This product can be set up
using any current Web browser,

i.e., Internet Explorer or
Ethernet Broadband Router
Netscape Navigator.
and USB Print Server
Before You Begin
If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
It is best to use the same computer that is connected to your modem for
configuring the DI-704UP Broadband Router. The DI-704UP acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents
DI-704UP Ethernet Broadband Router
and USB Print Server

CD-ROM (containing Manual, Warranty and
Print Server Software for Windows)

Ethernet (Straight-Through) Cable
Using a power supply
5V AC Power Adapter
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-704UP. 08152003

Connecting The DI-704UP Broad-
band Router To Your Network

A. First, connect the power adapter to the receptor at the back panel of the
DI-704UP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED lights up indicating proper operation.
B. 1. Power off your Cable or DSL modem; the devices that do not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-704UP should
be powered on and the Cable / DSL modem should be turned off. Cable / DSL
modem (Power Off) – DI-704UP (Power On)
2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable / DSL
modem by turning on the unit or plugging in the power adapter. Cable / DSL
modem (Power On) – DI-704UP (Power On)
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-704UP. The WAN LED light will illuminate to indicate proper connection.
If the WAN LED is not illuminated, please go back to step B1 and repeat the
C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-704UP and an
available Ethernet port on the network adapter in the computer you are using to
configure the DI-704UP. The LED light for LAN Port 1 illuminates to indicate proper
connection. (Note: The LAN Ports on the DI-704UP are Auto-MDI/MDIX. Meaning
you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)
D. The USB port on the DI-704UP is used to connect USB printers only. Connect
one end of the printer cable to your printer and the other end to the DI-704UP.
D. USB Printer Port
B. WAN Port This is for the
You can connect a USB
connection of an Ethernet cable
A. Receptor for
Printer here.
to the Cable or DSL modem
Power Adapter.
C. LAN Ports These are the
Reset Button Pressing this
connections for Ethernet cables
button restores the Router to its
to Ethernet enabled computers.
original factory default settings.

Restart Your Computer
Connecting Additional Computers To
The DI-704UP

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-704UP
Status LED – flashes
WAN LED – a solid light
Printer LED – a solid
consistently to indicate
indicates connection on the
light indicates that
that the DI-704UP is
WAN port. This LED blinks
Printer connection has
working properly.
during data transmission.
been established.
POWER LED – a solid light
light on the port indicates a
indicates a proper connection to
connection to an Ethernet enabled
the power supply.
computer on ports 1-4. This LED
blinks during data transmission.

When you have completed the steps in this Quick Installation
your connected network should look similar to this:
Using The Setup Wizard
Open your Web browser and type
“” into the URL address
box. Then press the Enter or Return key.
The logon pop-up screen appears.
Type “admin” for the username and
leave the password field blank.
Click OK

The Setup Wizard (continued)
Once logged in, the Home screen
Click Run Wizard
You will see the following screens
Click Next
Set up your new password. You have the
option to establish a password.
Click Next

The Setup Wizard (continued)
Choose your time zone from the drop
down list.
Click Next
The Router will attempt to auto-detect your
Internet connection and bring up the appro-
priate screen.
If it cannot auto-detect the Internet connec-
tion, the WAN selection screen appears.
Select your Internet Connection.
If you are unsure of which setting to select,
please contact your Internet Service Provider.
Click Next

The Setup Wizard (continued)
If you selected Dynamic IP Address, this
screen appears: (Used mainly for Cable
Internet service.)
Click the “Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
This setup should be done on the computer
that is registered on the ISP’s network.
Click Next
If your ISP requires a Static IP Address, and
this option is selected, then this screen
Enter the IP address information originally
provided to you by your ISP. Make sure all
required fields are completed.
Click Next
If your ISP uses PPPoE (Point-to-Point
Protocol over Ethernet), and this option is
selected, then this screen appears. (Used
mainly for DSL Internet service.)
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and password pro-
vided to you by your ISP.
Click Next

Your Setup is Complete!
Click Restart
Test Internet Connection.
Once returned to the Home tab, close the web browser.
Click to Exit
Relaunch your Web browser
(i.e., Internet Explorer or
Netscape Navigator), to link
to your favorite Web site to
test your Internet connection.
For additional settings or
information, refer to the
Advanced, Tools, or Status
tabs on the Web-management
interface; or to the Manual
located on the CD.

Installing the Print Server Software

Insert the installation CD-ROM into the CD-ROM
drive. The following window appears
automatically. If not, please run “autorun.exe” on
the CD-ROM.
Click Install Print Server Software
Select your Windows
operating system

Wait until the following Welcome dialog appears.
Click Next
Select the destination folder.
Click Next

Installing the Print Server Software (continued)
Then, the setup program installs the programs
into the destination folder.
When the following window is displayed:
Click Finish
Click OK
After rebooting your computer, the software installation procedure is finished.
Configuring on Windows 98SE/Me Platforms
After you finish the software installation procedure, your
computer will be capable of network printing provided by
the DI-704UP. On a Windows 95/98 platform, open the
Printers window in the My Computer menu.
Now, you can configure the print server of the DI-704UP:
Find out the corresponding icon of your printer, for
example, the Epson Sylus C60. Right click on that
icon, and then select Properties.
The following screen appears:

Configuring on Windows 98SE/Me Platforms (continued)
Click on the Details tab
Choose the “D-Link LPT Port (Print Server)” from the
list attached at the Print To the following port. Be
sure that the Printer Driver item is configured to the
correct driver of your printer.
Click Port Settings
Type in the IP address of the DI-704UP.
Click OK
Configuring on Windows 2000/XP Platforms
Click Port
The configuration procedure for a Windows
2000/XP platform is similar to that of Windows
95/98 except the screen of printer Properties:
Click Configure Port
Type in the IP address of the DI-704UP.
Click OK
(Note: Screen shots are taken in Windows 2000,
similar screens will appear in Windows XP.)


APPENDIX (continued)
To connect to the network, make sure the
network adapter in your computer is configured
properly. Here’s how to configure the network
adapter to obtain an IP address automatically
for the DI-704UP Broadband Router.
For Microsoft Windows XP: Go to Start >
Right click on My Network Places >
select Properties > Right-click on the
Network Connection associated with the
Ethernet adapter and select Properties
(i.e., D-Link DFE-530TX+).
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address

Click OK
Restart your computer

For Apple Macintosh OS X:
Go to the Apple Menu Click on System
and Select Network
Click on

Select Built-in Ethernet
in the show pull down

Select Using DHCP in
the Configure pull down

Click on Apply Now
The IP address information,
the Subnet Mask, the Router’s
IP address and the Ethernet
adapter address appears.



Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link technical support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
(800) 361-5265
Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet: