your network must
have the same Workgroup name.
â€˘ Click OK
Checking the IP Address in Windows XP
The wireless adapter-equipped computers in your network must be in the
same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following:
â€˘ Right-click on the Local Area Connection icon in the task bar
â€˘ Click on Status
Networking Basics Checking the IP Address in Windows XP This window will
â€˘ Click the Support Tab
â€˘ Click Close
Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:
â€˘ Go to Start
â€˘ Double-click on
Networking Basics Assigning a Static IP Address in Windows XP/2000
â€˘ Double-click on Network Connections
â€˘ Right-click on Local Area Connections.
â€˘ Double-click Properties
Networking Basics Assigning a Static IP Address in Windows XP/2000
Highlight Internet Protocol (TCP/IP)
DWL-650+ Wireless Cardbus Adapter
â€˘ Click Properties â€˘ Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window, below.
â€˘ Input your IP address and subnet mask. (The IP Addresses on your
network must be within the same range. For example, if one computer has an
IP Address of 192.168.0.2, the other computers should have IP Addresses
that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must
be the same for all the computers on the network.)
IP Address: e.g., 192.168.0.2 Subnet Mask: 255.255.255.0
Default Gateway: Enter the LAN IP Address of the wireless router. (D-Link wireless routers have a LAN IP address of 192.168.0.1)
Select Use the following DNS server addresses. Enter the LAN IP address of the wireless router. (D-Link wireless routers have a LAN
IP address of 192.168.0.1)
â€˘ Click OK
You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP Address if you have a DHCP-capable Gateway/Router.)
Networking Basics Assigning a Static IP Address with Macintosh OS X
Go to the Apple Menu and select System Preferences.
Click on Network
Select Built-in Ethernet in the Show pull-down menu.
Select Manually in the Configure pull-down menu.
Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields.
Click Apply Now
Networking Basics Selecting a Dynamic IP Address with Macintosh OS X
Go to the Apple Menu and select System Preferences.
Click on Network
Select Built-in Ethernet in the Show pull-down menu.
Select Using DHCP in the Configure pull-down menu.
Click Apply Now
The IP Address, Subnet mask, and the Routerâ€™s IP Address will appear in a few seconds.
Checking the Wireless Connection by Pinging For Windows XP and 2000:
Go to Start > Run > type cmd. A window similar to Fig. 9.25 will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the Wireless Router or Access Point. A good wireless connection
will show four replies from the wireless router or access point, as shown.
For Windows ME and 98SE:
Go to Start > Run > type command. A window similar to Fig. 9.26 will
appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the Wireless Router or Access Point. A good wireless connection will show four replies from the wireless router or access point, as
External Antenna Type Single detachable reverse SMA
LEDs â€˘ Power â€˘ Status â€˘ WAN â€˘ Local Networkâ€” 10/100 â€˘ WLAN (Wireless Connection)
Operating Temperature 32Â°F to 131Â°F ( 0Â°C to 55Â°C) Humidity 95% maximum (non-condensing) Power Input Power Supply DC 5V, 2.5A
Safety & Emissions â€˘ FCC â€˘ UL
Dimensions â€˘ L = 5.6 inches (142mm) â€˘ W = 4.3 inches (109mm) â€˘ H = 1.2 inches (31mm)
Weight ~2.0 lbs (907g)
Warranty 1 year
56 9. Technical Support Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and within Canada for the
duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.
Tech Support for customers within the United States: D-Link Technical Support over the Telephone:
24 hours a day, seven days a week. D-Link Technical Support over the Internet:
Tech Support for customers within Canada: D-Link Technical Support over the Telephone:
Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet:
57 10. Warranty and Registration
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (â€śD-Linkâ€ť) provides this Limited
warranty for its product only to the person or entity that originally purchased the product from:
D-Link or its authorized reseller or distributor and
Products purchased and delivered within the fifty states of the United States, the District of Columbia,
U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO. Limited Warranty:D-Link warrants that the hardware portion of the D-Link products described below will
be free from material defects in workmanship and materials from the date of original retail purchase of the
product, for the period set forth below applicable to the product type (â€śWarranty Periodâ€ť), except as
otherwise stated herein. 1-Year Limited Warranty for the Product(s) is defined as follows:
Hardware (excluding power supplies and fans) One (1) Year
Power Supplies and Fans One (1) Year
Spare parts and spare kits Ninety (90) days
D-Linkâ€™s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at
no charge to the original owner or to refund at D-Linkâ€™s sole discretion. Such repair or replacement will be
rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new
or have an identical make, model or part. D-Link may in its sole discretion replace the defective
Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is
substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or
replacement Hardware will be warranted for the remainder of the original Warranty Period from the date
of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole
discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original
purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective
Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is
refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product (â€śSoftwareâ€ť) will
substantially conform to D-Linkâ€™s then current functional specifications for the Software, as set forth in the
applicable documentation, from the date of original retail purchase of the Software for a period of ninety
(90) days (â€śWarranty Periodâ€ť), provided that the Software is properly installed on approved hardware and
operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period,
the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Linkâ€™s sole
obligation shall be to replace the non-conforming Software (or defective media) with software that
substantially conforms to D-Linkâ€™s functional specifications for the Software or to refund at D-Linkâ€™s sole
discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to
the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the
Software. Software will be warranted for the remainder of the original Warranty Period from the date or
original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines
in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the
original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-
conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting
any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of
D-Link's products will not be applied to and does not cover any refurbished product and any product
purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers,
or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case,
the product is being sold "As-Is" without any warranty whatsoever including, without limitation, the Limited
Warranty as described herein, notwithstanding anything stated herein to the contrary. Submitting A Claim: The customer shall return the product to the original purchase point based on its
return policy. In case the return policy period has expired and the product is within warranty, the
customer shall submit a claim to D-Link as outlined below:
The customer must submit with the product as part of the claim a written description of the Hardware
defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same.
The original product owner must obtain a Return Material Authorization (â€śRMAâ€ť) number from the
Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product
(such as a copy of the dated purchase invoice for the product) before the warranty service is
After an RMA number is issued, the defective product must be packaged securely in the original or
other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number
must be prominently marked on the outside of the package. Do not include any manuals or
accessories in the shipping package. D-Link will only replace the defective portion of the Product
and will not ship back any accessories.
The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery
(â€śCODâ€ť) is allowed. Products sent COD will either be rejected by D-Link or become the property of
D-Link. Products shall be fully insured by the customer. D-Link will not be held responsible for any
packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the
customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid.
Expedited shipping is available if shipping charges are prepaid by the customer and upon request.
Return Merchandise Ship-To Address USA: 53 Discovery Drive, Irvine, CA 92618 Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailed
warranty information within Canada)
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The
product owner agrees to pay D-Linkâ€™s reasonable handling and return shipping charges for any product
that is not packaged and shipped in accordance w ith the foregoing requirements, or that is determined by
D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Linkâ€™s
judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence,
misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in
the documentation for the product, or if the model or serial number has been altered, tampered with,
defaced or removed; Initial installation, installation and removal of the product for repair, and shipping
costs; Operational adjustments covered in the operating manual for the product, and normal maintenance;
Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;
Any hardware, software, firmware or other products or services provided by anyone other than D-Link;
Products that have been purchased from inventory clearance or liquidation sales or other sales in which
D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE
PRODUCT IS PROVIDED â€śAS-ISâ€ť WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON- INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE
DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH
IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY
COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE
QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF
THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE
UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE
THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY
CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR
COMPUTER PROGRAMS TO WHICH D-LINKâ€™S PRODUCT IS CONNECTED WITH, LOSS OF
INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT
RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE
PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS
LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS
REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.
THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE
PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN
59 WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES
OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some
states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited
warranty provides specific legal rights and the product owner may also have other rights which vary from
state to state.
CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment; such modifications could void the userâ€™s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The antenna(s) used for this equipment must be installed to provide a separation distance of at least
eight inches (20 cm) from all persons.
This equipment must not be operated in conjunction with any other antenna.
For detailed warranty outside the Un ited States, please contact corresponding local D-Link office.
Register your D-Link product online at http://support.dlink.com/register/